Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.330)

Author

Topic: [ mining os ] nvoc (Read 418569 times)

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 03:22:47 PM

#6581

On Windows 7, write the image via HDDrawcopy on another disk then connect to my RIG, then copy my 1bash currently used on the 19.2.0 via another profile in the terminal
1st test:
1 My 1bash was not copied to the system at first boot
2 The autoexpand was not done at the first boot
3 The second boot did not start the system
4 The 3rd boot shows me unrecoverable file system error

Code:

nvOC v0019-2.1 - Community Release

nvOC v0019-2.1 - Community Release

Cannot make directory '/var/run/screen': Permission denied

rig IP: 192.168.1.144

rig MAC: b8:97:5a:f7:33:9e

01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

Sat Jun 23 05:41:31 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 390.67 Driver Version: 390.67 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 Off | 00000000:01:00.0 On | N/A |
| 0% 51C P8 9W 151W | 125MiB 8119MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 106... Off | 00000000:02:00.0 Off | N/A |
| 37% 51C P8 8W 180W | 9MiB 6078MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 106... Off | 00000000:03:00.0 Off | N/A |
| 25% 45C P8 10W 180W | 9MiB 6078MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 Off | 00000000:05:00.0 Off | N/A |
| 0% 47C P8 6W 151W | 9MiB 8119MiB | 2% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 106... Off | 00000000:06:00.0 Off | N/A |
| 38% 53C P8 7W 180W | 9MiB 6078MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 1070 Off | 00000000:07:00.0 Off | N/A |
| 0% 44C P8 5W 151W | 9MiB 8119MiB | 1% Default |
+-------------------------------+----------------------+----------------------+
| 6 GeForce GTX 1070 Off | 00000000:08:00.0 Off | N/A |
| 0% 50C P8 7W 151W | 9MiB 8119MiB | 2% Default |
+-------------------------------+----------------------+----------------------+
| 7 GeForce GTX 106... Off | 00000000:09:00.0 Off | N/A |
| 27% 46C P8 6W 180W | 9MiB 6078MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 8 GeForce GTX 106... Off | 00000000:0A:00.0 Off | N/A |
| 33% 50C P8 6W 180W | 9MiB 6078MiB | 3% Default |
+-------------------------------+----------------------+----------------------+
| 9 GeForce GTX 1070 Off | 00000000:0B:00.0 Off | N/A |
| 0% 47C P8 6W 151W | 9MiB 8119MiB | 2% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1276 G /usr/lib/xorg/Xorg 94MiB |
| 0 2072 G compiz 28MiB |
| 1 1276 G /usr/lib/xorg/Xorg 6MiB |
| 2 1276 G /usr/lib/xorg/Xorg 6MiB |
| 3 1276 G /usr/lib/xorg/Xorg 6MiB |
| 4 1276 G /usr/lib/xorg/Xorg 6MiB |
| 5 1276 G /usr/lib/xorg/Xorg 6MiB |
| 6 1276 G /usr/lib/xorg/Xorg 6MiB |
| 7 1276 G /usr/lib/xorg/Xorg 6MiB |
| 8 1276 G /usr/lib/xorg/Xorg 6MiB |
| 9 1276 G /usr/lib/xorg/Xorg 6MiB |
+-----------------------------------------------------------------------------+

Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 100.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 100.

Power limit for GPU 00000000:01:00.0 was set to 75.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

Provided power limit 75.00 W is not a valid power limit which should be between 90.00 W and 200.00 W for GPU 00000000:02:00.0
Terminating early due to previous errors.

LAUNCHING: MINER TEMPCONTROL
Cannot make directory '/var/run/screen': Permission denied

process in screen temp, guake terminal Tab (f12), 'nvOC temp-log'

Auto Start Miner is set to NO

Miner is not starting

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:0]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:0]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:1]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:1]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:2]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:2]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:3]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:3]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:4]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:4]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:5]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:5]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:6]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:6]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:8]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:8]) assigned value 100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 100.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 100.

2nd test:
On Windows 7, write the image via HDDrawcopy on another disk then connect to my RIG, then copy my 1bash currently used on the 19.2.0 via another profile in the terminal:

1 the system booted correctly and executed the first boot script successfully. The autoexpand ran correctly and my 1 bash was copied, then the system rebooted
2 the script 3main read some variables of my 1 bash but does not seem able to determine which coin algorithm it should use
3 The 3main script prevented the watchdog script from starting and he refused to start the minning. the system remained started, the tabs in guakes are started but nothing happens.

Code:

nvOC v0019-2.1 - Community Release

nvOC v0019-2.1 - Community Release

No Sockets found invar/run/screen/S-m1.

rig IP: 192.168.1.144

rig MAC: b8:97:5a:f7:33:9e

01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

Sat Jun 23 06:08:35 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 390.67 Driver Version: 390.67 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 Off | 00000000:01:00.0 On | N/A |
| 0% 48C P8 8W 151W | 124MiB 8119MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 106... Off | 00000000:02:00.0 Off | N/A |
| 0% 36C P8 6W 180W | 9MiB 6078MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 106... Off | 00000000:03:00.0 Off | N/A |
| 0% 37C P8 10W 180W | 9MiB 6078MiB | 4% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 Off | 00000000:05:00.0 Off | N/A |
| 0% 34C P8 5W 151W | 9MiB 8119MiB | 2% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 106... Off | 00000000:06:00.0 Off | N/A |
| 0% 37C P8 7W 180W | 9MiB 6078MiB | 1% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 1070 Off | 00000000:07:00.0 Off | N/A |
| 0% 37C P8 5W 151W | 9MiB 8119MiB | 1% Default |
+-------------------------------+----------------------+----------------------+
| 6 GeForce GTX 1070 Off | 00000000:08:00.0 Off | N/A |
| 0% 40C P8 6W 151W | 9MiB 8119MiB | 1% Default |
+-------------------------------+----------------------+----------------------+
| 7 GeForce GTX 106... Off | 00000000:09:00.0 Off | N/A |
| 0% 34C P8 6W 180W | 9MiB 6078MiB | 2% Default |
+-------------------------------+----------------------+----------------------+
| 8 GeForce GTX 106... Off | 00000000:0A:00.0 Off | N/A |
| 0% 35C P8 6W 180W | 9MiB 6078MiB | 1% Default |
+-------------------------------+----------------------+----------------------+
| 9 GeForce GTX 1070 Off | 00000000:0B:00.0 Off | N/A |
| 0% 37C P8 5W 151W | 9MiB 8119MiB | 1% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1406 G /usr/lib/xorg/Xorg 93MiB |
| 0 2147 G compiz 28MiB |
| 1 1406 G /usr/lib/xorg/Xorg 6MiB |
| 2 1406 G /usr/lib/xorg/Xorg 6MiB |
| 3 1406 G /usr/lib/xorg/Xorg 6MiB |
| 4 1406 G /usr/lib/xorg/Xorg 6MiB |
| 5 1406 G /usr/lib/xorg/Xorg 6MiB |
| 6 1406 G /usr/lib/xorg/Xorg 6MiB |
| 7 1406 G /usr/lib/xorg/Xorg 6MiB |
| 8 1406 G /usr/lib/xorg/Xorg 6MiB |
| 9 1406 G /usr/lib/xorg/Xorg 6MiB |
+-----------------------------------------------------------------------------+

Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0.
Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0.

