<<  >> (p.313)
    Author Topic: [ mining os ] nvoc  (Read 418569 times)

    • CryptAtomeTrader44
    Full Member
    ***
    Offline Offline

    Activity: 340
    Merit: 103

    It is easier to break an atom than partialities AE


    View Profile
    March 10, 2018, 11:08:28 PM
    Last edit: March 10, 2018, 11:21:58 PM by CryptAtomeTrader44
     #6241
    Quote from: WaveFront on March 10, 2018, 03:45:01 PM
    Bonjour CryptAtomeTrader44,
    Je parle assez bien le français, si tu veux on continue la discussion dans le forum en Français.
    When choosing a GPU for mining, you normally optimise 3 parameters:
    1) Hash rate for your target coin/algorithm
    2) power consumption
    3) cost of acquisition or time to break even
    For mining ETH I find the best compromise is in principle with the GTX 1060 6Gb or the GTX 1070, but this changes constantly.
    As far as I understand the hike in prices is mainly due to the card manufacturers and distributors rather than NVIDIA or AMD. NVIDIA and AMD are reluctant to increase production capacity, since the investment to create a new fab is huge and the volatility of the crypto market if high. So the risk/costs involved in increasing production capacity make that the market will stay in scarcity mode for some time.
     
    For the GPU memory, I just report what I read in the GTX 1060 discussion thread in BitcoinTalk (for example: https://bt.irlbtc.com/view/1575547.200 )
    I had a look at the "la boutique du mineur" and prices on the expensive side.
    If you want to find good deals on GPU you have to expand your search outside France and check prices on a regular base. On amazon.fr for example prices can fluctuate 20% from one day to the next one.
    Check German online shops they have pretty competitive prices.


    Je regarde les comparateurs de prix presque tous les jours et je suis en mesure de t'affirmer que sur Amazon il n'y pas de différence de prix si ce n'est que tu peux payer plus cher.

    I look at price comparators almost every day and I can tell you that on Amazon there is no difference in price except that you can pay more.
    I don't know about germany's shops, but if you buy in germany, you have to pay other taxes or trasnport costs. So, i am ready to discuss on PM with you about that.

    I'll continue in private messages.

  • infowire
    Newbie
    *
    Offline Offline

    Activity: 96
    Merit: 0


    View Profile
    March 11, 2018, 06:03:31 AM
     #6242
    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070,          P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070,          P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080,          P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti,      P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070,          P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 51, 70 %, 0 %, 22.80 W, 120.00 W

     How can i tell which card ?

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    March 11, 2018, 11:17:37 AM
     #6243
    Quote from: infowire on March 11, 2018, 06:03:31 AM
    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070,          P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070,          P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080,          P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti,      P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070,          P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 51, 70 %, 0 %, 22.80 W, 120.00 W

     How can i tell which card ?

    Looks like all cards dropped, either a cuda error on 1 of the cards or network issue
    Have a look a 2-3 lines before this warning you should see watchdog error message.
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • ababadababa
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    March 11, 2018, 11:49:58 AM
    Last edit: March 11, 2018, 12:08:24 PM by ababadababa
     #6244
    hello guys,i am just getting involved into mining, i made nvoc 0019 usb and changed all the settings like it is shown in Voskcoin video very basic setup, but after all it still keeps connecting to nanopool, please help me, i know this simple but i am newbe


    COIN="ZEN"

    AUTO_START_MINER="YES"    

    # ZEC
    ZEC_WORKER="ababadababa.ababazec"
    # replace_with_your_ZEC_address
    ZEC_ADDRESS="ababadababa"
    ZEC_POOL="zec-eu.suprnova.cc"
    ZEC_PORT="2142"

    # ZEN
    ZEN_WORKER="ababadababa.tempworker1"
    ZEN_ADDRESS="znhjMywQKj3y5be8KA53e7RBBVMabegmG6o"
    ZEN_POOL="zen.suprnova.cc"
    ZEN_PORT="3618"
    this is the settings i did, and it never starts mining for me, but for zec-us-east1.nanopool.org:6666
    thanks for help

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    March 11, 2018, 12:11:25 PM
     #6245
    Quote from: ababadababa on March 11, 2018, 11:49:58 AM
    hello guys,i am just getting involved into mining, i made nvoc 0019 usb and changed all the settings like it is shown in Voskcoin video very basic setup, but after all it still keeps connecting to nanopool, please help me, i know this simple but i am newbe


    COIN="ZEN"

    AUTO_START_MINER="YES"    

    # ZEC
    ZEC_WORKER="ababadababa.ababazec"
    # replace_with_your_ZEC_address
    ZEC_ADDRESS="ababadababa"
    ZEC_POOL="zec-eu.suprnova.cc"
    ZEC_PORT="2142"

    # ZEN
    ZEN_WORKER="ababadababa.tempworker1"
    ZEN_ADDRESS="znhjMywQKj3y5be8KA53e7RBBVMabegmG6o"
    ZEN_POOL="zen.suprnova.cc"
    ZEN_PORT="3618"
    this is the settings i did, and it never starts mining for me, but for zec-us-east1.nanopool.org:6666
    thanks for help

    Which version you installed?
    You edited the 1bash in small partition or the one inhome/m1/ ?
    There was a bug that dont copy your 1bash from small 9mb drive tohome/m1 at first boot, solved in latest image.

