<<  >> (p.254)
    Author Topic: Claymore's CryptoNote AMD GPU Miner v11.3  (Read 2145110 times)

    • Call_Me_Bambi
    Sr. Member
    ****
    Offline Offline

    Activity: 574
    Merit: 261


    View Profile
    November 27, 2017, 12:30:54 AM
     #5061
    Quote from: invicta on November 26, 2017, 02:39:09 PM
    Quote from: Pennywis3 on November 26, 2017, 01:49:35 PM
    Quote from: Call_Me_Bambi on November 26, 2017, 09:47:10 AM
    Ah yes, gatelessgate; I gave it a quick go sometime back but found that Claymore's Cryptonote miner was much better. Sgminer is another one I've used but lately I've found Claymore's miner to be a bit better. Sgminer used to be, for me, better than Claymore, something must have changed in my setup, I shall investigate.

    Don't know what GPUs you are using, but for mining XMR on RX 4x0,5x0 GPUs , claymore is not even remotely as fast as a properly set up SGminer GM.
    The only problem SGminer GM has is not being up to date, so there's problems with changing voltage, clock eth., but that can be done with other tools as well.

    So yea, there's probably something changed in your setup Smiley

    Do you have a suggested guide or thread for SGMiner GM? I know it's not been updated in a while. The thing I always liked about Claymore is it seems to auto-configure itself quite nicely and generally pretty well, that's why a lot of people (me included) use it.

    There is a thread for SGminer-GM here https://bt.irlbtc.com/view/1612329.0 . It's not a busy thread but there are still some occasional new posts but, as said, your pretty much on your own.

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    November 27, 2017, 09:51:07 AM
    Last edit: November 27, 2017, 11:17:53 AM by notbatman
     #5062
    Crap, I was mining on nicehash via SSL when all my miners (linux/cc v10.2) got disconnected, when they reconnected they all complained about a server error then experienced a segmentation fault except for one rig that just froze.

    My windows rig was connected with gatelessgate via the regular nicehash port and it's still up and running.

    Here's a log snippet from one of the miners right before it crashed:

    Code:
    ...
    00:18:05:489 da70f740 GPU 5 temp = 63, old fan speed = 72, new fan speed = 75

    00:18:07:574 98ff9700 cert subject:C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/emailAddress=info@nicehash.com
    00:18:07:575 98ff9700 cert issuer:C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/emailAddress=info@nicehash.com
    00:18:07:575 98ff9700 SSL/TLS encryption is enabled
    00:18:07:575 98ff9700 send: {"method": "login", "params": {"login": "REDACTED_FOR_BCT_FORUM_POST", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

    00:18:07:575 98ff9700 XMR: Stratum - Connected (cryptonight.usa.nicehash.com:33355) (SSL/TLS)
    00:18:07:656 98ff9700 got 79 bytes
    00:18:07:656 98ff9700 buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internal server error"}}

    00:18:07:656 98ff9700 parse packet: 76
    00:18:07:656 98ff9700 Error in server response
    : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
    00:18:07:657 98ff9700 buf was cleared

  • tg88
    Legendary
    *
    Offline Offline

    Activity: 2730
    Merit: 1747


    View Profile
    November 27, 2017, 11:25:59 AM
     #5063
    Quote from: notbatman on November 27, 2017, 09:51:07 AM
    Crap, I was mining on nicehash via SSL when all my miners (linux/cc v10.2) got disconnected, when they reconnected they all complained about a server error then experienced a segmentation fault except for one rig that just froze.

    My windows rig was connected with gatelessgate via the regular nicehash port and it's still up and running.

    Here's a log snippet from one of the miners right before it crashed:

    Code:
    ...
    00:18:05:489 da70f740 GPU 5 temp = 63, old fan speed = 72, new fan speed = 75

    00:18:07:574 98ff9700 cert subject:C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/emailAddress=info@nicehash.com
    00:18:07:575 98ff9700 cert issuer:C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/emailAddress=info@nicehash.com
    00:18:07:575 98ff9700 SSL/TLS encryption is enabled
    00:18:07:575 98ff9700 send: {"method": "login", "params": {"login": "REDACTED_FOR_BCT_FORUM_POST", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

    00:18:07:575 98ff9700 XMR: Stratum - Connected (cryptonight.usa.nicehash.com:33355) (SSL/TLS)
    00:18:07:656 98ff9700 got 79 bytes
    00:18:07:656 98ff9700 buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internal server error"}}

    00:18:07:656 98ff9700 parse packet: 76
    00:18:07:656 98ff9700 Error in server response
    : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
    00:18:07:657 98ff9700 buf was cleared


    That also happened to my rigs today.

    is a problem that occurs with some frequency mining in the nicehash.