Power limit for GPU 00000000:01:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:02:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:03:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:05:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:06:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:07:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:08:00.0 was set to 100.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:09:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:0A:00.0 was set to 114.00 W from 180.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.
Power limit for GPU 00000000:0B:00.0 was set to 114.00 W from 151.00 W.

Warning: persistence mode is disabled on this device. This settings will go back to default as soon as driver unloads (e.g. last application like nvidia-smi or cuda application terminates). Run with [--help | -h] switch to get more information on how to enable persistence mode.

All done.

LAUNCHING: MINER TEMPCONTROL

process in screen temp, guake terminal Tab (f12), 'nvOC temp-log'

LAUNCHING: WTM AUTO SWITCH

process in screen wtm, guake terminal Tab (f12)
Auto Start Miner Set to YES

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:0]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:0]) assigned value 1200.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:1]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:1]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:2]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:2]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:3]) assigned value 105.

LAUNCHING: MINER WATCHDOG (LOCAL)

process in screen wdog, guake terminal Tab (f12), 'nvOC wdog-log'
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:3]) assigned value 1200.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:4]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:4]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:5]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:5]) assigned value 1150.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:6]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:6]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:8]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:8]) assigned value 1100.

[WARNING] - Attempting to launch miner for an undefined algo

LAUNCHING: MINER

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 105.

COIN/ALGO not found, Check your settings
Miner not started, Stopping watchdog

Miner output: ./nvOC miner-log

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 1250.

3rd test
On Windows 7, write the image via HDDrawcopy on another disk then connect to my RIG, then change the 1bash testing 19-2.1beta1 to match it provided with the image:
1 The first automated steps mentioned above take place properly, even if the machian restarts
2 After restarting, 3main starts the mining on FTC, then turns in loop, then I replace FTC by KMD by hand in the 1bash, and 3main launches well DSTM on KMD
3 WTM_SWITCHING tells me that the corner to mine is ETH! so there is a pb with WTM_SWITCHING
4 Minerinfo works (but I will change the colors at my convenience later)

4th test
1 Minning in FTC Manual: Does not work
2 I kill all the screens (pkill -f screen) and I run the command in ssh via putty:
I get:

Code:

/home/m1/NVOC/mining/miners/KTccminer/ccminer -a neoscrypt -o stratum+tcp://hub.miningpoolhub.com:20510 -u cryptatometrader44.ATOMICMINER44 -p x -i 17
ccminer 8.20-KlausT (64bit) for nVidia GPUs
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 8.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

Illegal instruction

I guess the software is to recompile, so I restart the KTccminer compilation via the papampi script: ./NVOC/mining/miners/nvOC_miner_update.sh
Alas, the compilation script in the new image does not work!

Code:

bn.h openssl fixed for compiling miners

Select miners to compile (multiple comma separated values: 1,6,7)
1 - ASccminer
2 - KTccminer
3 - KTccminer-cryptonight
4 - KXccminer
5 - NAccminer
6 - SPccminer
7 - TPccminer
8 - vertminer
9 - ANXccminer
R - MSFTccminer (RVN)
X - xmr-stak

Do your Choice: [A]LL [1] [2] [3] [4] [5] [6] [7] [8] [9] [R] [X] [E]xit: 2
2
Compiling KlausT ccminer
This could take a while ...
fatal: Not a git repository (or any of the parent directories): .git
./NVOC/mining/miners/nvOC_miner_update.sh: line 404: cd:home/m1/KTccminer/src: No such file or directory
bash:home/m1/KTccminer/src/autogen.sh: No such file or directory
bash:home/m1/KTccminer/src/configure: No such file or directory
bash:home/m1/KTccminer/src/build.sh: No such file or directory
cp: cannot stat '/home/m1/KTccminer/src/ccminer': No such file or directory

Finished compiling KlausT ccminer
Restart miner

I manually start the compilation in the KTccminer software folders:

Code:

m1@m1-desktop:~/NVOC/mining/miners$ ls KTccminer
ccminer KTccminer.tar.xz src version
m1@m1-desktop:~/NVOC/mining/miners$ ls
ANXccminer ethminer NAccminer TPccminer
ASccminer KTccminer nvOC_miner_update.sh vertminer
bminer KTccminer-cryptonight README.md xmr-stak
claymore KXccminer SILENTminer ZENEMYminer
dstm MSFTccminer SPccminer
m1@m1-desktop:~/NVOC/mining/miners$ cd KTccminer
m1@m1-desktop:~/NVOC/mining/miners/KTccminer$ ls
ccminer KTccminer.tar.xz src version
m1@m1-desktop:~/NVOC/mining/miners/KTccminer$ cd src/
m1@m1-desktop:~/NVOC/mining/miners/KTccminer/src$ ls
m1@m1-desktop:~/NVOC/mining/miners/KTccminer/src$

Alas, again, as I had already reported in one of my previous posts, the sources are not available on the RIG!
Yet at the launch of the software update script minning, he did check between the repository and those present on the RIG. Which in my opinion means that the sources of the software provided in the update script are corrupt, missing or missing.
I therefore insist once again that the recompilation of some minning software is systematic or mandatory. Especially that of KLAUST for neoscrypt

I had to make a

Code:

chmod a + x nvOC

inhome/m1/NVOC/minning
to mail you this report. And I see that the tool has expanded other functions that I did not know before this beta2.

Code:

Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.1 - Community Release
nvOC (3main) : nvOC v0019-2.1 - Community Release
1bash ver : v0019-2.1.0026
3main ver : v0019-2.1.0022
5watchdog ver : v0019-2.0.018
6tempcontrol v: v0019-2.1.0006
wtm switch ver: v0019-2.0.0021
Kernel : 4.4.0-128-generic
OS : Ubuntu 16.04.4 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.9)
nvidia driver : 390.67

Hardware info:
Motherboard : BIOSTAR Group TB250-BTC PRO
BIOS ver. : 5.12 06/07/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 4011868 kB
Mem Free : 2351776 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 465.8G disk 1 1 usb ATA WDC WD500 1A01
├─sda1 9M vfat part 1 1 /media/m1/12D
└─sda2 465.8G ext4 part 1 1 /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.1.0026
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO

Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 15
GPU Utilization Threshold .: 70
Alternate Pool ............: NO

Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 70
__FAN_ADJUST ..............: 3
POWER_ADJUST ..............: 3
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 55
MAXIMAL_FAN_SPEED .........: 100

