Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.301)

Author

Topic: [ mining os ] nvoc (Read 418569 times)

hashmasta83

Newbie

Offline

Activity: 28
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 11, 2018, 05:49:05 PM

#6001

I'm trying to figure out the conversion from Windows to Ubuntu OC settings on http://krypto-mining.blogspot.co.uk/2017/09/gtx-1070-oc-settings_15.html. I see the note stating Linux is double windows memory clock but some of the Windows OC settings are in the 2000 Mhz which would equate to 4000 Mhz on Linux. Also for Windows core clock, are these total clock speeds or are the they OC setting past the nominal clock speed? Seems i'm missing something here. Can anyone help me better understand that conversion from Windows to Ubuntu OC settings from damNmad?

leenoox

Full Member

Offline

Activity: 200
Merit: 101

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 11, 2018, 05:58:33 PM

#6002

Quote from: hashmasta83 on February 11, 2018, 05:49:05 PM

Conversion is from Afterburner settings on windows. If you are using different tool to OC under windows this might not apply

nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
nvOC - V0019-2.0 Community Release

hashmasta83

Newbie

Offline

Activity: 28
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 11, 2018, 06:03:56 PM

#6003

Quote from: leenoox on February 11, 2018, 05:58:33 PM

Quote from: hashmasta83 on February 11, 2018, 05:49:05 PM

Conversion is from Afterburner settings on windows. If you are using different tool to OC under windows this might not apply

Okay, i would lead to think that i wouldn't OC my memory clock by 2000 Mhz...haha

I'm just trying to determine how to use the Windows OC settings from damNmad to get a ballpark OC setting for nvOC. So are you saying its not possible?

papampi

Full Member

Offline

Activity: 686
Merit: 140

Linux FOREVER! Resistance is futile!!!

Re: P2 Power mode

February 11, 2018, 06:25:11 PM

#6004

Quote from: terex on February 11, 2018, 05:47:09 PM

Hi,

This might be a recurring topic but I have some 1060 and 1070's, all in P2 mode. Getting these to run with mixed cards that are in P0 like P106 seems more difficult than separating them into two systems, it feels like some type of a race condition. So, I have separated the p2 cards into different systems them but lose 1-2MH on the 1070 running in P2. I can run on Windows and use profile inspector to clear a driver flag called CudaForceP2Mode to off. Does anyone know how to pass this parameter in Nvidia-settings or put binary name/value pair into their xorg.conf?

Pap, any thoughts on who to talk with?

Thanks

I have done everything you can think of to change cards with p2 to p0 with no success.
Please let us know if you found a way.

nvOC - Community Release - free-easy-to-use Nvidia Mining OS
nvOC - Community Release - GitHub
فروش پیچ و مهره

Rig4p

Newbie

Offline

Activity: 59
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 11, 2018, 11:57:02 PM
Last edit: February 12, 2018, 12:32:21 AM by Rig4p

#6005

Quote

MPH usually takes 5-15 minutes to show worker and hashrate

You can use this to check your miner command :

Code:

ps ax | grep miner

This was the command I was looking for.
Unfortunately it is showing me that the miner never changes ports to match what the switcher says I am now mining.
It appears to be stuck on port 20570, ZCASH:

Code:

m1@m1-desktop:~$ ps ax | grep miner
385 ? Ss 0:00 SCREEN -dmSL minerhome/m1/zec/zm/latest/zm_miner --server us-east.equihash-hub.miningpoolhub.com --user xxxxxxx.xxxxxxx --pass x --port 20570 --time
386 pts/27 Ssl+ 53:21home/m1/zec/zm/latest/zm_miner --server us-east.equihash-hub.miningpoolhub.com --user xxxxxxx.xxxxxxx --pass x --port 20570 --time
11073 pts/2 S+ 0:00 grep --color=auto miner
32670 pts/26 Sl+ 34608:17home/m1/cpuOPT/cpuminer -a cryptonight -o stratum+tcp://xmr-us-east1.nanopool.org:14444 -u 47xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.xxxxxxxxxx -p x -t 31
m1@m1-desktop:~$

Could the fact I am CPU mining XMR as well be causing some issues?
I also have other rigs that are not yet using the WTM switcher and are still using the MPH_Equihash switcher until my testing is complete.
Could their setup on MPH be forcing this rig to stay on Equihash switching some how? Seems very unlikely.

