Set the virtualmemory to 64000 - I had the same problem with my rig of 580s at it was solved like this.

Could someone give me a more detailled explanation about:
-dcri
Decred/Siacoin/Lbry/Pascal intensity, or Ethereum fine-tuning value in ETH-only ASM mode. Default value is 30, you can adjust this value to get the best Decred/Siacoin/Lbry mining speed without reducing Ethereum mining speed.
   You can also specify values for every card, for example "-dcri 30,100,50".
   You can change the intensity in runtime with "+" and "-" keys and check current statistics with "s" key.
   For example, by default (-dcri 30) 390 card shows 29MH/s for Ethereum and 440MH/s for Decred. Setting -dcri 70 causes 24MH/s for Ethereum and 850MH/s for Decred.
-asm
(AMD cards only) enables assembler GPU kernels. In this mode some tuning is required even in ETH-only mode, use "-dcri" option or or "+/-" keys in runtime to set best speed.
   Currently ETH-LBRY mode is not supported in assembler.
   Specify "-asm 0" to disable this option. You can also specify values for every card, for example "-asm 0,1,0". Default value is "1".
   If ASM mode is enabled, miner must show "GPU #x: algorithm ASM" at startup.
   Check "FINE-TUNING" section below for additional notes.
   NEW: added alternative assembler kernels for Tonga and Polaris cards for ETH-only mode. Use them if you get best speed at "-dcri 1" (i.e. you cannot find speed peak), use "-asm 2" option to enable this mode.

Do I need to set both -asm and -dcri? When I set these, how do they relate to overclocking and undervolting with -cclock, -mclock, -cvddc and -mvddc ?

I upgraded from 9.7 to 10.2 and I get the following.  Any help would be great.
C:\Mining\ClaymoreCryptoNoteGPU-XMR>timeoutt 60

Waiting for 45 seconds, press a key to continue ...
19:26:54.82 Tue 11/07/2017

SUCCESS: Specified value was saved.
SUCCESS: Specified value was saved.
SUCCESS: Specified value was saved.
SUCCESS: Specified value was saved.
SUCCESS: Specified value was saved.
+----------------------------------------------------------------+
¦         Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ¦
+----------------------------------------------------------------+

XMR: 1 pool is specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20580
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 10
GPU #0: Hawaii, 8192 MB available, 44 compute units
GPU #0 recognized as Radeon 390X
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Hawaii, 4096 MB available, 40 compute units
GPU #2 recognized as Radeon 290
GPU #3: Hawaii, 4096 MB available, 44 compute units
GPU #3 recognized as Radeon 290X
GPU #4: Hawaii, 4096 MB available, 44 compute units
GPU #4 recognized as Radeon 290X
GPU #5: Hawaii, 4096 MB available, 40 compute units
GPU #5 recognized as Radeon 290
GPU #6: Hawaii, 4096 MB available, 40 compute units
GPU #6 recognized as Radeon 290
GPU #7: Hawaii, 4096 MB available, 40 compute units
GPU #7 recognized as Radeon 290
GPU #8: Hawaii, 4096 MB available, 44 compute units
GPU #8 recognized as Radeon 290X
GPU #9: Ellesmere, 8192 MB available, 36 compute units
GPU #9 recognized as Radeon RX 480/580
POOL version
GPU #0 algorithm ASM, -h 1376, -dmem 1 (Memory used: 5778MB)
GPU #1 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
GPU #2 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
GPU #3 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
GPU #4 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
GPU #5 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
GPU #6 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
GPU #7 algorithm ASM, -h 1280, -dmem 0 (Memory used: 2688MB)
GPU #8 algorithm ASM, -h 1376, -dmem 0 (Memory used: 2889MB)
GPU #9 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)
Total cards: 10
XMR: Stratum - connecting to 'us-east.cryptonight-hub.miningpoolhub.com' <172.104.76.21> port 20580 (SSL/TLS)
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

SSL/TLS encryption is enabled
XMR: Stratum - Connected (us-east.cryptonight-hub.miningpoolhub.com:20580) (SSL/TLS)
GPU 1, GpuMiner dk2a failed -4
GPU 5, GpuMiner k1a failed -4
GPU 5, GpuMiner k1a failed -4
GPU 0, GpuMiner dk2a failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 1, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner k1a failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 0, GpuMiner dk2an0 failed -4
GPU 5, GpuMiner k1a failed -4
GPU 1, GpuMiner dk2an0 failed -4
GPU 1, GpuMiner dk2an0 failed -4

It then restarts and gets the same results.

Thanks!

+++++++++++++++++++++++++++
Quick Update.....

Moving from a 25GB swap file to 40GB appears to have fixed the issue.
Your page is great!  Thanks for all the info.

v10.2 beta - bug

I also confirm drop of hashrate (~ -100h/s) when monitor goes to sleep or is turned off. Same happens when TeamViewer disconnects. Only solution is to have monitor always on or TeamViewer connected.
VGA: 1x290x (HDMI), 2x280x

In v9.7 everything works normally.

It deos.

To be able for 10.2 to run for a six card miner we need to set the virtual memory @40,000-50,000mb

Hi. Help please, I'm from Venezuela.

I have a rig of 470, 460 cards.

I use the v10.2 and blockchain drivers in win 10. Value -h not defined.

I receive many share rejected. Nicehash pool. Europe, USA, Brazil in all I receive a lot of "share rejected"

Excuse my bad English.

Open Readme!.txt

Let's start with a clean slate.

Make sure the "config.txt" file looks something like this, it does not matter what is in there as long as each line starts with a # symbol.


Delete everything in the "start.bat" file then add this to the start.bat file save and run start.bat - let us know how you get on.