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO

POWERLIMIT MODE ...........: GPU_SPECIFIC
GPU0 Power Limit ..........: 114
GPU1 Power Limit ..........: 114
GPU2 Power Limit ..........: 114
GPU3 Power Limit ..........: 114
GPU4 Power Limit ..........: 114
GPU5 Power Limit ..........: 114
GPU6 Power Limit ..........: 100
GPU7 Power Limit ..........: 114
GPU8 Power Limit ..........: 114
GPU9 Power Limit ..........: 114
OVERCLOCK MODE ............: GPU_SPECIFIC
GPU0 Core Overclock ........: 105
GPU0 Memory Overclock ......: 1200
GPU1 Core Overclock ........: 105
GPU1 Memory Overclock ......: 1100
GPU2 Core Overclock ........: 105
GPU2 Memory Overclock ......: 1100
GPU3 Core Overclock ........: 105
GPU3 Memory Overclock ......: 1200
GPU4 Core Overclock ........: 105
GPU4 Memory Overclock ......: 1100
GPU5 Core Overclock ........: 105
GPU5 Memory Overclock ......: 1150
GPU6 Core Overclock ........: 105
GPU6 Memory Overclock ......: 1100
GPU7 Core Overclock ........: 105
GPU7 Memory Overclock ......: 1100
GPU8 Core Overclock ........: 105
GPU8 Memory Overclock ......: 1100
GPU9 Core Overclock ........: 105
GPU9 Memory Overclock ......: 1250

GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: ATOMICMINER44
plusCPU ...................: NO

COIN ......................: FTC
ALGO ......................: NEOSCRYPT
MINER .....................: KTccminer
FTC WORKER ................: ATOMICMINER44
FTC ADDRESS ...............: cryptato...
FTC POOL ..................: hub.miningpoolhub.com
FTC PORT ..................: 20510
NEOSCRYPT INTENSITY ..........: 17

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 03:54:48 PM

#6582

I think there is a problem with nvOC_miner_update.sh because i can see some forlders that shouldn't be here

Code:

m1@m1-desktop:~$ pwd
/home/m1
m1@m1-desktop:~$ ls
2unix~ Desktop KTccminer-cryptonight SILENTminer xmr-stak
ANXccminer Downloads KXccminer SPccminer ZENEMYminer
ASccminer dstm MSFTccminer TPccminer
backups ethminer NAccminer Untitled Document
bminer gocode NVOC vertminer
claymore KTccminer nvoc_logs www

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 03:57:40 PM

#6583

5 New test on ETH with CLAYMORE miner (no 2nd coin, ETH only) by only changing COIN = ETH
5a/ Restart Xsever

Code:

m1@m1-desktop:~/NVOC/mining$ sudo service lightdm restart

Ok claymore starts normaly

Code:

SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal cryptatometrader44.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1

Miner output: ./nvOC miner-log

SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool europe.ethash-hub.miningpoolhub.com:20535 -ewal cryptatometrader44.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1
Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 1250.

��ͻ
� Claymore's Dual GPU Miner - v11.8 �
� ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK �
��ͼ

ETH: 1 pool is specified
Main Ethereum pool is europe.ethash-hub.miningpoolhub.com:20535
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 10
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 7:0:0)
GPU #6: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 8:0:0)
GPU #7: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 9:0:0)
GPU #8: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 10:0:0)
GPU #9: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 11:0:0)
Total cards: 10

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'europe.ethash-hub.miningpoolhub.com' <35.156.160.57> port 20535 (unsecure)
ETH: Stratum - Connected (europe.ethash-hub.miningpoolhub.com:20535) (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