  • invicta
    Member
    **
    Offline Offline

    Activity: 194
    Merit: 10


    View Profile
    November 27, 2017, 12:14:41 PM
     #5064
    Quote from: notbatman on November 27, 2017, 09:51:07 AM
    Crap, I was mining on nicehash via SSL when all my miners (linux/cc v10.2) got disconnected, when they reconnected they all complained about a server error then experienced a segmentation fault except for one rig that just froze.

    My windows rig was connected with gatelessgate via the regular nicehash port and it's still up and running.

    Here's a log snippet from one of the miners right before it crashed:

    Code:
    ...
    00:18:05:489 da70f740 GPU 5 temp = 63, old fan speed = 72, new fan speed = 75

    00:18:07:574 98ff9700 cert subject:C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/emailAddress=info@nicehash.com
    00:18:07:575 98ff9700 cert issuer:C=SI/ST=Slovenia/L=Ljubljana/O=NiceHash/CN=*.nicehash.com/emailAddress=info@nicehash.com
    00:18:07:575 98ff9700 SSL/TLS encryption is enabled
    00:18:07:575 98ff9700 send: {"method": "login", "params": {"login": "REDACTED_FOR_BCT_FORUM_POST", "pass": "x", "agent": "xmr/1.0"}, "id": 1}

    00:18:07:575 98ff9700 XMR: Stratum - Connected (cryptonight.usa.nicehash.com:33355) (SSL/TLS)
    00:18:07:656 98ff9700 got 79 bytes
    00:18:07:656 98ff9700 buf: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internal server error"}}

    00:18:07:656 98ff9700 parse packet: 76
    00:18:07:656 98ff9700 Error in server response
    : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
    00:18:07:657 98ff9700 buf was cleared


    I just wanted to add that it happened to me as well. If it keeps occurring I'll likely end up mining Equihash instead but their Cryptonote servers have been really flaky recently, first it was 'shareabovetarget' errors on EU, now this. Most of my rigs crashed the software but one hard-locks when the graphics cards come out of 3D mode and drop their clocks back (I assume it's voltage offset is too low). Has anyone had a response from Nicehash?

  • garytheasshole
    Full Member
    ***
    Offline Offline

    Activity: 406
    Merit: 105


    Chosŏn Minjujuŭi Inmin Konghwaguk


    View Profile WWW
    November 27, 2017, 12:32:31 PM
     #5065
    Nicehash is the work of Satan! Don't give them your hashrate they have way too much as it is, too much power in the hands of a single entity is never a good idea, power corrupts.
    North Korea is the best Korea!

  • notbatman
    Legendary
    *
    Offline Offline

    Activity: 2212
    Merit: 1038



    View Profile
    November 28, 2017, 02:26:33 AM
     #5066
    I've added the -allpools 1 option, we'll see if that changes anything...

    As for mining on NH it's a double edged sword, It really does pay nicely even if new coins get totally fucked up. The skilled dev will tweak the difficulty re-targeting algorithm accordingly and the shitty dev will swap to ETH tokens. It's a hardening process, perhaps a hammer not a sword is a better analogy.

     

  • invicta
    Member
    **
    Offline Offline

    Activity: 194
    Merit: 10


    View Profile
    November 28, 2017, 12:41:58 PM
     #5067
    Quote from: notbatman on November 28, 2017, 02:26:33 AM
    I've added the -allpools 1 option, we'll see if that changes anything...

    As for mining on NH it's a double edged sword, It really does pay nicely even if new coins get totally fucked up. The skilled dev will tweak the difficulty re-targeting algorithm accordingly and the shitty dev will swap to ETH tokens. It's a hardening process, perhaps a hammer not a sword is a better analogy.

     

    What do you expect 'allpools 1' will do?

    Nicehash is also good for getting paid in BTC without owning ASICs.

    Finally, Thor's hammer was smashed by Hela recently - how does that fit into the analogy Grin

  • antituto2
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    November 29, 2017, 11:54:17 AM
     #5068
    I try with 6990 4GB but ASM not working

    any command? I use 9.7 now

  • invicta
    Member
    **
    Offline Offline

    Activity: 194
    Merit: 10


    View Profile
    November 29, 2017, 12:01:07 PM
     #5069
    Quote from: antituto2 on November 29, 2017, 11:54:17 AM
    I try with 6990 4GB but ASM not working

    any command? I use 9.7 now

    "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

    Read the readme!

