<<  >> (p.95)
    Author Topic: [Cast XMR] high speed XMR/CryptoNight miner for RX Vega GPUs (2 KHash/s)  (Read 206446 times)

    • polofitted007
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    March 30, 2018, 04:45:43 PM
     #1881
    That worked, getting 3300 H/S out of 2 56's, does that sound right? 

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

  • N2DCRYPT
    Jr. Member
    *
    Offline Offline

    Activity: 148
    Merit: 5


    View Profile
    March 30, 2018, 04:57:47 PM
     #1882
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right? 

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley

  • polofitted007
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    March 30, 2018, 05:06:58 PM
     #1883
    Quote from: N2DCRYPT on March 30, 2018, 04:57:47 PM
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right? 

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley

    Once again, thanks(Beleive it or not, I have had the vegas up and running until a month ago for 6 months, hands off.  Used the script provided in that vegamining guide)...

    Im just being silly.  I will install overdrive and update the soft play tables.  I don't know why i though the new miner did all of that with just the updated driers.  Ill report back once i overclock and change the registry...

  • polofitted007
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    March 30, 2018, 05:29:16 PM
     #1884
    Ok, Overdrive in working, and softplay applied, now getting 1900 H/S..... YAAAAAYYYYYY

  • SpainPoul
    Newbie
    *
    Offline Offline

    Activity: 5
    Merit: 0


    View Profile
    March 30, 2018, 05:39:33 PM
     #1885
    What is the best pool?

  • polofitted007
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    March 30, 2018, 05:57:15 PM
     #1886
    Quote from: SpainPoul on March 30, 2018, 05:39:33 PM
    What is the best pool?

    I'm using mine2gether to mine TRTL

  • RAJNIFICENT
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    March 30, 2018, 06:04:36 PM
     #1887
    Quote from: N2DCRYPT on March 30, 2018, 10:54:30 AM
    First off, thanks so much glph3k! I've been using your miner since the beginning, it's come a long way since then!

    Like many vega owners/miners, I've been waiting for the day when using the August BC drivers is no longer necessary. Seems that day is here!

    I'm getting full speeds on all 56/64 cards with your updated miner and the new 18.3.4 Adrenalin drivers. No more disable/enable needed!

    I'm also hoping to get my Vega FEs switched over soon as well, but Overdriven Tool does not support Vega FE yet on the new drivers.

    I will say that I did notice the same issue that RAJNIFICENT mentioned on several of my rigs. I've reduced some clocks and added some voltage, fingers crossed that that solves it.

    Also wanted to say I'm liking your --ratewatchdog argument. From what I've seen, it picks up the slight drops in hashrate pretty well. Vega mining is getting close to plug and play! Smiley


    Hi, please share your success failures.  I'm trying to reduce my overclock, however my hashrates on one rig continues to drop.  If I can get rate watch to work as designed, dude my life would be complete.

  • AlexanderDumas
    Newbie
    *
    Offline Offline

    Activity: 206
    Merit: 0


    View Profile
    March 30, 2018, 06:44:29 PM
     #1888
    Quote from: N2DCRYPT on March 30, 2018, 04:57:47 PM
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right? 

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley
    I think he will care about power consumption, because between using the "power tables" and not, there is about 90W per card difference. Grin

    160W VS 250W.

  • polofitted007
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    March 30, 2018, 07:35:04 PM
     #1889
    Quote from: AlexanderDumas on March 30, 2018, 06:44:29 PM
    Quote from: N2DCRYPT on March 30, 2018, 04:57:47 PM
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right? 

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley
    I think he will care about power consumption, because between using the "power tables" and not, there is about 90W per card difference. Grin

    160W VS 250W.


    My power rarte is .052 so I don't mine the xtra power...

  • AlexanderDumas
    Newbie
    *
    Offline Offline

    Activity: 206
    Merit: 0


    View Profile
    March 30, 2018, 07:50:42 PM
     #1890
    Quote from: polofitted007 on March 30, 2018, 07:35:04 PM
    Quote from: AlexanderDumas on March 30, 2018, 06:44:29 PM
    Quote from: N2DCRYPT on March 30, 2018, 04:57:47 PM
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right? 

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley
    I think he will care about power consumption, because between using the "power tables" and not, there is about 90W per card difference. Grin

    160W VS 250W.


    My power rarte is .052 so I don't mine the xtra power...
    well.... The extra watts are extra heat on your hardware and more wear and tear on GPU and PSU, and even if you do not mind the extra power, why wasting it?

