What are you even doing, you should be getting 1900 H/s with Vega 64.

HAhah man read the threadzzzzzzzzz.

Make sure the card is kept as cool as possible, under 70C, shoot for 65C and whatever fan speed works to achieve the needed temps to prevent the card from throttling memory speed. HEAT = BAD

Consider looking up the regedit to reduce power consumption cited many many times previously. Also, there are other tools to check the actual memory temps that are mentioned in the threads here. READ THREADZZZZ = HELPZZZ COMPUTERZZZZ HASHZZZZZ

Make sure you have disabled screen savers and make sure windows is set to never turn the monitor off. Never lock the computer or send it to the lock screen. Just turn off the monitor. SCREENLOCK = BAD

Then you can hash consistently without the long term drops. There are many steps just from here to fine tune the setup for XMR.
POWER HASHZZZ = MONeyEAZZZY

F r crying out loud man!!!

Stop wasting 1's and 0's with posts like these man.

So look up the other tools mentioned in the previous 50 pages of posts that talk about other tools used to check on the actual temps occurring on the memory, which is different from Wattman/Overdriventool. You will need to check that obviously. Also as I mentioned check your windows settings to make sure monitor and HDD or SSD never turn off. Windows settings are just as important.

Finally ! I just find some time to add this awesome miner to my Monitorig tool.
After some weeks without it, my Vega rig is not blind anymore

Here is my personal dashboard
http://www.monitorig.com/#?panel=dashboard&id=1086db9224632d26671ab42df5ee1d92bf0187bbdd

For power consumption reason, I'm limiting the hashrate, in 1800 (sometime drop to 1600 after some minutes, I'll investigate ... but I don't have dummy plug to let the screen on)  range per card (850W at wall for 5 cards)
I'll release and publish the new version of monitorig tomorrow after some testing tonight

Probably just your connection to where ever you are mining. Most i've seen is 5% loss.

any one tried miningrig rentals to direct miner to different pool?
my thinking was you direct your miner to mining rig rental, if pool fails mining rig rental automaticly connects with next pool on the list?
im testing it now

Get em cooler. I believe HBM throttles at 70C.

First of all, thank you for you miner and the good Page with the Description for the Vega.
Actually Im Mining ETN wirh your software.
Now I got some issue, my somebody can help. I use on my rig for now just 2 Rx vega 64.
I got an extremly high rejected quote because of computing error, around 50% over 12h. I run on W10x64 with 12 GB of RAM and Default Clocks for MB and CPU. One GPU is lightly OC like posted.

VRAM ist set to 20Gb.
I used two pools, currently the official ETN pool.
Any idears what to check?

Thy