And this is the print from the miner but not a single coin is showing in the balance other than ZCASH:

Code:

LAST 10 AUTO SWITCHES:
Sun Feb 11 13:56:10 MST 2018 - Mining switched from ZCL to ZEN
Sun Feb 11 14:21:06 MST 2018 - Mining switched from ZEN to ZEC
Sun Feb 11 15:01:36 MST 2018 - Mining switched from ZEC to FTC
Sun Feb 11 15:07:49 MST 2018 - Mining switched from FTC to ZEC
Sun Feb 11 15:38:59 MST 2018 - Mining switched from ZEC to ZEN
Sun Feb 11 16:03:55 MST 2018 - Mining switched from ZEN to ZCL
Sun Feb 11 16:41:19 MST 2018 - Mining switched from ZCL to ZEC
Sun Feb 11 16:54:16 MST 2018 - Mining switched from ZEC to FTC
Sun Feb 11 17:03:37 MST 2018 - Mining switched from FTC to ZEC
Sun Feb 11 17:22:19 MST 2018 - Mining switched from ZEC to ZCL

damNmad

Full Member

Offline

Activity: 378
Merit: 104

nvOC forever

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 02:20:41 AM

#6006

Quote from: farizfadzimi on February 12, 2018, 11:08:54 PM

Quote from: papampi on February 11, 2018, 09:33:54 AM

Quote from: farizfadzimi on February 11, 2018, 08:41:48 AM

Hi there.

you and the team are such a champ!

thank you so much for this and 'll be sure to donate to you.

I keep getting this error on xorg.

Xorg problem detected.

Restoring Xorg.

Rebooting.

and its on loop.

why?

Need your kind help please.

Both your xorg.conf and its backup are corrupted, 3main tries to restore from backup but it fails too.
As soon as your rig started close gnome-terminal, then open guake with f12.

Run the suggested code and reboot see if it fix it or not.

Code:

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

You can also restore default xorg.conf and xorg.conf.back by this code:

Code:

cdhome/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/restore_xorg.sh
bashhome/m1/Downloads/restore_xorg.sh

You can always find the default xorg.conf Here

thanks a bunch broskis.

okay.

this is where im at.

I am newb to ubuntu/linux distro. so please forgive me.

I just edited 1bash.

Havent even gotten to 3main yet.

Im guessing thats why all these errors pops up.

00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
/home/m1/3main: line 144: nvidia-smi: command not found

LAUNCHING: IAmNotAJeep_and_Maxximus007_WATCHDOG

LAUNCHING: Maxximus007_AUTO_TEMPERATURE_CONTROL

process in screen temp; attach with: screen -r temp

/home/m1/3main: line 455: nvidia-smi: command not found

ERROR: Error querying enabled displays on GPU 0 (Missing Extension).

ERROR: Error querying connected displays on GPU 0 (Missing Extension).

ERROR: Error resolving target specification 'gpu:0' (No targets match target specification), specified in assignment
'[gpu:0]/GPUGraphicsClockOffset[3]=100'.

ERROR: Error querying enabled displays on GPU 0 (Missing Extension).

ERROR: Error querying connected displays on GPU 0 (Missing Extension).

Question.

Is there a manual or a step by step guidelines I could have a look?

Because Im kinda like doing things and reading and going thru the forums for answers.

lol.

Like atom. I like atom.

So i edited 1bash using atom on windows, then I mount the image using rufus to my usb (for the time being)

And I saved my 1bash (from atom -> save as -> 1bash that is in the usb)

This was a trial and error and I couldnt find any guide I could use!

lols.

anyways.

gotta get to editing 3mains that i've missed earlier from editing 1bash.

