ok, thanks.

Just set it to yes in 1bash


change to:

Nope, if you really need dual_cuda support and you can't reimage right now, you could try installing the other cuda-9-2 runtime manually (use cuda distribution specific packages, never cuda runfiles), but you have to be very careful because it could mess with nvidia drivers and get you unable to boot or recover remotely.

Hi! Any one can help me with login, user m1 pass miner1 not working, going to the same login windows

May not be a wrong password problem.

Due to Ubuntu 18.04 libcurl3/4 limitations I will make a dual cuda 16.04 image when I find some free time

I finally just had to reflash the USB until it took. It still gets the error but it doesn't stop the miner from starting now, thankfully. Overall it was a bigger pain to initial boot compared to 19 - 2.0 but with the new cuda enhancements I can run a much more efficient miner. ~50% more hash rate and efficiency per watt!
Thanks for your continued work and support for nvoc!

my rig no 1 is currently constantly rebooting because watchdog loses gpu0-7 after a couple of minutes even though they are mining fine. I wanted to disable the watchdog/auto reboot but this is the opton "auto start miner = yes" which prevents the mining starting at all if set to no...

Even though the error was more like "lost" I will try that but what I was concerned about is that I am not able to start the system with bash nvOC start because the mining process won't start. Only when auto start option is active and that doesnt stop watchdog rebooting in fail case even when watchdog disabled.

In other words: a seperate option to start mining process once with script is requested. I can fire the whole command manually by myself but maybe not everyone is able to

Hi there,

i have a strange problem. Updated a long running nvOC 19 2.0 community release rig consisting of 4 1050ti`s with one more 1050ti so it contains 5 now but it is only showing 4 GPU`s i can´t get nvOC to use the 5th gpu.

In order for you to spare a few hints i did the following.
On the hardware side i checked all risers and cables, also i swapped all cards within the rig, didn´t change anything it continues to mine with only 4 gpu`s. Then i swapped all cards into a different rig to see whether a card was faulty, it was not.

So, as far as hardware goes:
1. All risers and all cables check good
2. All gpu´s work (just not within this nvOC rig)

So i went on with the software side of things:

First i stopped everything with

then i checked the Nvidia X-Server it only shows gpu 0-3 so the 5th is missing

then i updated the nvOC installation with

and rebooted.

No change it works and is mining with 4 gpu´s it does not recognize the 5th and i can´t get it to do so.

Using
only finds 4 gpu´s

Any ideas?