  • ser_ator
    Newbie
    *
    Offline Offline

    Activity: 22
    Merit: 0


    View Profile
    November 29, 2017, 08:15:07 PM
     #5070
    Quote from: invicta on November 29, 2017, 12:01:07 PM
    Quote from: antituto2 on November 29, 2017, 11:54:17 AM
    I try with 6990 4GB but ASM not working

    any command? I use 9.7 now

    "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

    Read the readme!

    for 9,7 version write  " -a 3 " in command line for old card (5xxx & 6xxx) :

    "-a   Select algorithm:
       "-a 0" (default) means autoselection.
       "-a 1" fastest mining mode for 290/290x and 270/270x cards.
       "-a 2" low power consumption mode for 290/290x cards. A bit less speed (1%) but less power consumption (10-15%).
       "-a 3" fastest mining for old cards (6xxx and 5xxx).
       "-a 4" fastest mining for recent cards (280x, 270/270x etc).
       You can also specify mode for every card separately, for example, "-a 1234".
       It is very important for good mining speed to select correct "-a" and "-h" values for your cards.
       For old cards 5xxx and 6xxx use "-a 3" mode only, otherwise you can get "LowDifficultyShare" errors from pool."

  • boppzoli
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    November 29, 2017, 09:06:21 PM
     #5071
    Hello,
    Can I use Claymore's 10.2 beta XMR miner with poloniex integrated wallet address?
    My wallet at poloniex is 4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgR wsQvVCjZbS3oPFsdpb3PEVAEezY
    Thank you in advance!

  • Call_Me_Bambi
    Sr. Member
    ****
    Offline Offline

    Activity: 574
    Merit: 261


    View Profile
    November 30, 2017, 12:35:50 AM
     #5072
    Quote from: icedutah on November 29, 2017, 09:35:21 PM
    Can I dual mine the Cryptonight algorithm and Decred?

    I don't think there is a dual mining option in Claymore's Crytonote miner, if you want dual mining you'll need to use Claymore's dual miner https://bt.irlbtc.com/view/1433925.0

  • Maxima3891
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    November 30, 2017, 04:17:57 PM
     #5073
    Hi all!

    I get four error messages when I try to mine with Claymore's CryptoNote AMD GPU Miner v10.2 Beta.

    It says:
    Code:
    17:29:51:156 1840 GPU 1, GpuMiner dk2a failed -4
    17:29:51:296 bd4 GPU 1, GpuMiner dk2an0 failed -4
    17:29:51:328 4c4 GPU 1, GpuMiner dk2an0 failed -4
    17:29:51:359 1dc8 GPU 1, GpuMiner dk2an0 failed -4

    That GPU 1 is ASUS Radeon R9 280 DirectCU II 3GB and GPU 0 (Sapphire Radeon RX 480 Nitro+ 8GB) works but with low hashrate = 378 H/s.

    Radeon Software Version is 16.9.1.

    Any help to get them working?

  • BSAlex
    Member
    **
    Offline Offline

    Activity: 239
    Merit: 10


    View Profile
    November 30, 2017, 06:58:18 PM
     #5074
    Quote from: Maxima3891 on November 30, 2017, 04:17:57 PM
    Hi all!

    I get four error messages when I try to mine with Claymore's CryptoNote AMD GPU Miner v10.2 Beta.

    It says:
    Code:
    17:29:51:156 1840 GPU 1, GpuMiner dk2a failed -4
    17:29:51:296 bd4 GPU 1, GpuMiner dk2an0 failed -4
    17:29:51:328 4c4 GPU 1, GpuMiner dk2an0 failed -4
    17:29:51:359 1dc8 GPU 1, GpuMiner dk2an0 failed -4

    That GPU 1 is ASUS Radeon R9 280 DirectCU II 3GB and GPU 0 (Sapphire Radeon RX 480 Nitro+ 8GB) works but with low hashrate = 378 H/s.

    Radeon Software Version is 16.9.1.

    Any help to get them working?

    Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

  • Maxima3891
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    November 30, 2017, 07:29:27 PM
     #5075
    Quote from: BSAlex on November 30, 2017, 06:58:18 PM
    Quote from: Maxima3891 on November 30, 2017, 04:17:57 PM
    Hi all!

    I get four error messages when I try to mine with Claymore's CryptoNote AMD GPU Miner v10.2 Beta.

    It says:
    Code:
    17:29:51:156 1840 GPU 1, GpuMiner dk2a failed -4
    17:29:51:296 bd4 GPU 1, GpuMiner dk2an0 failed -4
    17:29:51:328 4c4 GPU 1, GpuMiner dk2an0 failed -4
    17:29:51:359 1dc8 GPU 1, GpuMiner dk2an0 failed -4

    That GPU 1 is ASUS Radeon R9 280 DirectCU II 3GB and GPU 0 (Sapphire Radeon RX 480 Nitro+ 8GB) works but with low hashrate = 378 H/s.

