<<  >> (p.256)
    Author Topic: Claymore's CryptoNote AMD GPU Miner v11.3  (Read 2145110 times)

    • cryptathlos
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    December 05, 2017, 07:33:19 PM
     #5101
    Quote from: notbatman on December 05, 2017, 05:21:34 PM
    ^^^ I'd like to recommend the rx580-8gb for use with this miner.

    Agreed. I would prefer to keep the 4gb prices lower and for myself.   Grin

  • uDwcHYO
    Full Member
    ***
    Offline Offline

    Activity: 363
    Merit: 100


    View Profile
    December 06, 2017, 01:27:28 AM
     #5102
    miner show me only temperature for one card, how can i fix this? in config file nothing unusual, only pool data

    GPU0 t=51C fan=42%
    XMR: 12/06/17-06:24:26 - SHARE FOUND - (GPU 3)
    Share accepted (156 ms)!
    XMR: 12/06/17-06:24:32 - SHARE FOUND - (GPU 3)
    Share accepted (125 ms)!
    XMR: 12/06/17-06:24:40 - New job from xmr-eu1.nanopool.org:14444
    XMR - Total Speed: 3334 H/s, Total Shares: 24, Rejected: 0, Time: 00:13
    XMR: GPU0 834 H/s, GPU1 834 H/s, GPU2 834 H/s, GPU3 832 H/s
    XMR:  Stale share found - skip
    GPU0 t=50C fan=42%
    GPU0 t=51C fan=42%
    zzz

  • Call_Me_Bambi
    Sr. Member
    ****
    Offline Offline

    Activity: 574
    Merit: 261


    View Profile
    December 06, 2017, 02:10:43 AM
     #5103
    Quote from: dollos on December 05, 2017, 02:54:34 PM
    Hi, could someone possible put there batch file for electroneum for ver 10.2 please? on mining pool   pool.electroneum.space    
    thanks

    This is the batch file I've been using, with Ver 10.2, on pool.electroneum.space , with any luck MiningPoolHub http://miningpoolhub.com will soon have ETN on there list of coins.

    Code:
    setx GPU_FORCE_64BIT_PTR 1
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_SINGLE_ALLOC_PERCENT 100
    setx GPU_MAX_ALLOC_PERCENT 100

    NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10

  • NetWhiz
    Newbie
    *
    Offline Offline

    Activity: 49
    Merit: 0


    View Profile
    December 06, 2017, 02:14:30 AM
     #5104
    Quote from: androstan1234 on December 05, 2017, 02:54:58 PM
    Quote from: androstan1234 on December 05, 2017, 01:52:08 PM
    Rig runs fine on the latest version of ether dual miner.  But when I run the latest version of cryptonote I get this:

    08:46:29:818   abc   GPU 4, GpuMiner dk2a failed -4
    08:46:29:827   bd0   Job changed, drop current round
    08:46:29:836   ac0   Job changed, drop current round
    08:46:29:855   9c0   GPU 3, GpuMiner dk2a failed -4
    08:46:29:897   a30   Job changed, drop current round
    08:46:29:904   a28   Job changed, drop current round
    08:46:29:927   a28   GPU 3, GpuMiner dk2a failed -4
    08:46:29:935   a44   GPU 3, GpuMiner dk2an0 failed -4
    08:46:29:945   a30   GPU 3, GpuMiner dk2an0 failed -4
    08:46:29:958   a9c   GPU 2, GpuMiner dk2a failed -4
    08:46:30:149   ac0   GPU 4, GpuMiner dk2a failed -4

    I tried setting -h 1024.  I also have virtual memory and environment variables set.

    Set your VM to a minimum of 4GB for each GPU (prefer 8GB if you have 8GB cards). This miner is very memory heavy on VM though it uses less when running. I have 6 8GB cards in each rig and set the VM to start at 16 and max at 50. Works fine then.

