I am sure this has been asked before, can i update claymore manually ? 

Guys, if you know any alternative way to automatically start a bash script in a terminal window on boot which is not gnome-dependent, please, take a look here:

https://github.com/papampi/nvOC_by_fullzero_Community_Release/issues/41

Thank you in advance!

Meanwhile you can try by yourself to integrate into nvOC 2.1 dev tree miners subrepo on github, take a look at README and other existing open-source miners already added to understand what's needed. Then if you are good to go open a PR with it.

https://github.com/papampi/nvOC_miners/tree/19-2.1

Hey papampi! I’m trying to help a friend out who’s getting a line 44 3main error 2693 terminated

Instead of trying to fix this, what commands can I use to just download and wipe all of the nvOC config files?

The only time I have ever had a rig freeze was ultimately due to OC being too high. Lowering the GPU OC by just a bit (5 or 10) fixed my issue.

I am not sure I totally understand your question, but if you want to disable the the 3main restart, the only way to do this is to not run the watchdog at all. To do that, change this in 1bash:

MINER_WATCHDOG="YES"

to

MINER_WATCHDOG="NO"

Shouldn't be an overclock issue. Running Hush right now for two days straight no issue.

Running 50 core and 200 mem at 80% TDP.

Def do not want to turn off watchdog. I've ran with these settings fine for multiple coins and long periods of time. ETH was running for over a month with zero issues and now all the sudden with the same settings, same miner, different rigs crashes every 12ish hours within minutes of eachother. Even switched servers and same issue. Something else is at play here.

Like I mentioned, my personal desktop that mines I see ethminer restart randomly exactly when the rigs go down. It doesn't make much sense.

I had a similar issue to this a few months ago and was told it was an issue within NVOC. That when the miner switched to "donation" mode it would freeze and the solution was to switch miners. I've tried ETHMINER, GENOIL and CLAYMORE. All the same issue.

  Hi all:
   Well been one hell of a move but finally back on line and mining away. Well, almost.  In reading the last few pages, I have had the same freezing and rebooting problems as well. Has been a long road to find the cause of it. I did try the  less overclocks but that really didn't help much. Well, I finally found out what was doing it. It was the temp control program trying to adjust the speed of the fans. Somewhere in the mix it loses the connection with one or more cards but doesn't trigger a reboot. When the utilization falls past the set point, then watchdog does print a message stating that and reboots.
   So by not running the temp control and using a set fan speed high enough to keep things cool, I am running now with no reboots at all.

This all really started now that the hot weather is here. While it was cool all was good

hope this helps others.       Thay

I noticed a while back that when fans goes too high (over %90) some of my rigs gets unstable and reboot or freeze too
So I tried to keep em cooler with lower power limit and also changed max fan speed in temp control from 100 to 90

From:
To:

In 1bash set

This script will check your nvOC miners and download new ones.
As requested, after download it will ask to recompile them.



Miners Update Script:


Miner Versions: