Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.105)

Author

Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s) (Read 206446 times)

glph3k (OP)

Member

Offline

Activity: 91
Merit: 29

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 07:21:35 AM

#2081

Quote from: Kicigz on April 15, 2018, 01:34:47 AM

Cryptonight heavy have problem. I am on 6x rigs with rx 470 on every rig gpu 1 have low hash rate ~100 h/s. cryptonight v7 is ok

Hi,

do the cards have 4 or 8 GB? Which driver version? Would recommend 18.3.4. What do you mean exactly with 100 h/s? 100 h/s lower or really just 100 h/s?

Regards,
Glph3k

glph3k (OP)

Member

Offline

Activity: 91
Merit: 29

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 07:23:40 AM

#2082

Quote from: Poseidon_ on April 15, 2018, 01:24:57 AM

Hi, didint work here, I have 4 vega 56 and takes 300h/s each vga with --algo=2 and without that there's lots of errors
I'm using win 10 and blockchain driver 17.30.1029

Hi,

sorry, Heavy was only tested with 18.3.4 drivers. Will check the situation is with the blockchain drivers.

Regards,
Glph3k

professorkuusamo

Newbie

Offline

Activity: 14
Merit: 0

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 07:37:35 AM

#2083

glph3k,when you add aditional list pools?

abudfv2008

Full Member

Offline

Activity: 728
Merit: 106

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 10:59:04 AM

#2084

Quote from: glph3k on April 15, 2018, 07:21:35 AM

Quote from: Kicigz on April 15, 2018, 01:34:47 AM

Cryptonight heavy have problem. I am on 6x rigs with rx 470 on every rig gpu 1 have low hash rate ~100 h/s. cryptonight v7 is ok

Hi,

do the cards have 4 or 8 GB? Which driver version? Would recommend 18.3.4. What do you mean exactly with 100 h/s? 100 h/s lower or really just 100 h/s?

Regards,
Glph3k

Have the same issue with blockchain drivers. Hasrate starts at ~200h/s and then drops to 100 ... 60.

djkice

Member

Offline

Activity: 99
Merit: 10

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 12:58:30 PM

#2085

anyone got cryptonight-h working with blockchain drivers?

slapenke

Newbie

Offline

Activity: 1
Merit: 0

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 01:01:57 PM

#2086

Glph3k is looking into fixing the issues with the blockchain drivers at this right moment

and just to clarify, no, heavy will not work on blockchain drivers (at least with vegas).

dragonmike

Hero Member

Offline

Activity: 1274
Merit: 556

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 01:44:17 PM

#2087

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

Bhaal1

Newbie

Offline

Activity: 80
Merit: 0

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 01:51:50 PM

#2088

Quote from: dragonmike on April 15, 2018, 01:44:17 PM

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

Yes. Switched a few hours ago and everything is fine. I ended up with the same hashrates (vegas 56).

almost30

Newbie

Offline

Activity: 164
Merit: 0

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 01:59:02 PM

#2089

Nicehash supporting cryptonight v7 algo .
what about nano pool guys ? any recommendation of pool ! Huh

Kicigz

Newbie

Offline

Activity: 3
Merit: 0

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 02:20:27 PM

#2090

Quote from: glph3k on April 15, 2018, 07:21:35 AM

Quote from: Kicigz on April 15, 2018, 01:34:47 AM

Cryptonight heavy have problem. I am on 6x rigs with rx 470 on every rig gpu 1 have low hash rate ~100 h/s. cryptonight v7 is ok

Hi,

do the cards have 4 or 8 GB? Which driver version? Would recommend 18.3.4. What do you mean exactly with 100 h/s? 100 h/s lower or really just 100 h/s?

Regards,
Glph3k

My card have 4 GB(6 rigs with 6xrx470 and 3 rigs with 8rx580) Blockchain driver from august.On every rig is the same problem with only one-primary card. Hashrate of that card is around 100H/R 60-150 H/R but just primary gpu and thats happend only with Cryptonight heavy. Normaly I just reset miner and clock is ok but with Criptonight heavy allways is the same clock around 100h/s.

glph3k (OP)

Member

Offline

Activity: 91
Merit: 29

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 02:30:26 PM

#2091

Hi,

to all who experience low hashrates with CryptoNight-Heavy. If you are using the Blockchain Aug23 beta drivers. it is a known problem.

A fix will be released in the next version.

Regards,
Glph3k

djkice

Member

Offline

Activity: 99
Merit: 10

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 03:18:31 PM

#2092

Quote from: dragonmike on April 15, 2018, 01:44:17 PM

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

simple if stock but for me i use v64 bios and undervolt.

