<<  >> (p.91)
    Author Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)  (Read 206447 times)

    • bytiges
    Full Member
    ***
    Offline Offline

    Activity: 196
    Merit: 100


    View Profile
    March 13, 2018, 06:25:03 AM
     #1801
    Quote from: visten on March 11, 2018, 08:01:42 PM
    Aren't here some pros who actually know about that stuff?

    'I noticed that the majority of all my and other questions from people are just ignored and no one replies to those at all....

    Are there actually forums where I would actually get an answer to those questions and others?! Hardly anyone ever helped me on this forum...

    I don't mean to be harsh on you, but want to give you an insight.

    The stuff you're asking about is very basic. It's been discussed extensively on the forums and the "pros" are tired of answering newbies that don't want to do their homework properly.

    So, unless you can contribute something interesting or new, there's little chance that a "pro" will babysit you and hold your hand in. You need to put some effort into whatever you're doing.

    HTH

  • bytiges
    Full Member
    ***
    Offline Offline

    Activity: 196
    Merit: 100


    View Profile
    March 13, 2018, 09:29:31 AM
     #1802
    On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

    My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm  on the same rig and same weather conditions.

    Anyone noticed the same ?

  • glph3k (OP)
    Member
    **
    Offline Offline

    Activity: 91
    Merit: 29


    View Profile WWW
    March 13, 2018, 07:48:31 PM
     #1803
    Quote from: bytiges on March 13, 2018, 09:29:31 AM
    On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

    My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm  on the same rig and same weather conditions.

    Anyone noticed the same ?

    The kernel for 'classic CryptoNight' did not change and is technical the same as in version 0.8.5  so a change in power consumption would be strange.
     
    The CryptoNightV7 kernel is a little more complex but the additional instructions are still masked by the memory accesses and do have no real performance influence.

    So if still running with classic CryptoNight the power consumption an therefore fan speed should be the same. For CryptoNight V7 a tiny increase would be explainable.

    Regards,
    glph3k

  • commonorx
    Newbie
    *
    Offline Offline

    Activity: 99
    Merit: 0


    View Profile
    March 14, 2018, 08:14:38 PM
     #1804
    Quote from: glph3k on March 13, 2018, 07:48:31 PM
    Quote from: bytiges on March 13, 2018, 09:29:31 AM
    On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

    My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm  on the same rig and same weather conditions.

    Anyone noticed the same ?

    The kernel for 'classic CryptoNight' did not change and is technical the same as in version 0.8.5  so a change in power consumption would be strange.
     
    The CryptoNightV7 kernel is a little more complex but the additional instructions are still masked by the memory accesses and do have no real performance influence.

    So if still running with classic CryptoNight the power consumption an therefore fan speed should be the same. For CryptoNight V7 a tiny increase would be explainable.

    Regards,
    glph3k

    Any thoughts on NeoScrypt version for CAST? CAST NEOSCRYPT??

  • duyquang06
    Newbie
    *
    Offline Offline

    Activity: 154
    Merit: 0


    View Profile
    March 15, 2018, 03:00:30 AM
     #1805
    Quote from: bytiges on March 13, 2018, 09:29:31 AM
    On latest version, 0.9.0 I noticed an increase of the heat generated by the cards.

    My fans were around 3400-3700rpm, while now they're more like 3700-4100rpm  on the same rig and same weather conditions.

    Anyone noticed the same ?

    Me switched from 0.8 to 0.9, have watt-a-kill, same power consume : D

    tested on vega 56, 64.

  • micky123
    Legendary
    *
    Offline Offline

    Activity: 1044
    Merit: 1005



    View Profile
    March 15, 2018, 01:43:05 PM
     #1806
    On a different note, does anyone know if there were blockchain drivers released for Sapphire Nitro Radeon RX480 after the August 2017 release? I can't seem to find any drivers post August 2017 and the August 2017 ones do not work, i used the DDU program and uninstalled the drivers, reinstalled the blockchain drivers, then added the patch too.... every time i do this process, the screen goes off and does not let me into normal mode, then i have to reboot into safe mode again, uninstall the drivers and come back out again! I am running windows 7, any idea what could be causing this?

  • P00P135
    Full Member
    ***
    Offline Offline

    Activity: 1126
    Merit: 136


    View Profile
    March 15, 2018, 03:35:44 PM
     #1807
    Quote from: micky123 on March 15, 2018, 01:43:05 PM
    I am running windows 7

    Update windows 10 and use windows 10 blockchain drivers, or you could try the hacked robinhood drivers i think they were win 7 compatible.

