Who care about Gb lost on a rig ??
Mine is 60Gb and 5 Vega are running well.

Which driver are you actually running?
Which miner were you using before?

17.30.1029 BlockChain Drivers from Aug 23

The miner was a version of sgminer

No I haven't tried that yet as they have been the only driver on this build and they were just functioning until early this AM when NH went down. But I've seen stranger things work.

You don´t need to be close to the cards, because within the miner you can see the fans rpms.

Visit vegamining blog authored by @Circusdad.  This issue is discussed and a script for XMR-STAK to monitor hash rate and restart is provided; a few posts back in this thread, user StellarX88 explained how to modify that script to work with Cast.  Meaning, once you customize the script as laid out, and based on the number of cards that you have, the script will restart Cast if your hash rates drops below the hash limit that you define.  Not foolproof, but it has been working fairly well.

If your hash rate is dropping every few minutes, then your problem is with bad values for P7 and P3 (OverDriveNTool), or too aggressive settings in XMR-STAK config file.

Ah yes, of course :) me dumb ^^ thanks!

who says that zeros in hashes are not a problem, so this is the problem because the video card does not work, judging by the drop in the load, the temperature and the total hash. There is an assumption that this depends on decrease voltage and core frequency change.

Hey guys, I've been mining to the nicehash pool and obviously because of the recent events I'm unable to do so.  

So, I'm in a big learning phase here.  I've got to use exchanges and new pools since before Nicehash handled all of that for me and simply sent me BTC.

I tried using the supernova pool addresses and sometimes they connect but then I get a "socket error" and it disconnects.  

That pool address was: xmr-eu.suprnova.cc:5222.  They have a couple others I tried as well that all failed.

Can any of you share some of your working pools?

Also, I intend to mine to mymonero.com online wallet.  I assume it's very similar to myetherwallet?  I don't plan on leaving it there long, but then using shapeshift.io to convert it every so often to BTC and then to my Ledger S.

I'm definitely unfamiliar with this process after being on easy street with Nicehash.  Any help or recommendations are appreciated!

not sure what I could be doing different than others with only rx xxx cards but I ordered a couple vegas and was able to set them up 3830 avg and miner works fine but i've tried everything under the sun and on the rx only rig the miner runs about 8 times faster than the other, I have a much lower accepted shares percentage, pretty sure it's not reading the correct fan to gpu and spitting out more zero's than hashes. Never skips fan readout or temp. Getting 6600hs accross 8 cards but sometimes as high as 20 percent job outdated. Restart and 10, Best i've had it is now showing 92 percent accepted. Seriously considering putting 1 vega to 4 rx and see if that make miner slow down and get the 96 percent accepted on both. Open to any suggestions. tried with many different bat file combo

cast_xmr-vega -S xmr-us-east1.nanopool.org:14444 -u 463t2f679b48ec912eb5a2e156fbca.Hash/82@yahoo.com -G 0,1,2,3,4,5,6,7 -I 9