  • heavyarms1912
    Full Member
    ***
    Offline Offline

    Activity: 729
    Merit: 114



    View Profile
    March 30, 2018, 07:57:39 PM
     #1891
    Quote from: polofitted007 on March 30, 2018, 07:35:04 PM
    Quote from: AlexanderDumas on March 30, 2018, 06:44:29 PM
    Quote from: N2DCRYPT on March 30, 2018, 04:57:47 PM
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right? 

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley
    I think he will care about power consumption, because between using the "power tables" and not, there is about 90W per card difference. Grin

    160W VS 250W.


    My power rarte is .052 so I don't mine the xtra power...

    Do it to save electricity regardless of the price.  it's not even a big task.  and you can reduce the heat dissipated by a lot & reduce the fan noise.

  • polofitted007
    Newbie
    *
    Offline Offline

    Activity: 27
    Merit: 0


    View Profile
    March 30, 2018, 08:10:09 PM
     #1892
    Quote from: heavyarms1912 on March 30, 2018, 07:57:39 PM
    Quote from: polofitted007 on March 30, 2018, 07:35:04 PM
    Quote from: AlexanderDumas on March 30, 2018, 06:44:29 PM
    Quote from: N2DCRYPT on March 30, 2018, 04:57:47 PM
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right?  

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley
    I think he will care about power consumption, because between using the "power tables" and not, there is about 90W per card difference. Grin

    160W VS 250W.


    My power rarte is .052 so I don't mine the xtra power...

    Do it to save electricity regardless of the price.  it's not even a big task.  and you can reduce the heat dissipated by a lot & reduce the fan noise.

    How else will you get 1900 H/S without overclocking?  I bought the GPU to mine, therefore I am going to use it up

  • heavyarms1912
    Full Member
    ***
    Offline Offline

    Activity: 729
    Merit: 114



    View Profile
    March 30, 2018, 10:23:32 PM
     #1893
    Quote from: polofitted007 on March 30, 2018, 08:10:09 PM
    Quote from: heavyarms1912 on March 30, 2018, 07:57:39 PM
    Quote from: polofitted007 on March 30, 2018, 07:35:04 PM
    Quote from: AlexanderDumas on March 30, 2018, 06:44:29 PM
    Quote from: N2DCRYPT on March 30, 2018, 04:57:47 PM
    Quote from: polofitted007 on March 30, 2018, 04:45:43 PM
    That worked, getting 3300 H/S out of 2 56's, does that sound right?  

    Also, do I need to turn off crossfire still?

    Once again, Thanks!

    That's low. And no, don't think you'll have to with the new drivers...

    Sounds like you're new here... Grin which would mean that you haven't gotten all into SoftPowerPlay tables and all that, and registry edits to turn off Crossfire, etc. For in depth, check out vegaminingblogspot. Probably the best and most concise guide (although much of that is no longer needed with the new drivers and CAST). You should overclock your memory, either with Wattman or Overdriven tool.

    If you don't care about power consumption and undervolting, try putting your memclock at 950 MHz for both cards and report back on your hashrate  Smiley
    I think he will care about power consumption, because between using the "power tables" and not, there is about 90W per card difference. Grin

    160W VS 250W.


    My power rarte is .052 so I don't mine the xtra power...

    Do it to save electricity regardless of the price.  it's not even a big task.  and you can reduce the heat dissipated by a lot & reduce the fan noise.

    How else will you get 1900 H/S without overclocking?  I bought the GPU to mine, therefore I am going to use it up

    Almost everyone out there with Vega and mining get 1900 MH/s

    I get 1960 MH/s @ 1408 Mhz core1100 Mhz HBM2 frequency (875mV on core) on Vega56 bios modded to Vega 64 and using soft_pp power table.  The power consumption is 150-160w on wall.
    All info can be found in the below guide
    http://vega.miningguides.com/

  • End3rWiggin
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    March 30, 2018, 11:00:55 PM
     #1894
    It's not working quite right for me Sad

    * Used DUU to uninstall drivers, and installed new Adrenaline drives.
    * Disabled Crossfire and set Profiles to custom and custom voltage to on.
    * Wrote Soft PP tables to registry.
    * Restarted.

    So everything works great at the start - 2000H/s and lower temperatures, same voltages and power consumption.
    But after about 20min it just stops working entirely, if I press q to quit it just hangs, and I have to restart the system.

    Back on blockchain drivers Sad

  • N2DCRYPT
    Jr. Member
    *
    Offline Offline

    Activity: 148
    Merit: 5


    View Profile
    March 31, 2018, 12:09:34 AM
     #1895
    Yeah... so I got a little too excited too soon. Definitely have my overclocks well within previous working ranges, and yet after mining for a while cards will randomly start hashing ~100-200 H/s. Very strange... I can exit the miner without it hanging and having to restart, but still, can't be around to monitor the machines.