I kinda have a fear of getting the powerplaytables etc applied after updating the drivers. It was extremely painful gettign right for the block chain drviers. should anything not work then it's gonna be a time investment to resolve.

dragonmike

Hero Member

Offline

Activity: 1274
Merit: 556

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 03:36:42 PM

#2093

Quote from: djkice on April 15, 2018, 03:18:31 PM

Quote from: dragonmike on April 15, 2018, 01:44:17 PM

Tbh there is no reason to be using blockchain driver for anything anymore. The latest Adrenalin drivers work with everything perfectly.

Oh trust me I understand. I've been there.
But I've done the switch and it's working. Also you're able to easier mine anything else now, i.e. not stuck to Cryptonight. I've been mining ETH with Claymore etc.

Basically the latest Adrenalin driver is a "fully functional" version of the blockchain driver! Cheesy

cristian13

Newbie

Offline

Activity: 18
Merit: 1

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 05:22:07 PM

#2094

Hi,
Someone can help with a tip ? I am runing a 6 x Vega64 plus 2 x RX580 8gb rig for about 5 months with blockchain drivers. Now i am trying to mine cryptonight-heavy with latest adrenalin drivers but the issue is that my powerplay tables that i was using on blockchain drivers, dont work now, 3 of my vegas give signature drivers issue (exclamation mark). Can someone share good powerplay tables that were tested with latest adrenalin drivers ?
Thank you

P00P135

Full Member

Offline

Activity: 1126
Merit: 136

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 05:44:39 PM

#2095

Quote from: cristian13 on April 15, 2018, 05:22:07 PM

DDU drivers, install new drivers, apply power play tables, use Ntool.

cristian13

Newbie

Offline

Activity: 18
Merit: 1

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 07:31:23 PM

#2096

Yeah, i know the steps, but i am looking for other power play tables because the ones that i used on blockchain drivers, dont work with the latest, i get driver signature issue.

Poseidon_

Newbie

Offline

Activity: 6
Merit: 0

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 07:42:06 PM
Last edit: April 15, 2018, 08:03:42 PM by Poseidon_

#2097

I put the driver adrenalin 18,3,4 and get it lower hash
With blockchain driver a get 862h with rx580 and now 490h
Vega still not working Sad

With the Vegas after a while disconnecting from pool and reconnect again and again

It's impossible get 1900h/s with criptonight heavy?

Edit:
I'm using xmrig and it gets 1300/1400h/s each Vega 56 without problem and 700h/s with 580!
Sumokoin!!!

RAJNIFICENT

Newbie

Offline

Activity: 16
Merit: 0

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 08:14:39 PM

#2098

Just want to bring this up to your attention:

--Ratewatchdog seems to sometimes cause the Hashrate one one card in a 4 Card Vega 56 rig to drop to 561- 100 hs where it normally will be abount 1.85KHs

I hope there is a way to improve upon this command or if you have tips and tricks to perhaps make this work better, please do share.

CryptoPlay

Jr. Member

Offline

Activity: 202
Merit: 2

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 09:04:59 PM

#2099

Quote from: CryptoPlay on April 14, 2018, 12:59:07 AM

Quote from: cubbo on April 13, 2018, 02:25:40 PM

Quote from: CryptoPlay on April 13, 2018, 02:45:15 AM

After executing the BAT, the miner open and closes before i see anything.

Ive added just the --help to the bat and nothing more. Ive found the instructions example not sufficient .

Can someone help me and share a Vega 64 x 6 config please.

Hi Cryptoplay,

You need to open a command prompt and then run the .bat file to see what it is doing. Navigate to the location of your cast_xmr.exe file and make sure your .bat file is in the same folder.

Open a command prompt and then navigate to that folder, type the name of your bat file and look at the error message that the file generates. It is most likely to do with the numbering scheme of your graphics cards.

I will try making a little video later on to show you what i mean.

Hello,

https://imgur.com/TvsWihj

Somethng related to "Entry point not found" , not located in openCL.dll.

Thanks for the help

Can someone help? The bat is not that big...
cast_xmr-vega --opencl 1 --help

Also tried 0, =1, 2 with same result.

https://signature.statseb.fr/sig-2065.png

rbrcpa

Copper Member
Jr. Member

Offline

Activity: 62
Merit: 1

Re: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)

April 15, 2018, 10:07:03 PM

#2100

Quote from: cristian13 on April 15, 2018, 07:31:23 PM

Yeah, i know the steps, but i am looking for other power play tables because the ones that i used on blockchain drivers, dont work with the latest, i get driver signature issue.

Try using the 85% ones from Phase 2 of the FAQ section of the following guides.

http://vega.miningguides.com/p/faq.html#TDRFailure

I'm on the latest driver version and they work just fine.

Pages: « 1 ... 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 [105] 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 »

Page 104

Viewing Page: 105