    Radeon Software Version is 16.9.1.

    Any help to get them working?

    Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

    Thank you for your answer!

    I had a 17000MB Virtual Memory and I increased it to 20480MB but it didn't help Sad. Any other ideas what I could try?
    Oh.. And I updated drivers to 17.11.4. That didn't help either.

  • BSAlex
    Member
    **
    Offline Offline

    Activity: 239
    Merit: 10


    View Profile
    November 30, 2017, 07:54:33 PM
     #5076
    Quote from: Maxima3891 on November 30, 2017, 07:29:27 PM


    Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

    I had a 17000MB Virtual Memory and I increased it to 20480MB but it didn't help Sad. Any other ideas what I could try?
    Oh.. And I updated drivers to 17.11.4. That didn't help either.
    [/quote]

    I'll remove RX480 from your system, deinstall current driver with latest DDU and install august blockchain drivers.

  • Maxima3891
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    November 30, 2017, 08:04:13 PM
     #5077
    Quote from: BSAlex on November 30, 2017, 07:54:33 PM
    Quote from: Maxima3891 on November 30, 2017, 07:29:27 PM


    Check you virtual memory settings. Usually dk2a error is assosiated with low virtual memory. Set more then combined all GPU memory/

    I had a 17000MB Virtual Memory and I increased it to 20480MB but it didn't help Sad. Any other ideas what I could try?
    Oh.. And I updated drivers to 17.11.4. That didn't help either.

    I'll remove RX480 from your system, deinstall current driver with latest DDU and install august blockchain drivers.
    [/quote]

    I managed to fix it. I had to put line "-dmem 0" to config file because otherwise it used too much memory in 280 (over 3100MB and 280 have only 3072MB).

  • invicta
    Member
    **
    Offline Offline

    Activity: 194
    Merit: 10


    View Profile
    December 01, 2017, 09:48:05 AM
     #5078
    Quote from: ser_ator on November 29, 2017, 08:15:07 PM
    Quote from: invicta on November 29, 2017, 12:01:07 PM
    Quote from: antituto2 on November 29, 2017, 11:54:17 AM
    I try with 6990 4GB but ASM not working

    any command? I use 9.7 now

    "This version is for recent AMD videocards only: 7xxx, 2xx, 3xx and 4xx, 1GB or more."

    Read the readme!

    for 9,7 version write  " -a 3 " in command line for old card (5xxx & 6xxx) :

    "-a   Select algorithm:
       "-a 0" (default) means autoselection.
       "-a 1" fastest mining mode for 290/290x and 270/270x cards.
       "-a 2" low power consumption mode for 290/290x cards. A bit less speed (1%) but less power consumption (10-15%).
       "-a 3" fastest mining for old cards (6xxx and 5xxx).
       "-a 4" fastest mining for recent cards (280x, 270/270x etc).
       You can also specify mode for every card separately, for example, "-a 1234".
       It is very important for good mining speed to select correct "-a" and "-h" values for your cards.
       For old cards 5xxx and 6xxx use "-a 3" mode only, otherwise you can get "LowDifficultyShare" errors from pool."

    I might have misread his comment but I understood it to mean he is using 10.2 but it doesn't work so he's going to go back and use 9.7. AFAIK 10.2 won't work on a 6990 but it will on 9.7 with the algorithm switch you provided.

  • boppzoli
    Newbie
    *
    Offline Offline

    Activity: 3
    Merit: 0


    View Profile
    December 01, 2017, 10:02:58 AM
     #5079
    Hi,
    Can I use Claymore's 10.2 beta XMR miner with poloniex integrated wallet address?
    My wallet at poloniex looks like: 4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgR wsQvVCjZbS3oPFsdpb3PEVAEezY
    Thank you in advance!

  • phuocduong
    Member
    **
    Offline Offline

    Activity: 182
    Merit: 10


    View Profile
    December 01, 2017, 10:10:44 AM
     #5080
    Quote from: boppzoli on December 01, 2017, 10:02:58 AM
    Hi,
    Can I use Claymore's 10.2 beta XMR miner with poloniex integrated wallet address?
    My wallet at poloniex looks like: 4JUdGzvrMFDWrUUwY3toJATSeNwjn54LkCnKBPRzDuhzi5vSepHfUckJNxRL2gjkNrSqtCoRUrEDAgR wsQvVCjZbS3oPFsdpb3PEVAEezY
    Thank you in advance!

    using wallet.payment ... in config
    Pages: « 1 ... 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 [254] 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 ... 325 »
      Print  
Page 253
Viewing Page: 254

IRLBTC™ © 2025 IRLBTC.com