Oh, is there a way to know how many of my GPU is active?

As in, amongst 8 that I shoved in the slots, which are active and which probably needs switching slots etc etc

Is there a way to know?

I think you are in the right place and i believe that you don't need to edit 3main at all.

You need to follow the instructions provided by @papampi to get your xorg file back.

Quote from: papampi on February 11, 2018, 09:33:54 AM

Both your xorg.conf and its backup are corrupted, 3main tries to restore from backup but it fails too.

As soon as your rig started close gnome-terminal, then open guake with f12.

Run the suggested code and reboot see if it fix it or not.

Quote

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

You can also restore default xorg.conf and xorg.conf.back by this code:

Quote

cdhome/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/restore_xorg.sh
bashhome/m1/Downloads/restore_xorg.sh

From his words, once the rig is UP, close the purple terminal (When you see a message on the right top corner stating 'PRESS F12') and then just press F12 for Guake Terminal.

Run the following command

Quote

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

and do a restart, once the rig is UP, close the purple terminal (When you see a message on the right top corner stating 'PRESS F12') and then just press F12 for Guake Terminal.

type this command (partly answers your last question - show all the active GPU's)

Quote

nvidia-smi

It should give you a list of available GPU's like this :

Quote

If it did, then its fine. The above commands displays all the active GPU's.

There is also another option available in the 2.0 version, through which you can identify the GPU's.

Quote

~/nvOC gpuinfo

which will also lists your GPU's in this format

Quote

m1@m1-desktop:~$/home/m1/nvOC gpuinfo

ID,VENDOR,MODEL,PSTATE,TEMP,FAN,UTILIZATION,POWER,POWERLIMIT,MAXPOWER,GPUCLOCK,MEMCLOCK
--------------------------------------------------------------------------------
0, ASUS, GeForce GTX 1060 6GB, P2, 55, 30, 97, 68.12, 78.00, 140.00, 1835, 4303
1, ASUS, GeForce GTX 1060 6GB, P2, 55, 30, 87, 79.67, 78.00, 140.00, 1809, 4303
2, ASUS, GeForce GTX 1060 6GB, P2, 58, 35, 97, 77.58, 78.00, 140.00, 1822, 4303
3, ASUS, GeForce GTX 1060 6GB, P2, 57, 30, 92, 77.58, 78.00, 140.00, 1784, 4303
4, ASUS, GeForce GTX 1060 6GB, P2, 59, 30, 98, 78.11, 78.00, 140.00, 1847, 4303
5, ASUS, GeForce GTX 1060 6GB, P2, 59, 30, 94, 77.22, 78.00, 140.00, 1784, 4303
6, ASUS, GeForce GTX 1060 6GB, P2, 57, 30, 96, 60.00, 78.00, 140.00, 1809, 4303
7, ASUS, GeForce GTX 1060 6GB, P2, 53, 30, 96, 77.74, 78.00, 140.00, 1873, 4303

One more option to identify GPU's physically which gpu mapped to which number

Quote

~/nvOC gpumap

It will run the fans to 100%, that way you can identify which GPU is mapped to 0 and which GPU is mapped to 1 etc.

Hope it answers all of your questions. Good Luck.

DeepOnion ▬▬ Anonymous and Untraceable ▬▬ ENJOY YOUR PRIVACY JOIN DEEPONION
▐▐▐▐▐▐▐▐ ANN Whitepaper Facebook Twitter Telegram Discord ▌▌▌▌▌▌▌▌
Get $ONION (✔Cryptopia ✔KuCoin) | VoteCentral Register NOW! | Download DeepOnion

hashmasta83

Newbie

Offline

Activity: 28
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 02:27:49 AM
Last edit: February 14, 2018, 01:37:32 AM by hashmasta83

#6007

hey papampi and developers, love working with the OS and tweaking the build. I've been doing some work on v0019-2.0 lately trying to get a few coins to work and here's some issues i found.