Setting DAG epoch #194...
ETH: Authorized
Setting DAG epoch #194 for GPU8
Create GPU buffer for GPU8
Setting DAG epoch #194 for GPU9
Create GPU buffer for GPU9
Setting DAG epoch #194 for GPU0
Create GPU buffer for GPU0
Setting DAG epoch #194 for GPU2
Create GPU buffer for GPU2
Setting DAG epoch #194 for GPU3
Create GPU buffer for GPU3
Setting DAG epoch #194 for GPU1
Create GPU buffer for GPU1
Setting DAG epoch #194 for GPU7
Create GPU buffer for GPU7
Setting DAG epoch #194 for GPU6
Create GPU buffer for GPU6
Setting DAG epoch #194 for GPU5
Create GPU buffer for GPU5
Setting DAG epoch #194 for GPU4
Create GPU buffer for GPU4
GPU9 DAG creation time - 6875 ms
Setting DAG epoch #194 for GPU9 done
GPU3 DAG creation time - 6893 ms
Setting DAG epoch #194 for GPU3 done
GPU5 DAG creation time - 6936 ms
Setting DAG epoch #194 for GPU5 done
GPU6 DAG creation time - 6978 ms
Setting DAG epoch #194 for GPU6 done
GPU0 DAG creation time - 7034 ms
Setting DAG epoch #194 for GPU0 done
ETH: 06/23/18-17:28:32 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 155.634 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 31.309 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 31.259 Mh/s, GPU4 0.000 Mh/s, GPU5 31.067 Mh/s, GPU6 30.591 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 31.408 Mh/s
GPU8 DAG creation time - 9449 ms
Setting DAG epoch #194 for GPU8 done
GPU7 DAG creation time - 9444 ms
Setting DAG epoch #194 for GPU7 done
GPU2 DAG creation time - 10105 ms
Setting DAG epoch #194 for GPU2 done
GPU4 DAG creation time - 10106 ms
Setting DAG epoch #194 for GPU4 done
GPU1 DAG creation time - 10093 ms
Setting DAG epoch #194 for GPU1 done
ETH: 06/23/18-17:28:34 - SHARE FOUND - (GPU 8)
ETH: Share accepted (36 ms)!
GPU0 t=43C fan=55%, GPU1 t=41C fan=55%, GPU2 t=43C fan=55%, GPU3 t=37C fan=55%, GPU4 t=46C fan=55%, GPU5 t=42C fan=55%, GPU6 t=38C fan=55%, GPU7 t=41C fan=55%, GPU8 t=43C fan=55%, GPU9 t=38C fan=55%
ETH: 06/23/18-17:28:52 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.299 Mh/s, Total Shares: 1, Rejected: 0, Time: 00:00
ETH: GPU0 31.097 Mh/s, GPU1 19.156 Mh/s, GPU2 19.143 Mh/s, GPU3 31.249 Mh/s, GPU4 19.174 Mh/s, GPU5 31.012 Mh/s, GPU6 30.871 Mh/s, GPU7 23.064 Mh/s, GPU8 23.054 Mh/s, GPU9 31.480 Mh/s
ETH: 06/23/18-17:29:04 - SHARE FOUND - (GPU 0)
ETH: Share accepted (39 ms)!
ETH: 06/23/18-17:29:05 - SHARE FOUND - (GPU 4)
ETH: Share accepted (36 ms)!
GPU0 t=47C fan=55%, GPU1 t=47C fan=55%, GPU2 t=48C fan=55%, GPU3 t=43C fan=55%, GPU4 t=52C fan=55%, GPU5 t=46C fan=55%, GPU6 t=43C fan=55%, GPU7 t=46C fan=55%, GPU8 t=49C fan=55%, GPU9 t=44C fan=55%
ETH: 06/23/18-17:29:15 - SHARE FOUND - (GPU 8)
ETH: Share accepted (36 ms)!
ETH: 06/23/18-17:29:24 - SHARE FOUND - (GPU 2)
ETH: Share accepted (36 ms)!
ETH: 06/23/18-17:29:25 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 258.739 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 31.268 Mh/s, GPU1 19.172 Mh/s, GPU2 19.166 Mh/s, GPU3 31.080 Mh/s, GPU4 19.069 Mh/s, GPU5 31.010 Mh/s, GPU6 30.885 Mh/s, GPU7 23.035 Mh/s, GPU8 23.074 Mh/s, GPU9 30.979 Mh/s
ETH: 06/23/18-17:29:31 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.365 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 31.180 Mh/s, GPU1 19.206 Mh/s, GPU2 19.183 Mh/s, GPU3 31.221 Mh/s, GPU4 19.171 Mh/s, GPU5 31.059 Mh/s, GPU6 30.806 Mh/s, GPU7 23.035 Mh/s, GPU8 23.064 Mh/s, GPU9 31.440 Mh/s
GPU0 t=50C fan=55%, GPU1 t=52C fan=55%, GPU2 t=51C fan=55%, GPU3 t=47C fan=55%, GPU4 t=57C fan=55%, GPU5 t=49C fan=55%, GPU6 t=46C fan=55%, GPU7 t=50C fan=55%, GPU8 t=54C fan=55%, GPU9 t=47C fan=55%
ETH: 06/23/18-17:29:50 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.347 Mh/s, Total Shares: 5, Rejected: 0, Time: 00:01
ETH: GPU0 31.195 Mh/s, GPU1 19.179 Mh/s, GPU2 19.174 Mh/s, GPU3 31.264 Mh/s, GPU4 19.210 Mh/s, GPU5 30.987 Mh/s, GPU6 30.850 Mh/s, GPU7 23.049 Mh/s, GPU8 22.990 Mh/s, GPU9 31.449 Mh/s
ETH: 06/23/18-17:30:01 - SHARE FOUND - (GPU 2)
ETH: Share accepted (37 ms)!
ETH: 06/23/18-17:30:08 - SHARE FOUND - (GPU 8)
ETH: Share accepted (36 ms)!
GPU0 t=51C fan=55%, GPU1 t=56C fan=55%, GPU2 t=53C fan=55%, GPU3 t=50C fan=55%, GPU4 t=60C fan=55%, GPU5 t=51C fan=55%, GPU6 t=49C fan=55%, GPU7 t=53C fan=55%, GPU8 t=57C fan=55%, GPU9 t=50C fan=55%
ETH: 06/23/18-17:30:11 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 259.271 Mh/s, Total Shares: 7, Rejected: 0, Time: 00:01
ETH: GPU0 31.236 Mh/s, GPU1 19.194 Mh/s, GPU2 19.170 Mh/s, GPU3 31.195 Mh/s, GPU4 19.160 Mh/s, GPU5 31.013 Mh/s, GPU6 30.777 Mh/s, GPU7 23.017 Mh/s, GPU8 23.043 Mh/s, GPU9 31.466 Mh/s
ETH: 06/23/18-17:30:13 - SHARE FOUND - (GPU 5)
ETH: Share accepted (37 ms)!
ETH: 06/23/18-17:30:18 - New job from europe.ethash-hub.miningpoolhub.com:20535
ETH - Total Speed: 258.857 Mh/s, Total Shares: 8, Rejected: 0, Time: 00:01
ETH: GPU0 30.825 Mh/s, GPU1 19.205 Mh/s, GPU2 19.150 Mh/s, GPU3 31.249 Mh/s, GPU4 19.217 Mh/s, GPU5 31.055 Mh/s, GPU6 30.812 Mh/s, GPU7 23.063 Mh/s, GPU8 23.032 Mh/s, GPU9 31.250 Mh/s
ETH: 06/23/18-17:30:33 - New job from europe.ethash-hub.miningpoolhub.com:20535

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 04:01:15 PM

#6584

6 New test on ETH with the miner BMINER (no 2nd coin, ETH only) by modifying only the MINER = BMINER

Code:

service lightdm restart

Code:

SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:x@europe.ethash-hub.miningpoolhub.com:20535 -esm 2 -allpools 1 -allcoins 1 SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:x@europe.ethash-hub.miningpoolhub.com:20535 -esm 2 -allpools 1 -allcoins 1

Miner output: ./nvOC miner-log

SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:x@europe.ethash-hub.miningpoolhub.com:20535 -esm 2 -allpools 1 -allcoins 1 SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/bminer/latest/bminer -uri ethstratum://cryptatometrader44.ATOMICMINER44:x@europe.ethash-hub.miningpoolhub.com:20535 -esm 2 -allpools 1 -allcoins 1
Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:3]) assigned value 1200.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:4]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:4]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:5]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:5]) assigned value 1150.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:6]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:6]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:7]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:7]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:8]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:8]) assigned value 1100.

Attribute 'GPUGraphicsClockOffset' (m1-desktop:0[gpu:9]) assigned value 105.

Attribute 'GPUMemoryTransferRateOffset' (m1-desktop:0[gpu:9]) assigned value 1250.

flag provided but not defined: -esm
Bminer: When Crypto-mining Made Fast (v8.0.0-32928c5)

