yeah ...i have no balls...i will be gettting one of the cloned titan bridges ....i have a jupiter 4 port board (which supposedly you can upgrade to a neppie so prob would work) and a spare raspberry pi B+ 512 mb (which I assume is the proper PI for the Titan)......sooooooo

All I have to do is take the Jupiter Board....pop the bridge on it......put the pi on it....re-do the SD firmware and fire it up?

or I suppose you could just fire up the above w/o a cube and see if the stuff comes up as a Tarky Titan IP and all with the firmware etc with no cubes?

I suppose you could fry the pi and/or the 4 port board i doubt the titan bridge would be affected?

Alas NO BALLS we need someone with a barely I mean barely working Titan cube to try this with (or send to someone with proper neppie board)

but that is the somewhat 'likely deluded' thoughts about this on this thread lol

as to 'straight titan controller fixes' you should find a few folk on here who need such..fixes  I'd think? (Vegas?)

Heh went back to my 1st post on bitcointalk I could find in my posted message area (they had a crash so as far as it could go back) here is the link:

https://bt.irlbtc.com/view/249065.msg3158093#msg3158093 sept 15th 2013....


Purchasing KNC products from 'line drawings' rather then a picture (paypal thou via cc) but still...such a newbie here is the gist of it below

revised

10/11/13 'In Progress"   #304x

10/15/13 'Shipped"        #340x


User                        Order #    Date of order    # of Jupiters    # of Saturns    # of Mercury    Country                  Shipping Day    Date of reception

Searing                   #304x         7/1/2013                1                       0                    0             USA                      Oct 15 2013
Searing                   #526x         8/6/2013                0                       1                    0             USA                      Oct   ? 2013




here ya go

Searing


Again #304x as of 10/15/13  is marked as 'shipped'

Searing

Like an idiot I cancelled the SATURN (damn) but was TOO overextended with not knowing if I'd ever get 1) BFL equip or 2) refund...did get a miracle BFL refund 1 year and 20 days
later thru luck of FTC coming after them (3 week window before the FTC shut them down) ...but in 20/20 hindsight I guess it made sense to punt the Saturn...damn should not have done that!

made 53 btc off that Jupiter....good times it ROI'd in like 3 weeks lol


any other good 1st posts you guys can find in your posting thread from back in the day on here...my actual oldest post is this one in the swedish miner area here

(such a cute clueless newbie I was....BTC at the time/date 124 bucks a BTC or so ...I figured I'd never ROI .....even so happy newbie...boy was I wrong 6 weeks after I got the beast 1100 usd btc)

anyway just thought  it was funny my oldest post on here is the above

others have an amusing 1st post on this thread?

Not really off topic but 'sorta' ..tripped over how to get your electric bill reduced big time for your miners (maybe)

below is my link to a thread I made here on bitcointalk on how I managed with a phone call and get winter electric rates for my miners moved to the 'winter elec heat' discount

rate. A drop from 13.7c kwh all last year (this is rate/fees/local/taxes/etc or around 2500 kwh or so for my house a month with 2 Titans divided by my monthly bill..ie real kwh costs!)

to the NEW rate (prob thru may bill or 4-5 months) or 9.27c kwh WOW!

With just a 'phone call' NO inspection etc...this may be a 'fluke' but if you are in USA and have Xcel ...look at the back of your bill for this option. I suspect it would also

apply to other world wide folk that during winter may have the same break in price for 'electric heat' option.

Anyway ...as you can see from my 'explanation' in the long post in thread below...I kinda stumbled into this ..and sat on pins and needles for 1 month till today's bill ...but

IT WAS approved...so man a drop from 13.7c kwh to 9.27c kwh is a really really big deal to me $115 usd a month savings.

You add the already $45 buck savings off my Gas Heating Budget plan (compared to before ASIC's in basement) a combined $160 buck a month savings thru the winter for the electric and

the gas was for all year round!

So if i can 'nurse' the Titans into say next winter.....a 'used' home asic machine with what i managed to pull off in the link below may make it profitable for me to "home mine' yet

into the winter of 2016-2017...assuming as we all wish the halving and such in 2016 ...hopefully ...drives btc and ltc prices UP!

anyway for what it is worth ....the link below..hopefully ..this works for you as well as it did for me..if not you are no worse off electric kwh price wise anyway so imho give it

a shot ..use what you want from how I tripped over this ..and good luck!

https://bt.irlbtc.com/view/1296558.msg13304401#msg13304401

again previous msg ..with the savings of combined $45 in my gas budget year round heating price per month due to miners and this winter electric home heating as primary change
I posted previously plan (which again is true 2500w 24/7 in a well insulated 3 bedroom house keeps the upstairs at 64F and downstairs at 61F and basement at 68F) also good
sleeping temps and I'm rarely home for heat to be more then that....anyway with the all year budget gas savings and the 115 bucks about a month on electric savings ..that is a total of
$1115 bucks per year in savings. Some of that also to be noted is savings above and beyond the 'titan asic miners' in this decrease in price from 13.7c kwh to 9.27c kwh applies to ALL my electric use too boot....

So yeah...with the BTC halving coming up in August 2016 a person using the above 'just may' be able to mine at least bought 'used' equipment as a home miner in winter of 2016-2017 yet it seems...or as you state places like USA states with hydroelectric and Texas etc.....

anyway hopefully it is not just me and with a phone call (esp Midwest Xcel customers...again call after hours and a regular xcel tech ...you don't want this passed around during the day to be mulled over..the regular customer rep after hours has the power to 'tag' such as was my case..just saying)

worth a call ..again esp Xcel electric customers...worse that can happen is 1) they laugh and go no....same rates.....2) they inspect your server equip ..laugh say nice try same old rates

hopefully it is 3) it is tag'd by rep ....and someone looks at your electric use in winter ..goes yep looks like winter electric heat is primary..and rubber stamps it ..like in my case

again below is the thread on how this was done on bitcointalk for those too lazy to scroll back

https://bt.irlbtc.com/view/1296558.msg13304401#msg13304401

again good luck...the down side on this is on APRIL 2016 when the rate reverts I am gonna 'cry me a river' it is gonna hurt to go from 9.27c kwh to 13.7c kwh in one swoop for an extra 115 bucks  a month to xcel..my only 'hope' is that BTC and LTC prices have gone up significant for it to take some of the pain away..

if nothing else I saved the above cash from electric anyway (off of titans) of $575 this winter anywary....when our "outer space alien overlord masters' take the Earth over and make this all moot and btc is 'beanie babies" heh well at least you saved that!

OK as a project to test WITHOUT A CUBE...assuming one can get a clone titan bridge (i have one on order) and supposedly a JUPITER OCT controller with 4 ports also works ..I also have that...and a spare LCD screen from Titan controller (have 6 on a controller 2 on other titans controller) and of course put the Firmware for Titan on SD card and I have a 'supposed' correct Raspberry PI B+ 512mb as well

So ...assuming my bravery factor can be 'pushed' up somewhat on this ...(donations? naw people don't go donations for stupid) anyway

I take 4 port oct knc Jupiter board....put clone bridge on it.....put raspberry pi on that....add the tarky titan firmware on the SD ...pop the LCD in (not sure what port does it matter) and then just simply SEE if the LCD at least shows Tarky Titan and looks like its looking for a cube...and ie be able to IP into it via putty and GUI and  showing NO cubes

would that be a good first step before the 'virgin sacrifice' of a even 1 die working Titan cube or some such on this project?

or again ..did i 'miss the memo' and this is not possible on anything say but a Neptune card or nov only knc Jupiter card and not my oct Jupiter 4 port card..and/or the
actual fpga on the titan orig card is different and not loaded

not sure of my bravery factor on the above but just asking if such a scenario would tell the tale? Again with the 'cloned titan bridge' coming...have all the parts staring at me above

Okay sold 3, only 4 KnC bridges left. Again, pricing is firm at 0.5 BTC per bridge PCB. If someone wants a bigger amount than 5 bridges just PM me, there's two other guys that want more than 5, we can pool all the resources and just get a bulk order for the amount you want.

Here's what they look like fresh off the line.

They fit between your Titans Raspberry PI and the controller board. It has some reinforced copper to prevent burning out (which a lot of bridges did do). You can get them if you have burnt or broken bridges, or if you want some just in-case your controller's bridges fail than it's nice too.

Hey, I can take a hint. :|

lol I'm all for the idea, I have an extra pi and am willing to use a bridge up on a neptune for trials if someone is willing to send me their working neptune controller board (even though it most likely won't work, but we can't confirm either way until we try it).

Haha, well i've got plenty of titan LCDs, don't really need them anyway.

But yeah if anyone's willing to send a neptune/sha256 knc board my way I can risk my pi and bridge to see if the controller is basic or complex. In the case of it being complex i'll just clone it as a last resort.

Quick question for anyone listening: Can you touch with your finger the FPGA chip on a running Neptune/Titan controller board and tell me if it's cold or warm? If warm, how warm?

Thanks and happy holidays!