For FTC coin i had to change 0miner to this below to make it work, it had incorrect miner listed

Code:

if [ $COIN == "FTC" ]
then
  HCD='/home/m1/KTccminer/ccminer'
  ADDR="$FTC_ADDRESS.$FTC_WORKER"
  screen -dmSL miner $HCD -a neoscrypt -o stratum+tcp://$FTC_POOL:$FTC_PORT -u $ADDR -p $MINER_PWD -i $FTC_INTENSITY
fi

To get XMR to work i had to do the following,

Added this to 0miner for XMR

Code:

if [ $COIN == "XMR" ]
then
  HCD='/home/m1/KTccminer-cryptonight/ccminer'
  ADDR="$XMR_ADDRESS.$XMR_WORKER"
  screen -dmSL miner $HCD -o stratum+tcp://$XMR_POOL:$XMR_PORT -u $ADDR -p $MINER_PWD
fi

Section i had to comment out in 0miner for XMR, as I believe it was screwing with what i have above.

Code:

#if [ $COIN == "XMR" ]
#then
# HCD='/home/m1/xmr/stakGPU/bin/xmr-stak-nvidia'
# ADDR="$XMR_ADDRESS.$XMR_WORKER"
#
# GPUS_FOR_XMR=0
# echo "" >home/m1/tmp_threads
#
# while [ $GPUS_FOR_XMR != $GPUS ]
# do
#
# cat <<EOF >>/home/m1/tmp_threads
#{ "index" : $GPUS_FOR_XMR,
# "threads" : 32, "blocks" : 18,
# "bfactor" : 8, "bsleep" : 10,
# "affine_to_cpu" : false,
# },
...................................etc

In order to get XVG (lyra2rev2 algo) working had to put in auto intensity setting (0) as it had memory errors instantly. Is there any disadvantage to using auto intensity setting? I think it would help with people getting memory errors for having too high of intensity setting.

Addition to 1bash for XVG

Code:

# XVG ## No Need to add stratum+tcp:// to server address
XVG_WORKER="$WORKERNAME"
XVG_ADDRESS="add BTC address"
XVG_POOL="lyra2v2.mine.zpool.ca"
XVG_PORT="4533"
XVG_INTENSITY="0"

and this for Algo specific OC setting in 1bash

Code:

# lyra2vRev2
  if [ $COIN == "MONA" -o $COIN == "VTC" -o $COIN == "XVG" ]
  then
   ALGORITHM="LYRA2REV2"
   POWERLIMIT_WATTS=130
   __CORE_OVERCLOCK=125
   MEMORY_OVERCLOCK=600
  fi

Added this to 0miner for XVG. Can also use $BTC_ADDRESS in place of $ADDR

Code:

if [ $COIN == "XVG" ]
then
  HCD='/home/m1/ASccminer/ccminer'
  ADDR="$XVG_ADDRESS"
  screen -dmSL miner $HCD -a lyra2v2 -o stratum+tcp://$XVG_POOL:$XVG_PORT -u $ADDR -p c=XVG -i $XVG_INTENSITY
fi

After making these changes, i'm able to mine XMR and XVG successfully. Getting about 4700 h/s for XMR using Klaus and around 217 MH/s for XVG. Just wanted to give that feedback, thanks.

taltom

Newbie

Offline

Activity: 6
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 02:36:11 AM

#6008

Giving nvOC a try, but need to use USB wireless adapter. Does anyone know how I install drivers from a CD for nvOC?

Thanks much!

damNmad

Full Member

Offline

Activity: 378
Merit: 104

nvOC forever

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 12:06:56 PM

Merited by Bibi187 (1)

#6009

Quote from: farizfadzimi on February 13, 2018, 04:38:45 AM

Quote from: farizfadzimi on February 13, 2018, 03:09:24 AM

Thank you so much for this.
But when the OS is booted up,
When the F12 for Quake Terminal pops up,
nothing happens.