-api <host>:<port>
The endpoint (i.e., <host>:<port>) that bminer serves its REST API. The REST API is disabled if it is unspecified.
-devices comma-separated IDs
List of comma-separated IDs of the CUDA devices that Bminer should run on. By default bminer runs on all CUDA devices available on the system.
-dual-intensity int
The intensity of the secondary mining. Valid values are 0 to 300. Default is 0, which is to tune automatically.
-dual-subsolver int
The sub-solver for dual mining. Valid values are 0, 1, 2, 3. Default is -1, which is to tune automatically. (default -1)
-failover sameHost|immediateNext|random
Fail-over strategy between multiple pools. Bminer can retry the connection, failover to the next pool or a pool that is randomly chosen in the lists of available pools. (sameHost|immediateNext|random) (default "immediateNext")
-gpucheck uint
The interval in seconds that Bminer polls whether the CUDA devices have hung. Set to 0 to disable the checks. (default 90)
-logfile <path>
Append the logs to the file <path>.
-max-network-failures int
Number of consecutive attempts that Bminer tries to recover from network failures. Set to -1 to keep on recovering. (default -1)
-max-temperature int
Hard limits of the temperature of the GPUs. Bminer slows down itself when the temperautres of the devices exceed the limit. (default 85)
-no-runtime-info
Disable runtime information collection for Bminer.
-no-timestamps
Suppress timestamps in the logging messages.
-nofee
Disable the devfee but it also disables some optimizations.
-share-check uint
The interval of seconds that Bminer polls to ensure there are accepted shares. Set to 0 to disable the checks. (default 900)
-strict-secure
Verify the certificates of servers when connecting to a SSL-enabled Stratum server.
-uri <scheme>://<username>[:<password>]@<host>:<port>
A comma-seperated list of URIs that bminer should mine towards. It has the format of <scheme>://<username>[:<password>]@<host>:<port>. Please refer to https://www.bminer.me for the specification of the URIs.
-uri2 <scheme>://<username>[:<password>]@<host>:<port>
A comma-seperated list of URIs that bminer should mine towards secondarily. It has the format of <scheme>://<username>[:<password>]@<host>:<port>. Currently Bminer supports blake14r:// or blake2s:// as secondary for ETH mining. Please refer to https://www.bminer.me for the specification of the URIs.
-watchdog
Automatically restart to recover from hung GPUs. Bminer exits itself in case of errors if watchdog is disabled. (default true)

Theses options give me some erros because 3main or 0miner add them with Bminer !!!! Huh

Code:

ETH_EXTENSION_ARGUMENTS="" # add any additional Claymore miner arguments here

If i put them in

Code:

CLAYMORE_OPTS="-esm 2 -allpools 1 -allcoins 1" # Claymore optional arguments. EX: add "-esm 2" for miningpoolhub

at the begenning of 1bash file, there is no pb with BMINER on ETH only

LuKePicci

Jr. Member

Offline

Activity: 128
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 04:40:09 PM
Last edit: June 23, 2018, 04:54:47 PM by LuKePicci

#6585

Thank you for your extensive testing.
Future images will have a new firstboot management that will hopefully work better and support recompilation as well.

> 1st/2nd test
Regarding 1bash, 2.1 template is very different from the old 2.0 version, and any attempt to let nvOC run or import it automatically from the fat partition will lead to basically random errors. It is absolutely needed to update/match a new template with all your old config to get it working. For that reason only, your tests using the old 1bash wouldn't get you too far. Newer images will have a README in the small fat partition to help you download an updated (and working) template. Also, if 1bash version is older or mismatching with the expected one you will get an alert.

> 3rd/4th test
3main was looping while on FTC because its miner was not yet recompiled. For the same reason, as you pointed out, FTC manual mining was not functional.
On first launch, the default 1bash is configured to mine ETH, so it will start mining it. After a short while WTM_SWITCHING starts working and if the best coin to mine is different he will update 1bash and restart nvOC scripts to perform the switch.
Regarding the compilation of miners, seems that your miners (and parent) folder is somehow broken, as if it has not been initialized properly. Was the compiling error related to a custom terminal profile you created or with the image default one? Please cd to ~/NVOC/testing and post the output of

Code:

git status

> 5th/6th test
Don't mind the content of the home folder, there is some stuff from the old 2.0 version to allow testers have both old 2.0 and 2.1 available, will be cleaned up in future images. All 2.1 testing stuff is inside NVOC/testing (if pap actually used this path).
The commend near ETH_EXTENSION_ARGUMENTS is misleading, eth extension arguments apply anytime you mine eth, with any miner, not just for claymore. Will change it, thanks for pointing it out.

LuKePicci

Jr. Member

Offline

Activity: 128
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 05:23:24 PM

#6586

Quote from: CryptAtomeTrader44 on June 23, 2018, 12:28:21 AM

Quote from: LuKePicci on June 15, 2018, 10:31:17 AM

Quote from: CryptAtomeTrader44 on June 13, 2018, 10:44:37 PM

When do you plan to provide a new ISO file ? How much time testing ?

Thank you for all your feedbacks, please test again the miners update procedure, we did some chenges recently, in case of any issue with the testing version please report on github, to avoid confusing people here. As you see lot of things changed, and the testing stage is just at the beginning. The more people test the new beta version, the more we feel confident in declaring it as ready. Please remember to always attach a report anytime you report issues because the report contains version info needed to understand which test version you are running at that time.

A few pages ago, we had discussed updating to a newer version of ubuntu that was to be released last spring. What about these projects?

As I wrote, I think Xubuntu could do the trick and be a little lighter. I know that leenoox also wanted to propose many other systems even more minimalist but I do not know if he finally gave up his idea to lighten the image of nvOC.

A lot of work has been done to decople the whole nvOC thing, including miners and firstboot management from Ubuntu as a base OS. Now, if someone in this nice community would like to work on an image built on top of Xubuntu/Lubuntu or whatever is at least "doable" without taking care of patching nvOC scripts. All scripts are now portable enough, I think, the only work to do in case someone want to run it on a different OS is to install nvidia and motherboard support drivers, together with all kind of system optimizations he want. In other words, what @leenux was proposing is now an easy task to deal with, for anyone, BUT keep in mind that, as @leenux pointed out in this discussion on GitHub, it would be quite impossible for anybody here to be able to support you if you're using an image which is custom built by you.

Rev123

Newbie

Offline

Activity: 14
Merit: 0

Re: nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

June 23, 2018, 05:43:21 PM

#6587

Quote from: papampi on June 20, 2018, 06:39:24 AM

nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

Thanks to all contributors.

This is a beta image and not fully tested yet.
Please post bugs, errors,questions and any problems here in forum or GitHub issues.

nvOC_V19-2.1beta_U16.04_N390_D180619.img sha256:
cb607c8e028d3bc0a0e274c34b4e0def0c71330053f0c8328120a717e0029938

nvOC_V19-2.1beta_U16.04_N390_D180619.img.zip sha256:
7700dfdfc1cabab8a1dd9816a6322d6653c89943cb63afa59e79f88cfe14a6a9

Zip download size 3.6 Gb, Image size 9 Gb
Auto expand to fill all the volume at first boot.

Download link

Write the image with your favourite image writer of choice
Browse to the small fat partition you can see on the drive, edit 1bash.
Auto start miner is set to no, change it when you are sure all settings are correct.
Attach the SSD/USB/HDD to rig and boot up.
USB install not recommended for mining, only use it for testing.

Good luck.
Keep calm and carry on mining.

Hello.
Does the new version support Equihash 144.5 & 192.7? If not then when is planned? THX.

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

June 23, 2018, 06:08:52 PM

#6588

Quote from: Rev123 on June 23, 2018, 05:43:21 PM

Quote from: papampi on June 20, 2018, 06:39:24 AM

nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

Hello.
Does the new version support Equihash 144.5 & 192.7? If not then when is planned? THX.

What are you talking about Huh

I think i missed some informations about algo forks. Is it from bitmain equihash ASIC miners to make forks on equihash algos ?