  • dollos
    Newbie
    *
    Offline Offline

    Activity: 30
    Merit: 0


    View Profile
    December 06, 2017, 07:03:29 AM
     #5105
    Quote from: Call_Me_Bambi on December 06, 2017, 02:10:43 AM
    Quote from: dollos on December 05, 2017, 02:54:34 PM
    Hi, could someone possible put there batch file for electroneum for ver 10.2 please? on mining pool   pool.electroneum.space    
    thanks

    This is the batch file I've been using, with Ver 10.2, on pool.electroneum.space , with any luck MiningPoolHub http://miningpoolhub.com will soon have ETN on there list of coins.

    Code:
    setx GPU_FORCE_64BIT_PTR 1
    setx GPU_MAX_HEAP_SIZE 100
    setx GPU_USE_SYNC_OBJECTS 1
    setx GPU_SINGLE_ALLOC_PERCENT 100
    setx GPU_MAX_ALLOC_PERCENT 100

    NsGpuCNMiner -xpool stratum+tcp://pool.electroneum.space:3333 -xwal etnkHJemadZhrZFie58xd5LL1huV848cn1h2ZSCZfefCdLgVBKwthwZ8hvALdoZHgkAahKwtsqedSRRtmeD3iops3Bw6JXw1xM -xpsw x -nofee 1 -allpools 1 -ftime 10



    Thank you very much, really appreciate the help.!!!

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    December 06, 2017, 07:26:14 AM
     #5106
    Quote from: cryptathlos on December 05, 2017, 07:33:19 PM
    Quote from: notbatman on December 05, 2017, 05:21:34 PM
    ^^^ I'd like to recommend the rx580-8gb for use with this miner.

    Agreed. I would prefer to keep the 4gb prices lower and for myself.   Grin

    Have at 'em the 4gb cards are all crap.

  • spyshagg
    Full Member
    ***
    Offline Offline

    Activity: 176
    Merit: 100


    View Profile
    December 06, 2017, 11:58:59 AM
     #5107
    I'm testing this miner and its using more power than xmr-stack for only ~50h/s more.    Anyone else noticed the same?

  • Marvell2
    Full Member
    ***
    Offline Offline

    Activity: 1148
    Merit: 132


    View Profile
    December 06, 2017, 12:11:31 PM
     #5108
    Quote from: spyshagg on December 06, 2017, 11:58:59 AM
    I'm testing this miner and its using more power than xmr-stack for only ~50h/s more.    Anyone else noticed the same?

    yeah seeing the same but im using cast xmr , what hash rates are you getting ?

    for my underclocked 470s i see 700 h/s 1100 core and 1925 mem ,
    for my underclocked 480 i see 800 h/s 1100 core and 2100 mem

    on cast i see like 660 and 730 respectively , but less power use

  • spyshagg
    Full Member
    ***
    Offline Offline

    Activity: 176
    Merit: 100


    View Profile
    December 06, 2017, 12:30:53 PM
     #5109
    Quote from: Marvell2 on December 06, 2017, 12:11:31 PM
    Quote from: spyshagg on December 06, 2017, 11:58:59 AM
    I'm testing this miner and its using more power than xmr-stack for only ~50h/s more.    Anyone else noticed the same?

    yeah seeing the same but im using cast xmr , what hash rates are you getting ?

    for my underclocked 470s i see 700 h/s 1100 core and 1925 mem ,
    for my underclocked 480 i see 800 h/s 1100 core and 2100 mem

    on cast i see like 660 and 730 respectively , but less power use

    what arguments to make Cast work on rx570's ?

    I'm seeing 800h/s on average using claymore 1080gpu/1950mem @825mv  ~60w (gpu-z)

    On the 290's I'm seeing 780h/s 1000/1100 89w (gpu-z) on average but with high spikes to 120w

  • nowaltcoin
    Full Member
    ***
    Offline Offline

    Activity: 158
    Merit: 100


    View Profile
    December 06, 2017, 12:48:44 PM
     #5110
    Dear Mister (Sir) Claymore,

    will there be a chance for a new version (10.3?) so that i can use my bulk of Hd7850/r9 270/hd7790.
    It would be very nice!