But its alright.
Thank you so much.
I'll try again.

m1@m1-desktop:~$ nvidia-smi
Mon Feb 12 23:31:40 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.59 Driver Version: 384.59 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 106... Off | 00000000:01:00.0 Off | N/A |
| 0% 49C P8 5W 120W | 121MiB 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 106... Off | 00000000:02:00.0 Off | N/A |
| 0% 43C P8 6W 120W | 1MiB 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 106... Off | 00000000:03:00.0 Off | N/A |
| 0% 46C P8 7W 120W | 1MiB 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 106... Off | 00000000:05:00.0 Off | N/A |
| 0% 50C P8 6W 120W | 1MiB 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 106... Off | 00000000:06:00.0 Off | N/A |
| 0% 43C P8 6W 120W | 1MiB 6072MiB | 0% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1102 G /usr/lib/xorg/Xorg 89MiB |
| 0 1707 G compiz 30MiB |
+-----------------------------------------------------------------------------+
m1@m1-desktop:~$ export DISPLAY=:0
m1@m1-desktop:~$ screen -r miner
There is no screen to be resumed matching miner.
m1@m1-desktop:~$ bash '/home/m1/2unix'

Xorg PROBLEM DETECTED

Restoring Xorg

Rebooting in 5

- problem with Xorg still persists -

I think Imma give it another download.
Perhaps there was an error while i was downloading it.

hey damNmad & papampi,
Its possible for me to install the OS in a master SSD/HDD right?
It is very unstable unless you ssh in and edit from there.

I used filezilla to transfer the ready edited 1bash into the miner.
And before i could do anything,
the above happened.

I'll try again.

Bruv, not sure you have tried all the below steps! Please give it a go. (Wrote all these basic instructions from noobs prespective)

I will try to give you the again step by step.

Given you have managed to type 'nvidia-smi' and I can see nothing wrong except the corrupted xorg file issue.

So, two ways to recover the xorg file :

Instead of typing all these commands, open the firefox browser on RIG, there is a bookmark for this page, open it, browse it till this post and simply copy paste the below commands.

Use mouse right click to copy, if you want to use keyboard shortcuts its Ctrl + Shift + C to copy and Ctrl + Shift + C to paste.

STEP 1 :

a)

Once you are on RIG, close the purple terminal and press F12, get on guake, then type the following :

Quote

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

Then press Enter.

It may ask you for password, which is 'miner1'

b)

Reboot the system and check if it still shows the same xorg issue. You can check by typing 'nvidia-smi' command just like before.

STEP 2 :

If step 1 haven't solved the issue try this

Type this

Quote

cdhome/m1/Downloads

Press Enter

Type this

Quote

wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/restore_xorg.sh

Press Enter

Type this

Quote

bashhome/m1/Downloads/restore_xorg.sh

Press Enter

Pardon me if you have already tried the above steps

If both steps failed to fix the issue, please download the file from here :

https://nvoc-mining-os.com/downloads/download-page-nvidea/

verify the check sum and make a fresh install.

=============================================

Answering to your questions, you can flash this image into your SSD/HDD by using this adapter cable

https://www.amazon.co.uk/USB-SATA-Adapter-Cable-Drives-en-GB-SATA-USB-3-0-converter/dp/B01N2JIQR7

To copy the 1bash file you have many ways :

SSH
Teamviewer
pastebin
filezilla etc.

