https://github.com/brichard19/eclambda

Can anyone try my tool on a 2080ti? On a 2080S it gets around 1300MKeys/sec when using 24-bit DP.

I have not yet decided if I want to.

Bro, how to use -g option ?

I was try -g g1136,g1256,g2136,g2256 but not worekd !!!


Help me please, Very needed right now.

Big thank you

-gpu (tells program to look for compatible gpus)  then -g 136,256 (if you have more than one say 2, it would be -g 136,256,136,256) and if you have 2 gpus then -gpuId 0,1 (or whatever your numbers are)

Here's my config for a 4 gpu setup:

your -g has to match your -gpuId option, meaning if you have 1 card, only put in grid size of 1 card ex: -g 150,384 -gpuId 0

make sense?

edit: it looks like you are trying to run 2 gpus so your setup should be:

3 AM? You should rest!

Hello to all! To my questions, while there is no answer, help who can. I tried to compile the file myself, but it does not start, what did I do wrong? To output information to a separate file
Kangaroo.exe -t 0 -d 14 -gpu -gpuId 0 -w 65save.txt -wi 30 65.txt -o 64save.txt
save the kangaroo in a working file also did not start
Kangaroo.exe -t 0 -d 14 -gpu -gpuId 0 -w 65save.txt -wi 30 65.txt -ws:64save.txt

Kangaroo v1.9
Kangaroo [-v] [-t nbThread] [-d dpBit] [gpu] [-check]
         [-gpuId gpuId1[,gpuId2,...]] [-g g1x,g1y[,g2x,g2y,...]]
         inFile
 -v: Print version
 -gpu: Enable gpu calculation
 -gpuId gpuId1,gpuId2,...: List of GPU(s) to use, default is 0
 -g g1x,g1y,g2x,g2y,...: Specify GPU(s) kernel gridsize, default is 2*(MP),2*(Core/MP)
 -d: Specify number of leading zeros for the DP method (default is auto)
 -t nbThread: Secify number of thread
 -w workfile: Specify file to save work into (current processed key only)
 -i workfile: Specify file to load work from (current processed key only)
 -wi workInterval: Periodic interval (in seconds) for saving work
 -ws: Save kangaroos in the work file
 -wsplit: Split work file of server and reset hashtable
 -wm file1 file2 destfile: Merge work file
 -wmdir dir destfile: Merge directory of work files
 -wt timeout: Save work timeout in millisec (default is 3000ms)
 -winfo file1: Work file info file
 -m maxStep: number of operations before give up the search (maxStep*expected operation)
 -s: Start in server mode
 -c server_ip: Start in client mode and connect to server server_ip
 -sp port: Server port, default is 17403
 -nt timeout: Network timeout in millisec (default is 3000ms)
 -o fileName: output result to fileName
 -l: List cuda enabled devices
 -check: Check GPU kernel vs CPU
 inFile: intput configuration file

Please, if possible with examples of use. HELP!!!!
A few days ago I asked for help. After all, it’s not difficult for you. Thank you so much in advance !!!!!!!!
If is says: GPU #0

Then try this command:

Kangaroo.exe -t 0 -d 14 -gpu -ws -w 65save.txt -wi 30 -o 64save.txt 65.txt


If it says: GPU #1

Then:

Kangaroo.exe -t 0 -d 14 -gpu -gpuId 1 -ws -w 65save.txt -wi 30 -o 64save.txt 65.txt


If you collected * bat * as the above program does not start, help correct and fix the ERROR.

Kangaroo -t 0 -d 14 -gpu -gpuId 1 -ws -w 65save.txt -wi 30 -o 64save.txt 65.txt
pause (did as they wrote, after launching the bat file it starts and it says “click any button” in the working window, everything closes after clicking) What should I do to fix the error ??

Is the .bat file in the kangaroo directory? if not, provide the path to kangaroo.exe