  • micky123
    Legendary
    *
    Offline Offline

    Activity: 1044
    Merit: 1005



    View Profile
    March 15, 2018, 04:09:33 PM
     #1808
    Quote from: P00P135 on March 15, 2018, 03:35:44 PM
    Quote from: micky123 on March 15, 2018, 01:43:05 PM
    I am running windows 7

    Update windows 10 and use windows 10 blockchain drivers, or you could try the hacked robinhood drivers i think they were win 7 compatible.

    Whoa, so there is no native support for Windows 7? I thought they would support windows 7 and windows 10. Let me look around for the robinhood drivers and see if they suit my requirement. Not sure if i wanna go down the route of reinstalling the OS to get some hash rate increase. Thanks for the lead! Smiley

  • RandallPeltzer
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    March 19, 2018, 05:50:56 PM
     #1809
    I got an issue where the miner freezes and stays there until window is closed ...
    what is funny is that the watt pulled from the wall does only decrese by around 20% of the max power ...

    So a rig pulls around 1600 W ... 7 vega56 then freezes in a state where no more shares are hashed but pulls around 1300 W
    still with out submitting any shares ...

    Name=v1
    GPU_P0=852;800
    GPU_P1=991;900
    GPU_P2=1138;950
    GPU_P3=1269;1000
    GPU_P4=1312;1050
    GPU_P5=1474;1100
    GPU_P6=1382;1100
    GPU_P7=1432;1100
    Mem_P0=167;800
    Mem_P1=500;800
    Mem_P2=700;900
    Mem_P3=945;950
    Fan_Min=2400
    Fan_Max=4900
    Fan_Target=70
    Fan_Acoustic=2400
    Power_Temp=80
    Power_Target=-7

    Any help or suggestions?

  • chup
    Sr. Member
    ****
    Offline Offline

    Activity: 737
    Merit: 262


    Me, Myself & I


    View Profile
    March 20, 2018, 07:49:05 AM
     #1810
    Quote from: RandallPeltzer on March 19, 2018, 05:50:56 PM
    I got an issue where the miner freezes and stays there until window is closed ...
    what is funny is that the watt pulled from the wall does only decrese by around 20% of the max power ...

    So a rig pulls around 1600 W ... 7 vega56 then freezes in a state where no more shares are hashed but pulls around 1300 W
    still with out submitting any shares ...

    Name=v1
    GPU_P0=852;800
    GPU_P1=991;900
    GPU_P2=1138;950
    GPU_P3=1269;1000
    GPU_P4=1312;1050
    GPU_P5=1474;1100
    GPU_P6=1382;1100
    GPU_P7=1432;1100
    Mem_P0=167;800
    Mem_P1=500;800
    Mem_P2=700;900
    Mem_P3=945;950
    Fan_Min=2400
    Fan_Max=4900
    Fan_Target=70
    Fan_Acoustic=2400
    Power_Temp=80
    Power_Target=-7

    Any help or suggestions?

    My suggestion is to start downvolting first. I run my Vegas with 900/800 mV GPU/MEM (top clock values I use 1407/940) with target temp of 52 degrees. Some cards will do freezing as You described, so upping for 25mV GPU voltage and lowering MEM clock for steps of 5 will bring You to rock stable mining. And delete that -7 power target.
    MEGABONUS 🔥  up to 8.25% 🔥  CASHBACK at ALIEXPRESS, 🔥 $10.45  🔥  at AIRBNB...

  • yondy12
    Newbie
    *
    Offline Offline

    Activity: 14
    Merit: 0


    View Profile
    March 20, 2018, 08:23:50 AM
     #1811
    anyone know why I got  notify "socket error" when m mining at etn.spacepool , etn.fairhash?Huh

  • R0mi
    Full Member
    ***
    Offline Offline

    Activity: 305
    Merit: 148

    Theranos Coin - IoT + micro-blood arrays = Moon!


    View Profile
    March 20, 2018, 10:34:52 PM
     #1812
    Quote from: micky123 on March 15, 2018, 01:43:05 PM
    On a different note, does anyone know if there were blockchain drivers released for Sapphire Nitro Radeon RX480 after the August 2017 release? I can't seem to find any drivers post August 2017 and the August 2017 ones do not work, i used the DDU program and uninstalled the drivers, reinstalled the blockchain drivers, then added the patch too.... every time i do this process, the screen goes off and does not let me into normal mode, then i have to reboot into safe mode again, uninstall the drivers and come back out again! I am running windows 7, any idea what could be causing this?