Rig4p

Newbie

Offline

Activity: 59
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 08:31:29 PM

#6010

Quote from: Rig4p on February 11, 2018, 11:57:02 PM

Quote

MPH usually takes 5-15 minutes to show worker and hashrate

You can use this to check your miner command :

Code:

ps ax | grep miner

This was the command I was looking for.
Unfortunately it is showing me that the miner never changes ports to match what the switcher says I am now mining.
It appears to be stuck on port 20570, ZCASH:

Code:

Any comments on this? At this point I do not believe the switcher is actually switching, just "reporting" correctly some stuff but stuck on one coin.
I see the COIN= getting updated in 1bash when a change occurs. Is some line of code in WTM suppose to restart 1bash when a switch is expected?
Wouldn't you expect to see some balances of random coins on MPH if you were mining them?
Thanks.

damNmad

Full Member

Offline

Activity: 378
Merit: 104

nvOC forever

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 09:17:45 PM

#6011

Quote from: farizfadzimi on February 13, 2018, 08:15:52 PM

Hahahha!
Bruv!
Yes yes I was doing too many things at once I thought I have told you I tried all the steps you mentioned.
Yes, again, from a noob perspective, lols,
I tried the cool bits, also wget the conf and bash em, the problem was still there.
I have managed to get it started tho.
Thank you for the links lol.
Sorry man for the trouble you go thru explaining haha.
I really appreciate it.
Thanks bud.

Ill update more soonest

Hehe, its not just for you bruv, if someone else had similar problem we can use this as tutorial, so I wrote it as from noobs perspective.

Sorry, if i didn't understand it properly (as I was also using my brain in so many things, in fact wrote that at 2:00 AM)

Glad you fixed it finally, mind sharing how you did it?

Don't be sorry, its not at all trouble, we are here to help everyone.

You are welcome

damNmad

Full Member

Offline

Activity: 378
Merit: 104

nvOC forever

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 09:59:27 PM

#6012

Quote from: Rig4p on February 13, 2018, 08:31:29 PM

Quote from: Rig4p on February 11, 2018, 11:57:02 PM

Quote

MPH usually takes 5-15 minutes to show worker and hashrate

You can use this to check your miner command :

Code:

ps ax | grep miner

This was the command I was looking for.
Unfortunately it is showing me that the miner never changes ports to match what the switcher says I am now mining.
It appears to be stuck on port 20570, ZCASH:

Code:

I doubt that CPU mining has any impact on it as they are just two different processes running independently.

Ok, I'm just checking the basic things first. I assume you are trying to use 'SALFTER_MPH_PROFIT_SWITCHING' switcher, its logging the switches but the actual switching isn't happening?

So, you see no balance increases at all with other coins? Was it mining a single coin fine??

In the above switches, all the coins except FTC uses equihash, and MPH_SWITCH works in a way that it doesn't switch ports for every single coin, also am not sure that COIN='XXX' value doesn't change in 1bash as MPH switch doesn't bother about the COIN variable at all.

This is my understanding from my experience of using it in past.

I will try to run it with latest version, tell you if its any different from past and update you.

Rig4p

Newbie

Offline

Activity: 59
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 10:10:47 PM

#6013

Quote from: damNmad on February 13, 2018, 09:59:27 PM

Quote from: Rig4p on February 13, 2018, 08:31:29 PM

Quote from: Rig4p on February 11, 2018, 11:57:02 PM

Quote

MPH usually takes 5-15 minutes to show worker and hashrate

You can use this to check your miner command :

Code:

ps ax | grep miner

This was the command I was looking for.
Unfortunately it is showing me that the miner never changes ports to match what the switcher says I am now mining.
It appears to be stuck on port 20570, ZCASH:

Code:

Actually I am trying Papampi's WTM switcher now. That's what my post above is about.
I had SALFTER's version running fine but was seeing no increase in coins vs. straight mining so I decided to try WTM instead.
The list above shows what the nvOC wtm-log shows as it switches.
So, many coin types have been "switched" to, but zero coins of those types have ever shown up in the balance sheet on MPH except for the one that appears locked.
Mining MPH_Equihash and MPH_Ethash both switched fine and mining single coins works fine.
Also, the reason I mention the COIN type changing in 1bash is I have peeked in 1bash after several supposedly coin switch (in the list) and COIN=xxxx has changed to the type now supposedly being mined.
Maybe my eyes are playing tricks on me.