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 06:20:06 PM

#6589

Quote from: LuKePicci on June 23, 2018, 05:23:24 PM

Quote from: CryptAtomeTrader44 on June 23, 2018, 12:28:21 AM

Quote from: LuKePicci on June 15, 2018, 10:31:17 AM

Quote from: CryptAtomeTrader44 on June 13, 2018, 10:44:37 PM

When do you plan to provide a new ISO file ? How much time testing ?

Thank you for all your answers LukePicci.

I've not finished all the tests on the new image nvOC 19-2.1. I have nice_ALGOS coin in WTM-switching to test.

I've not capacity to make mon own distro. I know that it could be more difficult to use if the system is not a large public adopted one.

ZEC was the Default coin i saw in 1bash in this ISO file

A few month ago, i post a message that evoke this portability, and finally, you, all scipters and devellopers, are very close to be able to make a sort of package ! Good jobs !

Result of command git status :

Code:

cd NVOC/mining/
m1@m1-desktop:~/NVOC/mining$ git status
On branch 19-2.1
Your branch is up-to-date with 'origin/19-2.1'.
Changes not staged for commit:
  (use "git add <file>..." to update what will be committed)
  (use "git checkout -- <file>..." to discard changes in working directory)
  (commit or discard the untracked or modified content in submodules)

   modified: 1bash
   modified: 3main
   modified: miners (new commits, untracked content)
   modified: nvOC
   modified: www/cgi-bin/minerinfo

Untracked files:
  (use "git add <file>..." to include in what will be committed)

   5_watchdoglog
   6_autotemplog
   Untitled Document
   WTM.json
   WTM_1.json
   WTM_24H_REV
   WTM_BTC_EXCHANGE_RATE
   WTM_current_profit
   WTM_current_revenue
   WTM_switch_history
   WTM_top_coin
   cpuOPT/
   firstBOOT

no changes added to commit (use "git add" and/or "git commit -a")

Rev123

Newbie

Offline

Activity: 14
Merit: 0

Re: nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

June 23, 2018, 06:34:27 PM

#6590

Quote from: CryptAtomeTrader44 on June 23, 2018, 06:08:52 PM

Quote from: Rev123 on June 23, 2018, 05:43:21 PM

Quote from: papampi on June 20, 2018, 06:39:24 AM

nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

Hello.
Does the new version support Equihash 144.5 & 192.7? If not then when is planned? THX.

What are you talking about Huh

I think i missed some informations about algo forks. Is it from bitmain equihash ASIC miners to make forks on equihash algos ?

Yeah, its new algos for ASIC resistance on Equihash. Now such coins as BTCZ, LTZ, SAFE are mined on this algo, then they will be joined by others.

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 06:51:59 PM

#6591

Code:

nvOC v0019-2.1 - Community Release

nvOC v0019-2.1 - Community Release

No Sockets found invar/run/screen/S-m1.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.

(guake:2379): libglade-WARNING **: unknown attribute `swapped' for <signal>.
INFO:guake.guake_app:Logging configuration complete
/usr/lib/python2.7/dist-packages/guake/guake_app.py:1785: GtkWarning: gtk_box_pack: assertion 'child->parent == NULL' failed
  self.mainframe.pack_start(self.notebook, expand=True, fill=True, padding=0)

** (guake:2379): WARNING **: Binding 'F12' failed!
^CTraceback (most recent call last):
  File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
   "__main__", fname, loader, pkg_name)
  File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
   exec code in run_globals
  File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in <module>
   exec_main()
  File "/usr/lib/python2.7/dist-packages/guake/main.py", line 236, in exec_main
   gtk.main()

I already had this mistake of guake a few months ago, at the time I had solved the problems by doing an update.

I thought it worth/merit to be reported

EDIT : It seems that this error don't stop the scritps after 3main, but i've not all tabs in guake terminal if i press F12

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 06:53:51 PM

#6592

Code:

Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.1 - Community Release
nvOC (3main) : nvOC v0019-2.1 - Community Release
1bash ver : v0019-2.1.0026
3main ver : v0019-2.1.0022
5watchdog ver : v0019-2.0.018
6tempcontrol v: v0019-2.1.0006
wtm switch ver: v0019-2.0.0021
Kernel : 4.4.0-128-generic
OS : Ubuntu 16.04.4 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.9)
nvidia driver : 390.67

Hardware info:
Motherboard : BIOSTAR Group TB250-BTC PRO
BIOS ver. : 5.12 06/07/2017
CPU Model : Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 4011868 kB
Mem Free : 1394544 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)

HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 465.8G disk 1 1 usb ATA WDC WD5000LPCX-2 1A01
├─sda1 9M vfat part 1 1 /media/m1/12D3-A869
└─sda2 465.8G ext4 part 1 1 /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.1.0026
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: NO
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO

Watchdog ..................: YES
SYSRQ Reboot ..............: YES
Watchdog Cycle ............: 15
GPU Utilization Threshold .: 70
Alternate Pool ............: NO

Temp Control ..............: YES
MANUAL_FAN ................: NO
TARGET_TEMP ...............: 70
__FAN_ADJUST ..............: 3
POWER_ADJUST ..............: 3
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 85
MINIMAL_FAN_SPEED .........: 55
MAXIMAL_FAN_SPEED .........: 100

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: YES
TELEGRAM_ALERTS ...: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

HEADLESS MODE:.............: NO
GPUPowerMizerMode_Adjust...: NO
ETH Pill ..................: NO

POWERLIMIT MODE ...........: GPU_SPECIFIC
GPU0 Power Limit ..........: 116
GPU1 Power Limit ..........: 116
GPU2 Power Limit ..........: 116
GPU3 Power Limit ..........: 116
GPU4 Power Limit ..........: 116
GPU5 Power Limit ..........: 116
GPU6 Power Limit ..........: 100
GPU7 Power Limit ..........: 116
GPU8 Power Limit ..........: 116
GPU9 Power Limit ..........: 116
OVERCLOCK MODE ............: GPU_SPECIFIC
GPU0 Core Overclock ........: 110
GPU0 Memory Overclock ......: 1150
GPU1 Core Overclock ........: 110
GPU1 Memory Overclock ......: 1150
GPU2 Core Overclock ........: 110
GPU2 Memory Overclock ......: 1150
GPU3 Core Overclock ........: 110
GPU3 Memory Overclock ......: 1100
GPU4 Core Overclock ........: 110
GPU4 Memory Overclock ......: 1100
GPU5 Core Overclock ........: 110
GPU5 Memory Overclock ......: 1150
GPU6 Core Overclock ........: 110
GPU6 Memory Overclock ......: 1100
GPU7 Core Overclock ........: 110
GPU7 Memory Overclock ......: 1400
GPU8 Core Overclock ........: 110
GPU8 Memory Overclock ......: 1400
GPU9 Core Overclock ........: 110
GPU9 Memory Overclock ......: 1500