    Can't speak to Win7, but under Win 10, the latest Adrenaline drivers give excellent results for RX 480/570/580.  General process is find and apply whatever memory strap improvement that matches the memory on your card, install latest AMD driver, immediately run amdpatcher.exe before restarting.  That avoids the Window crashing on startup issues with latest Adrenaline drivers.  *** Make sure you also enable "compute" mode in AMD Settings.
    Walton Chain CEO Mo' Bling: "Walton Chain will be the Qualcomm + Cisco in the blockchain industry, the ‘Google’ of the Blockchain."  It's December 1999, do you know how your shitcoin holdings are doing?  Magic 8 ball market analysis: www.doiownashitcoin.com

  • rbrcpa
    Copper Member
    Jr. Member
    *
    Offline Offline

    Activity: 62
    Merit: 1


    View Profile
    March 21, 2018, 04:17:12 PM
     #1813
    Anybody having mass rejection issues using the latest version of Cast XMR with Nicehash?

    It seems be to isolated to the cryptonight v7 shares that it finds but apparently at some point today the number of those shares its finding has increased a ton.

    I’m using Cast XMR within Awesome Miner and for some reason when I use the -algo switch it just kills the miner. Not sure what I’m doing wrong but I wound up having to revert back to the oldest version.

    I was using -algo 0 just like I use the -G switch for all of my GPU.

  • CryptoSouth
    Newbie
    *
    Offline Offline

    Activity: 63
    Merit: 0


    View Profile
    March 22, 2018, 02:33:27 AM
     #1814
    Is there any update on the development of this miner on Linux?

  • tf2addict
    Full Member
    ***
    Offline Offline

    Activity: 675
    Merit: 100


    View Profile
    March 22, 2018, 07:02:33 AM
     #1815
    Suddenly I can't mine Graft with my Vegas using Cast 0.9.0, it says rejected share - low difficulty.  Tried two different pools.  Is something broken?

  • glph3k (OP)
    Member
    **
    Offline Offline

    Activity: 91
    Merit: 29


    View Profile WWW
    March 22, 2018, 01:04:43 PM
     #1816
    Quote from: tf2addict on March 22, 2018, 07:02:33 AM
    Suddenly I can't mine Graft with my Vegas using Cast 0.9.0, it says rejected share - low difficulty.  Tried two different pools.  Is something broken?

    Use the option --algo=0 to force classic CryptoNight.

    Graft reports that it is Version 7, the flag which Monero uses for the upcomming switch to their new CryptoNight variant.

  • tf2addict
    Full Member
    ***
    Offline Offline

    Activity: 675
    Merit: 100


    View Profile
    March 22, 2018, 02:43:28 PM
     #1817
    Quote from: glph3k on March 22, 2018, 01:04:43 PM
    Quote from: tf2addict on March 22, 2018, 07:02:33 AM
    Suddenly I can't mine Graft with my Vegas using Cast 0.9.0, it says rejected share - low difficulty.  Tried two different pools.  Is something broken?

    Use the option --algo=0 to force classic CryptoNight.

    Graft reports that it is Version 7, the flag which Monero uses for the upcomming switch to their new CryptoNight variant.

    Thanks, working ok now.

  • zeef
    Newbie
    *
    Offline Offline

    Activity: 304
    Merit: 0


    View Profile
    March 22, 2018, 03:34:21 PM
     #1818
    Hi,

    Cast XMR UI doesnt work properly mining GRAFT in 0_9_1 version, because ignore the --algo=0  Cheesy

    Exist any thread for the Cast XMR UI?

    Regards

  • zeef
    Newbie
    *
    Offline Offline

    Activity: 304
    Merit: 0


    View Profile
    March 22, 2018, 03:49:43 PM
     #1819
    Quote from: glph3k on March 22, 2018, 01:04:43 PM
    Quote from: tf2addict on March 22, 2018, 07:02:33 AM
    Suddenly I can't mine Graft with my Vegas using Cast 0.9.0, it says rejected share - low difficulty.  Tried two different pools.  Is something broken?

    Use the option --algo=0 to force classic CryptoNight.

    Graft reports that it is Version 7, the flag which Monero uses for the upcomming switch to their new CryptoNight variant.

    Thanks glph3k,

    How exactly --ratewatchdog works glph3k?

    Regards

  • glph3k (OP)
    Member
    **
    Offline Offline

    Activity: 91
    Merit: 29


    View Profile WWW
    March 22, 2018, 04:01:54 PM
     #1820
    Quote from: zeef on March 22, 2018, 03:49:43 PM

    How exactly --ratewatchdog works glph3k?


    It just compares the current hash rate with the average hash rate if it is below a certain threshold it resets the kernel for the affected GPU.

    It should be faster then a complete restart and if only some GPUs have an hash rate drop only those have to be reseted and it does not lose the current job state.

    The exact reason for a sudden hash rate drop is still to be found, but it seems to be rooted deep in the driver. I suspect that it has to do something with power level switichings (ACPI) or similar.

    Regards,
    glph3k
    Pages: « 1 ... 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 [91] 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 ... 154 »
      Print  
Page 90
Viewing Page: 91

IRLBTC™ © 2025 IRLBTC.com