To run WTM switcher the COIN= entry in 1bash does not need any special coin type, correct?
Thanks for looking at my question.

Robotixx

Newbie

Offline

Activity: 1
Merit: 0

Re: nvOC v0019-2.1 Community Release - Pre Release 1bash & 0miner

February 13, 2018, 11:15:20 PM

#6014

[/quote]

Thank you all for your offers, but nvOC is fully free OS and will stay that way.
There will be No dev fee ever.
You guys happiness and enjoyment is all we are looking for Wink

[/quote]

I just wanted to thank you and all the developers foir eveything you have done. I have been mining for just over a month now and I can't even begin to tell you how much I appreciate what you have done. THANKS!!!!!!

stef_stef

Full Member

Offline

Activity: 144
Merit: 100

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 13, 2018, 11:30:34 PM

#6015

Has anyone connected to supernova with username and password? I am struggling to mine ZEC/ZCL there.

If anyone can paste a template, I'd be really grateful.

Thanks!

urnzwy

Newbie

Offline

Activity: 44
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 14, 2018, 01:21:50 AM

#6016

I have two rigs both mining ZCL on Supernova and this has happened twice that both rigs will freeze within a minute of eachother. I saw the first time while being connected via teamviewer that the server "disconnects" briefly within the miner and that watchdog will then re-start the 3main, get hung up and freeze. I assume this is what happened again. I would point to a hardware issue, but both separately going down at the same time with no telegram errors? Too much of a coincidence. I don't have any of the cards overclocked at this point, both systems were up for almost two days before the last freeze.

This keeps happening over and over again. I am going to try a new mining pool, but I've liked SuperNova. I have zero issues with it on my personal desktop with two 1070 Ti's on windows and using Awesome Miner.

Any thoughts would be great.

urnzwy

Newbie

Offline

Activity: 44
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 14, 2018, 01:50:33 AM

#6017

Quote from: stef_stef on February 13, 2018, 11:30:34 PM

Has anyone connected to supernova with username and password? I am struggling to mine ZEC/ZCL there.

If anyone can paste a template, I'd be really grateful.

Thanks!

No need to enter the password in the 1Bash. I use x as the default password when I created my workers

ZCL_WORKER is your worker name you entered on SuperNova
ZCL_ADDRESS is your SuperNova username

# ZCL
ZCL_WORKER="XXX"
ZCL_ADDRESS="XXX"
ZCL_POOL="zcl.suprnova.cc"
ZCL_PORT="4042"

hashmasta83

Newbie

Offline

Activity: 28
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 14, 2018, 01:54:39 AM
Last edit: February 16, 2018, 10:40:47 PM by hashmasta83

#6018

I've noticed recently Verge (Lyra2rev2 algo) XVG coin shooting up to three times the profit of other coins on WTM auto switcher by papampi so i wanted to provide this short guide to add XVG coin to nvOC. I am using v0019-2.0, so i apologize if it's already included in the latest build.

Firstly, when you setup WTM you must uncheck the "Groestl" algo, as Verge coin allows for multiple algo mining. WTM will only report out current profits for Groestl algo and not Lyra2rev2, which we want to mine. If you don't uncheck Groestl algo, XVG coin will always be at the bottom of the WTM profit checking list and will never auto switch. Once you have your WTM configured correctly, hit calculate, and follow the instructions in 1bash to add it (add in .json after coins). Then add "XVG" to the list of coins for WTM to profit check.