GLOBAL WORKERNAME .........: YES
AUTO WORKERNAME ...........: CUSTOM
WORKERNAME ................: ATOMICMINER44
plusCPU ...................: NO

COIN ......................: NICE_ETHASH
ALGO ......................: ETHASH
MINER .....................: CLAYMORE
NICE_ETHASH WORKER ................: ATOMICMINER44
NICE_ETHASH ADDRESS ...............: ...
NICE_ETHASH POOL ..................: daggerhashimoto.usa.nicehash.com
NICE_ETHASH PORT ..................: 3353
ETHASH INTENSITY ..........:

I have errors with NICE_ETHAH using Claymore :

Code:

SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool daggerhashimoto.usa.nicehash.com:3353 -ewal 3NnQB7tEeJhLVdgydP9zgkxwPgGQYUqYvE.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1 SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool daggerhashimoto.usa.nicehash.com:3353 -ewal 3NnQB7tEeJhLVdgydP9zgkxwPgGQYUqYvE.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ͻ
▒ Claymore's Dual GPU Miner - v11.8 ▒
▒ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ͼ

ETH: 1 pool is specified
Main Ethereum pool is daggerhashimoto.usa.nicehash.com:3353
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 10
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 7:0:0)
GPU #6: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 8:0:0)
GPU #7: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 9:0:0)
GPU #8: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 10:0:0)
GPU #9: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 11:0:0)
Total cards: 10

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'daggerhashimoto.usa.nicehash.com' <169.62.79.78> port 3353 (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - Connected (daggerhashimoto.usa.nicehash.com:3353) (unsecure)
ETH: Authorized
cannot convert blob3 data
cannot convert blob3 data
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=35C fan=55%, GPU1 t=40C fan=55%, GPU2 t=36C fan=55%, GPU3 t=32C fan=55%, GPU4 t=44C fan=55%, GPU5 t=34C fan=55%, GPU6 t=35C fan=55%, GPU7 t=35C fan=55%, GPU8 t=39C fan=55%, GPU9 t=33C fan=55%
SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool daggerhashimoto.usa.nicehash.com:3353 -ewal 3NnQB7tEeJhLVdgydP9zgkxwPgGQYUqYvE.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1 SCREEN -chome/m1/NVOC/mining/screenrc-miner -dmSL minerhome/m1/NVOC/mining/miners/claymore/latest/ethdcrminer64 -epool daggerhashimoto.usa.nicehash.com:3353 -ewal 3NnQB7tEeJhLVdgydP9zgkxwPgGQYUqYvE.ATOMICMINER44 -epsw x -mode 1 -dbg -1 -esm 2 -allpools 1 -allcoins 1

▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ͻ
▒ Claymore's Dual GPU Miner - v11.8 ▒
▒ ETH + DCR/SIA/LBC/PASC/BLAKE2S/KECCAK ▒
▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ͼ

ETH: 1 pool is specified
Main Ethereum pool is daggerhashimoto.usa.nicehash.com:3353
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool, "x" to select GPU
CUDA initializing...

NVIDIA Cards available: 10
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 1:0:0)
GPU #1: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 2:0:0)
GPU #2: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 3:0:0)
GPU #3: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 5:0:0)
GPU #4: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 6:0:0)
GPU #5: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 7:0:0)
GPU #6: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 8:0:0)
GPU #7: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 9:0:0)
GPU #8: GeForce GTX 1060 6GB, 6078 MB available, 10 compute units, capability: 6.1 (pci bus 10:0:0)
GPU #9: GeForce GTX 1070, 8119 MB available, 15 compute units, capability: 6.1 (pci bus 11:0:0)
Total cards: 10

You can use "+" and "-" keys to achieve best ETH speed, see "FINE TUNING" section in Readme for details.

ETH: Stratum - connecting to 'daggerhashimoto.usa.nicehash.com' <169.62.79.78> port 3353 (unsecure)
ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
ETH: miner-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

ETH: Stratum - Connected (daggerhashimoto.usa.nicehash.com:3353) (unsecure)
ETH: Authorized
cannot convert blob3 data
cannot convert blob3 data
ETH: Job timeout, disconnect, retry in 20 sec...
GPU0 t=34C fan=55%, GPU1 t=39C fan=55%, GPU2 t=36C fan=55%, GPU3 t=32C fan=55%, GPU4 t=42C fan=55%, GPU5 t=33C fan=55%, GPU6 t=35C fan=55%, GPU7 t=34C fan=55%, GPU8 t=38C fan=55%, GPU9 t=33C fan=55%
ETH: Stratum - connecting to 'daggerhashimoto.usa.nicehash.com' <169.62.79.78> port 3353 (unsecure)
ETH: Stratum - Connected (daggerhashimoto.usa.nicehash.com:3353) (unsecure)
ETH: Authorized
cannot convert blob3 data

LuKePicci

Jr. Member

Offline

Activity: 128
Merit: 1

Re: nvOC 19-2.1 beta image, Ubuntu 16.04, Nvidia 390, Date 180619

June 23, 2018, 07:46:26 PM

#6593

Quote from: Rev123 on June 23, 2018, 05:43:21 PM

Hello.
Does the new version support Equihash 144.5 & 192.7? If not then when is planned? THX.

I've created a new issue for that on the nvOC_miners repo
(https://github.com/papampi/nvOC_miners/issues/9)

It will probably get support in time for the upcoming network update of BTG.

LuKePicci

Jr. Member

Offline

Activity: 128
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 07:58:15 PM

#6594

Quote from: CryptAtomeTrader44 on June 23, 2018, 06:20:06 PM

Result of command git status :

Code:

Ok, so your main tree is fine. Please, repeat the same command but this time from inside the 'NVOC/testing/miners' folder. Let's see what is wrong there.

(EDIT: Just a quick info: was NVOC/testing/miners your current directory when you launched the nvOC_miner_update.sh script? )

The error with guake usually happens when another instance of guake is still running in the background. Either a reboot or a logout/login cycle should solve.

About the NICE_ETHASH with Claymore you need to wait for @papampi to take a look.

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 09:53:46 PM

#6595

Quote from: LuKePicci on June 23, 2018, 07:58:15 PM

Ok, so your main tree is fine. Please, repeat the same command but this time from inside the 'NVOC/testing/miners' folder. Let's see what is wrong there.