    Will probably pull out the old JJHashRateMonitor modified for CAST and see if that can take care of it, since --ratewatchdog can't fix this problem. We're getting close though!

  • AlexanderDumas
    Newbie
    *
    Offline Offline

    Activity: 206
    Merit: 0


    View Profile
    March 31, 2018, 02:49:03 AM
     #1896
    Quote from: End3rWiggin on March 30, 2018, 11:00:55 PM
    It's not working quite right for me Sad

    * Used DUU to uninstall drivers, and installed new Adrenaline drives.
    * Disabled Crossfire and set Profiles to custom and custom voltage to on.
    * Wrote Soft PP tables to registry.
    * Restarted.

    So everything works great at the start - 2000H/s and lower temperatures, same voltages and power consumption.
    But after about 20min it just stops working entirely, if I press q to quit it just hangs, and I have to restart the system.

    Back on blockchain drivers Sad
    Check your mother board Bios setting of the PCIE slots. They should be set to GEN1 or GEN2. Normally the MB are delivered with AUTO settings.
    Normally switching to this settings take care of the "after 20 minutes" stops.
    I had them as well.

  • Combat Fighter
    Newbie
    *
    Offline Offline

    Activity: 18
    Merit: 0


    View Profile
    March 31, 2018, 09:11:30 AM
     #1897
    What's the max amount of Vega's you can run with one instance of Cast-XMR now?

  • garantie
    Newbie
    *
    Offline Offline

    Activity: 28
    Merit: 0


    View Profile
    March 31, 2018, 09:26:13 AM
     #1898
    Thanks for your efforts and information!

    Will Cast-xmr (Vega) also support Sumokoins "cryptonight heavy" fork?

    BR gar

  • xpulse
    Newbie
    *
    Offline Offline

    Activity: 141
    Merit: 0


    View Profile
    March 31, 2018, 11:59:30 AM
     #1899
    Quote from: RAJNIFICENT on March 30, 2018, 06:04:36 PM
    Quote from: N2DCRYPT on March 30, 2018, 10:54:30 AM
    First off, thanks so much glph3k! I've been using your miner since the beginning, it's come a long way since then!

    Like many vega owners/miners, I've been waiting for the day when using the August BC drivers is no longer necessary. Seems that day is here!

    I'm getting full speeds on all 56/64 cards with your updated miner and the new 18.3.4 Adrenalin drivers. No more disable/enable needed!

    I'm also hoping to get my Vega FEs switched over soon as well, but Overdriven Tool does not support Vega FE yet on the new drivers.

    I will say that I did notice the same issue that RAJNIFICENT mentioned on several of my rigs. I've reduced some clocks and added some voltage, fingers crossed that that solves it.

    Also wanted to say I'm liking your --ratewatchdog argument. From what I've seen, it picks up the slight drops in hashrate pretty well. Vega mining is getting close to plug and play! Smiley


    Hi, please share your success failures.  I'm trying to reduce my overclock, however my hashrates on one rig continues to drop.  If I can get rate watch to work as designed, dude my life would be complete.

    Hi,

    Looks like I have same issue on 1st day mining.

    1 - Vega FE
    4 - Vega 64

    Hicehash
    567 - Accepted (75%)
    187 - Rejected by pool (25%)

    I have never rejected by pool until this version. Same OC as on previous versions.

  • End3rWiggin
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    March 31, 2018, 12:18:36 PM
     #1900
    Quote from: AlexanderDumas on March 31, 2018, 02:49:03 AM
    Quote from: End3rWiggin on March 30, 2018, 11:00:55 PM
    It's not working quite right for me Sad

    * Used DUU to uninstall drivers, and installed new Adrenaline drives.
    * Disabled Crossfire and set Profiles to custom and custom voltage to on.
    * Wrote Soft PP tables to registry.
    * Restarted.

    So everything works great at the start - 2000H/s and lower temperatures, same voltages and power consumption.
    But after about 20min it just stops working entirely, if I press q to quit it just hangs, and I have to restart the system.

    Back on blockchain drivers Sad
    Check your mother board Bios setting of the PCIE slots. They should be set to GEN1 or GEN2. Normally the MB are delivered with AUTO settings.
    Normally switching to this settings take care of the "after 20 minutes" stops.
    I had them as well.


    Great thanks trying this now, will report back if it work! Thanks for the help Smiley
    Pages: « 1 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 [95] 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 ... 154 »
      Print  
Page 94
Viewing Page: 95

IRLBTC™ © 2025 IRLBTC.com