    At the moment the 'Pitcairn' cards throw a lot of errors (miscalculated) and for the bonaire there is no asm anymore in 10.2
    So i stuck  at 9.7 with most of my cards ;( .

    Have a nice day

    8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org
    12 * GPU's mining ETN/Sumocoin
    You like to mine something different: https://deutsche-emark.de/

  • androstan1234
    Jr. Member
    *
    Offline Offline

    Activity: 251
    Merit: 6


    View Profile
    December 06, 2017, 02:02:58 PM
     #5111
    Quote from: NetWhiz on December 06, 2017, 02:14:30 AM
    Quote from: androstan1234 on December 05, 2017, 02:54:58 PM
    Quote from: androstan1234 on December 05, 2017, 01:52:08 PM
    Rig runs fine on the latest version of ether dual miner.  But when I run the latest version of cryptonote I get this:

    08:46:29:818   abc   GPU 4, GpuMiner dk2a failed -4
    08:46:29:827   bd0   Job changed, drop current round
    08:46:29:836   ac0   Job changed, drop current round
    08:46:29:855   9c0   GPU 3, GpuMiner dk2a failed -4
    08:46:29:897   a30   Job changed, drop current round
    08:46:29:904   a28   Job changed, drop current round
    08:46:29:927   a28   GPU 3, GpuMiner dk2a failed -4
    08:46:29:935   a44   GPU 3, GpuMiner dk2an0 failed -4
    08:46:29:945   a30   GPU 3, GpuMiner dk2an0 failed -4
    08:46:29:958   a9c   GPU 2, GpuMiner dk2a failed -4
    08:46:30:149   ac0   GPU 4, GpuMiner dk2a failed -4

    I tried setting -h 1024.  I also have virtual memory and environment variables set.

    Set your VM to a minimum of 4GB for each GPU (prefer 8GB if you have 8GB cards). This miner is very memory heavy on VM though it uses less when running. I have 6 8GB cards in each rig and set the VM to start at 16 and max at 50. Works fine then.

    Thank you kindly, this worked.  One gpu has low hash rate (~250 h/s vs ~750 h/s for the rest), and not always the same one, which is odd. 

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    December 06, 2017, 03:33:06 PM
    Last edit: December 06, 2017, 07:25:34 PM by notbatman
     #5112
    I just found all my miners offline due to segmentation fault (core dumped) even with a failover pool this is happening again...

    This sucks, I almost think it's being triggered on purpose as it only happens right after I fall asleep or leave the miners unattended. I lost like 10?+ hours of hashing, fuck.



    edit:

    OK I figured it out every server and all of nicehash has gone down, my failover server was the nicehash eu server and it looks like it went down with the usa server,

    I'll use miningpoolhub.com as my failover now as I know they use cloudflare.




    edit_2:

    my btcs? my precious btcs?

  • baga105
    Sr. Member
    ****
    Offline Offline

    Activity: 360
    Merit: 250


    View Profile
    December 06, 2017, 03:45:57 PM
     #5113
    So far soo good on my rigs.. Will see for how long. I always had problems with this miner in the past
    Ass, Gas or Grass! No one rides for free!

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    December 06, 2017, 03:55:33 PM
     #5114
    Quote from: baga105 on December 06, 2017, 03:45:57 PM
    So far soo good on my rigs.. Will see for how long. I always had problems with this miner in the past

    I've been mining on nicehash, I think this problem is just with them or perhaps ssl related? This is a miner breaking issue....

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    December 06, 2017, 04:08:41 PM
    Last edit: December 06, 2017, 05:43:53 PM by notbatman
     #5115
    Wow, today is not my day. I jumped off nicehash and now they're DDoSing the new pool I connected to... crap on a stick!