My current directory was

Code:

m1@m1-desktop:~$ cd NVOC/mining/miners/
m1@m1-desktop:~/NVOC/mining/miners$ ls
ANXccminer bminer dstm KTccminer KXccminer NAccminer README.md SPccminer vertminer ZENEMYminer
ASccminer claymore ethminer KTccminer-cryptonight MSFTccminer nvOC_miner_update.sh SILENTminer TPccminer xmr-stak

Quote from: LuKePicci on June 23, 2018, 07:58:15 PM

(EDIT: Just a quick info: was NVOC/testing/miners your current directory when you launched the nvOC_miner_update.sh script? )

I've not testing dierctory in NVOC directory. I think this is the pb of "nvOC_miner_update.sh" script in the new image file posted by papampi on mega/nz last day.
NVOC/testing/miners was the directory when i used beta1 of nvOC 19-2.1, but i'm using the new complete image file recently posted by papampi that have a different tree structure.
before this day, i used terminal profile for testing on 19-2.0 nvOC, but this is no longer the case. I hope i'm clear and understandable because my english and that of translator looks bad.

Quote from: LuKePicci on June 23, 2018, 07:58:15 PM

The error with guake usually happens when another instance of guake is still running in the background. Either a reboot or a logout/login cycle should solve.

Well, precisely, it appears when i retart miner, never when i use "sudo service lightdm restart" command

Quote from: LuKePicci on June 23, 2018, 07:58:15 PM

About the NICE_ETHASH with Claymore you need to wait for @papampi to take a look.

Ok, but i'm not sure that papampi can easily correct this problem because his country have banned nicehash in their great firewall in Iran...
I think the problem is because of esm 3 instead of -esm2 for MPH. I think we need a more variable like ETH_EXTENSION_ARGUMENTS="" but for nicehash_ETH.
Something like that :
#NICE_ETHASH_ARGUMENTS="" # add any additional Claymore miner arguments here

But, i saw he unified all algo commands lines in 0miner file. So, it' possibly more complicated to make...Idon't know.

I'll be content with Bminer for now.
I note for about an hour that the temperature acts greatly on the stability of my RIG. In the evening, open window, it is more stable than the rest of the day.

LuKePicci

Jr. Member

Offline

Activity: 128
Merit: 1

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 23, 2018, 11:58:41 PM
Last edit: June 24, 2018, 12:11:42 AM by LuKePicci

#6596

Quote from: CryptAtomeTrader44 on June 23, 2018, 09:53:46 PM

I'm not sure what papampi left in the home folder of the full beta testing image, but I'm pretty confident it has the same suggested structure for side-by-side testing proposed before in the beta testing guide for existing 2.0 images but the default directory is "NVOC/mining" instead of "NVOC/testing". Basically this beta image should be a 2.0 image with beta testing environment already set up, if I understand correctly. All the new stuff should still be underhome/m1/NVOC/. BTW a new image without the old legacy code will come, but if you would like to keep the chance of quickly rolling back to 2.0 I think either the manual installation guide of testing env or this 2.1 beta testing image is fine as long as its content is updated the same way by version control.

Quote from: CryptAtomeTrader44 on June 23, 2018, 09:53:46 PM

Uhm, I'm quite confident that if you add at line 955 of 1bash v0019-2.1.0028:

Code:

NICE_ETHASH_EXTENSION_ARGUMENTS=""

it will work.

Edit: just noticed @pap has already added all of them in latest 1bash v0019-2.1.0029 some hours ago.

papampi

Full Member

Offline

Activity: 686
Merit: 140

Linux FOREVER! Resistance is futile!!!

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 24, 2018, 08:27:18 AM

#6597

Quote from: CryptAtomeTrader44 on June 23, 2018, 03:54:48 PM

I think there is a problem with nvOC_miner_update.sh because i can see some forlders that shouldn't be here

Code:

I think you run the 19-2.0 miner update script in 19-2.1 and it created those folders inhome/m1/
You should do this in 19-2.1

Code:

cdhome/m1/NVOC/mining
git submodule update --init --depth 1 --remote miners
cdhome/m1/NVOC/mining/miners
bash nvOC_miner_update.sh

nvOC - Community Release - free-easy-to-use Nvidia Mining OS
nvOC - Community Release - GitHub
فروش پیچ و مهره

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 24, 2018, 01:46:36 PM

#6598

Is it possible to put theses parameters to mine ETHAHS et EQUIHASh with the same miner [BMINER] alternatively ?

I think it's not possible because i tried, and i recieved some messages that indicate the miner bminer can't interpret the equihash "shares" correctly

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 24, 2018, 01:58:57 PM

#6599

Quote from: LuKePicci on June 23, 2018, 11:58:41 PM

I used another USB disk for theses tests. So if i want to come back to 19.2.0, i can easily and rapidly. BTW, my 19.2.0 disk also have testing scripts. So, i can say i définitly upgrade version

Quote from: LuKePicci on June 23, 2018, 11:58:41 PM

Uhm, I'm quite confident that if you add at line 955 of 1bash v0019-2.1.0028:

Code:

NICE_ETHASH_EXTENSION_ARGUMENTS=""

it will work.

Edit: just noticed @pap has already added all of them in latest 1bash v0019-2.1.0029 some hours ago.

yes i saw new 1bash.template too on github

I will test again all theses updates newt week end. Now i try to stabilize my RIG in ETH mining with Bminer

CryptAtomeTrader44

Full Member

Offline

Activity: 340
Merit: 103

It is easier to break an atom than partialities AE

Re: [OS] nvOC easy-to-use Linux Nvidia Mining vBASIC || Community Edition 2.0

June 24, 2018, 02:21:38 PM

#6600

Quote from: papampi on June 24, 2018, 08:27:18 AM

I think you run the 19-2.0 miner update script in 19-2.1 and it created those folders inhome/m1/
You should do this in 19-2.1

Code:

cdhome/m1/NVOC/mining
git submodule update --init --depth 1 --remote miners
cdhome/m1/NVOC/mining/miners
bash nvOC_miner_update.sh

Ok, it's also what I thought, but i can affirm you that this script i execute inhome/m1/NVOC/mining/miners was the script in your new image file of 19.2.1 for testings. I never upload this script in my new system disk.

Finally, i had deleted all miners folders inhome/m1/. BTW, They were empty.

I've not tested TPccmioner, but i remember that last time, when i used terminal profile for testings, i had this problem of several miners software that i use.
I know it take more time to use and mine, but i say again, that some miners have to be recompiled before lauching mining.
I'm actuelly using theses miners sofwares: KTccminer, NAccminer, TPccminer, Bminer, DSTM, Claymore, xmr-stak (sometimes). In this list, i think it's necesary to recompile 3 first softwares.

I tried to recompile last KTccminer but i don't succeded. I post an issue :
https://github.com/KlausT/ccminer/issues/249?_pjax=%23js-repo-pjax-container

I just saw his response :

Quote

You are probably using CUDA 8.0, I think.
There are two ways to fix the error:
You can either remove this line in the Makefile.am:
nvcc_ARCH += -gencode=arch=compute_70,code=sm_70
or you can install a newer CUDA version, like CUDA 9.2
https://developer.nvidia.com/cuda-downloads

Which version of CUDA are installed on last NVOC image ?

Pages: « 1 ... 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 [330] 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 »

Page 329

Viewing Page: 330