7850 1gb with clay 9,7 make 350-370 h/s  (play with -a & -h parameter)
7850 2gb can reach 400-420 h/s
(def clocks)
don t use 10.2 version

wow thank you for this update !

Hashrate raised from 831 h/s to 890 h/s on my rx580

Good work !

Just test it with my 6 RX 580 Nitro + on ETN

Version 10.2 beta: XMR: GPU0 820 H/s, GPU1 820 H/s, GPU2 820 H/s, GPU3 820 H/s, GPU4 820 H/s, GPU5 819 H/s
with -h 1800 by defaut

Version 11: XMR: GPU0 832 H/s, GPU1 839 H/s, GPU2 839 H/s, GPU3 833 H/s, GPU4 833 H/s, GPU5 839 H/s
with -h 1152 by defaut



Claymore V10.2 H: ~ 4920
Claymore V11 H: ~ 5020

Thanks man !!!!!!!!!!!!!!!!!!!!!!

For tahiti and Pitcairn it seems still 9.7 is fastest

Very good speedup on Polaris!, 20-30h/s per card or even more

Hmm, in my tests v11 is a bit faster for both Tahiti and Pitcairn, or at least the same. May be you use not optimal settings.


Sorry, I don't not support very old cards anymore.

The 11.0 update finally works about the same as v9.7 with my HD 7850. With -h 515 -dmem 0, I get ~ 512 H/s. Fan speeds and temps working with the blockchain drivers. Thank you for the update, I can move off of v9.7 that was giving me problems with the devfee, so I had it set to nofee 1.

For most cases, miner applies the best "-h" and "-dmem" values automatically. But you can find the best value manually:
1. Use "-dmem 0" and try several "-h" values to find the best hashrate. For example, you found that "-dmem 0 -h 512" is the best. It will require about 1GB GPU RAM.
2. Now set "-dmem 1" and divide "-h" value by two: "-dmem 1 -h 256". It will require about 1GB GPU RAM too.
3. Also try "-dmem 1 -h 512" if GPU has enough RAM, it will require about 2GB GPU RAM.
Note that using almost all available GPU memory usually causes slow working because drivers allocate memory incorrectly, reduce "-h" in this case.
In my tests "-dmem 1" must be used for all GPUs for best speed, except Vega which is not optimized properly yet.

r9 290 Ref, bios mod, 965/1250, drivers blockchain 23 aug

v10.2
810h/s(on pool.minexmr.com -12%), -h 880 (max stab val), -dmem 1, gpu temp = 75C

v11.0
790h/s(on pool.minexmr.com, testing...), -h 640 (default val), -dmem 1, gpu temp = 77C

SGMiner 5.5.5
715h/s(on pool.minexmr.com +/- real val), intensity 688, gpu temp = 77C

^^

Thanks, am playing wit them now.  Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?

[/quote]


Just easy  ---->   ADDRESS.7850/mysecret

so you found a worker called 7850 beneath your statistics
mysecret you have to put in to change your payout limit
you dont need a valid email-address

-----------snip-----------
To be able to change your settings you must use the email optional parameter with every miner you have, and it's value must be the same. To find examples how to mine with email using your miner, please check the Help page (EMAIL YOUR_EMAIL is what you should replace with your email). You can use a real email to receive offline workers notifications from the pool or just a secret word to access the settings.
---------snap------------

So I'm getting 'incorrect address'.
I have two workers, but one I'm using tsiv miner on an Nvidia card, I have no email address parameter in that config file,
it says all workers should have this, you think that can cause the issue?  
It also says I need a 10 rating, which I'm not sure I have.
[/quote]

v11 puts all my Samsung 480/580 8gb over 1k H/s, I can almost see that un-modded vega 56...