    0 H/s  QQ

    OMG they're tottaly fucking the pools front end too!!



    edit:

    etn.sup.rnova.cc have cloudflare!!!!



    edit_2:

    Their hashrate dashboard meter is in MH/s LOL.

  • arjet
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    December 06, 2017, 04:10:06 PM
     #5116
    anyone can help my make start. bat file for monero mining in nanopool? i use poloniex wallet with XMR address. thanks.. Huh

  • spyshagg
    Full Member
    ***
    Offline Offline

    Activity: 176
    Merit: 100


    View Profile
    December 06, 2017, 04:54:56 PM
     #5117
    Quote from: arjet on December 06, 2017, 04:10:06 PM
    anyone can help my make start. bat file for monero mining in nanopool? i use poloniex wallet with XMR address. thanks.. Huh

    Open poloniex, click your xmr deposit wallet, copy the wallet address.

    In the file epools.txt add at the bottom:
    Quote
    POOL: stratum+tcp://xmr-eu1.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0
    POOL: stratum+tcp://xmr-eu2.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0

    In the file Config.txt, delete everything in there. Must be empty for now.

    On your start.bat, add this:
    Quote
    GPU_FORCE_64BIT_PTR 1
    GPU_MAX_HEAP_SIZE 100
    GPU_USE_SYNC_OBJECTS 1
    GPU_MAX_ALLOC_PERCENT 100
    GPU_SINGLE_ALLOC_PERCENT 100
    NsGpuCNMiner.exe


    Now run the start.bat

    thats it.


    Everytime you need to add extra pools, add them to the epools.txt
    Everytime you need to add arguments (set temperatures, voltages etc) add them to the config.txt

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    December 06, 2017, 05:08:26 PM
     #5118
    ^^^ use multiple failover pools if you're on linux!

  • arjet
    Newbie
    *
    Offline Offline

    Activity: 15
    Merit: 0


    View Profile
    December 06, 2017, 05:21:43 PM
     #5119
    Quote from: spyshagg on December 06, 2017, 04:54:56 PM
    Quote from: arjet on December 06, 2017, 04:10:06 PM
    anyone can help my make start. bat file for monero mining in nanopool? i use poloniex wallet with XMR address. thanks.. Huh

    Open poloniex, click your xmr deposit wallet, copy the wallet address.

    In the file epools.txt add at the bottom:
    Quote
    POOL: stratum+tcp://xmr-eu1.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0
    POOL: stratum+tcp://xmr-eu2.nanopool.org:14444, WALLET: ffdsfsdfsfsfdfdfsddddddddddddffffffffffffffffffffffffffffffffffffffffffffffffff ffffffff.mycomputer, PSW: x, ALLPOOLS: 0

    In the file Config.txt, delete everything in there. Must be empty for now.

    On your start.bat, add this:
    Quote
    GPU_FORCE_64BIT_PTR 1
    GPU_MAX_HEAP_SIZE 100
    GPU_USE_SYNC_OBJECTS 1
    GPU_MAX_ALLOC_PERCENT 100
    GPU_SINGLE_ALLOC_PERCENT 100
    NsGpuCNMiner.exe


    Now run the start.bat

    thats it.


    Everytime you need to add extra pools, add them to the epools.txt
    Everytime you need to add arguments (set temperatures, voltages etc) add them to the config.txt


    Thanks alot. running now

  • Bitoken
    Jr. Member
    *
    Offline Offline

    Activity: 61
    Merit: 7


    View Profile
    December 06, 2017, 06:22:47 PM
     #5120
    Hi, just a message to say that -dgb -1 is not working
    Pages: « 1 ... 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 [256] 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 ... 325 »
      Print  
Page 255
Viewing Page: 256

IRLBTC™ © 2025 IRLBTC.com