Add "XVG" to list of coins for WTM to profit check (example below)

Code:

WTM_AUTO_SWITCH_COINS="ZEC;ZEN;ZCL;ETH;ETC;MONA;VTC;ZCOIN;BTG;FTC;XVG;XMR" ### coins to check profit or make the switch with format "ZEC;ETH;ETC;XMR"

Next add the following code to 1bash

Code:

# XVG ## No Need to add stratum+tcp:// to server address
XVG_WORKER="$WORKERNAME"
XVG_ADDRESS="stratdude83"
XVG_POOL="xvg-lyra.suprnova.cc"
XVG_PORT="2595"
XVG_INTENSITY="0"

Add "-o $COIN == XVG" to this portion of code if you are using algo specific OC settings (these are my settings for GTX 1070)

Code:

# lyra2vRev2
  if [ $COIN == "MONA" -o $COIN == "VTC" -o $COIN == "XVG" ]
  then
   ALGORITHM="LYRA2REV2"
   POWERLIMIT_WATTS=130
   __CORE_OVERCLOCK=125
   MEMORY_OVERCLOCK=600
  fi

Add the following code to 0miner

Code:

if [ $COIN == "XVG" ]
then
HCD='/home/m1/ASccminer/ccminer'
ADDR="$XVG_ADDRESS.$XVG_WORKER"
screen -dmSL miner $HCD -a lyra2v2 -o stratum+tcp://$XVG_POOL:$XVG_PORT -u $ADDR -p $MINER_PWD -i $XVG_INTENSITY
fi

I confirmed this works on Suprnova.

infowire

Newbie

Offline

Activity: 96
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 14, 2018, 02:23:57 AM
Last edit: February 14, 2018, 03:26:44 PM by infowire

#6019

Just wondering, could i run nvOC 24/7 ? I tried but thevar/logs gets full.... so made it delete itself but then / gets full in some cuda dir... only rebooting work with delete on boot. I am using v0019-2.0. Thanks

MedleyCoin

Newbie

Offline

Activity: 1
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

February 14, 2018, 06:00:38 AM

#6020

Quote from: farizfadzimi on February 13, 2018, 03:09:24 AM

Quote from: damNmad on February 13, 2018, 02:20:41 AM

Quote from: farizfadzimi on February 12, 2018, 11:08:54 PM

Quote from: papampi on February 11, 2018, 09:33:54 AM

Quote from: farizfadzimi on February 11, 2018, 08:41:48 AM

Code:

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

You can also restore default xorg.conf and xorg.conf.back by this code:

Code:

cdhome/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/restore_xorg.sh
bashhome/m1/Downloads/restore_xorg.sh

You can always find the default xorg.conf Here

I think you are in the right place and i believe that you don't need to edit 3main at all.

You need to follow the instructions provided by @papampi to get your xorg file back.

Quote from: papampi on February 11, 2018, 09:33:54 AM

Both your xorg.conf and its backup are corrupted, 3main tries to restore from backup but it fails too.

As soon as your rig started close gnome-terminal, then open guake with f12.

Run the suggested code and reboot see if it fix it or not.

Quote

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

You can also restore default xorg.conf and xorg.conf.back by this code:

Quote

cdhome/m1/Downloads
wget -N https://raw.githubusercontent.com/papampi/nvOC_by_fullzero_Community_Release/19-2.1/restore_xorg.sh
bashhome/m1/Downloads/restore_xorg.sh

Quote

sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration

Quote

nvidia-smi

It should give you a list of available GPU's like this :

Quote

If it did, then its fine. The above commands displays all the active GPU's.

There is also another option available in the 2.0 version, through which you can identify the GPU's.

Quote

~/nvOC gpuinfo

which will also lists your GPU's in this format

Quote

One more option to identify GPU's physically which gpu mapped to which number

Quote

~/nvOC gpumap

It will run the fans to 100%, that way you can identify which GPU is mapped to 0 and which GPU is mapped to 1 etc.

Hope it answers all of your questions. Good Luck.

Thank you so much for this.
But when the OS is booted up,
When the F12 for Quake Terminal pops up,
nothing happens.

But its alright.
Thank you so much.
I'll try again.

When i ran into the xorg reboot loop it was because bios was set to boot using integrated video card on motherboard. I changed that setting to pcie1 and the loop stopped and xorg was restored from backup and miner has run like a champ ever since.

Pages: « 1 ... 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 [301] 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 »

Page 300

Viewing Page: 301