    Try the latest v19-2.0 shrinked  image :
    nvOC 19-2.0 Shrinked Image Mega.nz Download link

    Code:
    Image size: 11 GB
    Download size: 3.8 GB
    Auto Expand to full size on first boot
    Fixed copy 1bash from fat partition to SSD/HDD on first boot
    SHA256: ACCA9787169E6E722ED74FB02DBE1C44E7760CEB537CB79D4C61C7FFF8AD3057


    P.S: suprnova use your username not wallet address.
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • ababadababa
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    March 11, 2018, 12:15:50 PM
     #6246
    Quote from: papampi on March 11, 2018, 12:11:25 PM
    Quote from: ababadababa on March 11, 2018, 11:49:58 AM
    hello guys,i am just getting involved into mining, i made nvoc 0019 usb and changed all the settings like it is shown in Voskcoin video very basic setup, but after all it still keeps connecting to nanopool, please help me, i know this simple but i am newbe


    COIN="ZEN"

    AUTO_START_MINER="YES"    

    # ZEC
    ZEC_WORKER="ababadababa.ababazec"
    # replace_with_your_ZEC_address
    ZEC_ADDRESS="ababadababa"
    ZEC_POOL="zec-eu.suprnova.cc"
    ZEC_PORT="2142"

    # ZEN
    ZEN_WORKER="ababadababa.tempworker1"
    ZEN_ADDRESS="znhjMywQKj3y5be8KA53e7RBBVMabegmG6o"
    ZEN_POOL="zen.suprnova.cc"
    ZEN_PORT="3618"
    this is the settings i did, and it never starts mining for me, but for zec-us-east1.nanopool.org:6666
    thanks for help

    Which version you installed?
    You edited the 1bash in small partition or the one inhome/m1/ ?
    There was a bug that dont copy your 1bash from small 9mb drive tohome/m1 at first boot, solved in latest image.

    Try the latest v19-2.0 shrinked  image :
    nvOC 19-2.0 Shrinked Image Mega.nz Download link

    Code:
    Image size: 11 GB
    Download size: 3.8 GB
    Auto Expand to full size on first boot
    Fixed copy 1bash from fat partition to SSD/HDD on first boot
    SHA256: ACCA9787169E6E722ED74FB02DBE1C44E7760CEB537CB79D4C61C7FFF8AD3057


    P.S: suprnova use your username not wallet address.

    nvOC-V0019-2.0.img.tar i downloaded this from gdrive, ok i will try this one now thank you

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    March 11, 2018, 12:19:20 PM
     #6247
    Quote from: ababadababa on March 11, 2018, 12:15:50 PM
    Quote from: papampi on March 11, 2018, 12:11:25 PM
    Quote from: ababadababa on March 11, 2018, 11:49:58 AM
    hello guys,i am just getting involved into mining, i made nvoc 0019 usb and changed all the settings like it is shown in Voskcoin video very basic setup, but after all it still keeps connecting to nanopool, please help me, i know this simple but i am newbe


    COIN="ZEN"

    AUTO_START_MINER="YES"    

    # ZEC
    ZEC_WORKER="ababadababa.ababazec"
    # replace_with_your_ZEC_address
    ZEC_ADDRESS="ababadababa"
    ZEC_POOL="zec-eu.suprnova.cc"
    ZEC_PORT="2142"

    # ZEN
    ZEN_WORKER="ababadababa.tempworker1"
    ZEN_ADDRESS="znhjMywQKj3y5be8KA53e7RBBVMabegmG6o"
    ZEN_POOL="zen.suprnova.cc"
    ZEN_PORT="3618"
    this is the settings i did, and it never starts mining for me, but for zec-us-east1.nanopool.org:6666
    thanks for help

    Which version you installed?
    You edited the 1bash in small partition or the one inhome/m1/ ?
    There was a bug that dont copy your 1bash from small 9mb drive tohome/m1 at first boot, solved in latest image.

    Try the latest v19-2.0 shrinked  image :
    nvOC 19-2.0 Shrinked Image Mega.nz Download link

    Code:
    Image size: 11 GB
    Download size: 3.8 GB
    Auto Expand to full size on first boot
    Fixed copy 1bash from fat partition to SSD/HDD on first boot
    SHA256: ACCA9787169E6E722ED74FB02DBE1C44E7760CEB537CB79D4C61C7FFF8AD3057


    P.S: suprnova use your username not wallet address.

    nvOC-V0019-2.0.img.tar i downloaded this from gdrive, ok i will try this one now thank you

    You can manually copy the 1bash from small fat partition to home directory
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • infowire
    Newbie
    *
    Offline Offline

    Activity: 96
    Merit: 0


    View Profile
    March 11, 2018, 02:24:27 PM
     #6248
    Quote from: papampi on March 11, 2018, 11:17:37 AM
    Quote from: infowire on March 11, 2018, 06:03:31 AM
    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070,          P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070,          P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080,          P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti,      P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070,          P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 51, 70 %, 0 %, 22.80 W, 120.00 W

     How can i tell which card ?

    Looks like all cards dropped, either a cuda error on 1 of the cards or network issue
    Have a look a 2-3 lines before this warning you should see watchdog error message.


    So looks like 0, 5 GPU
    Can gpu 5 crash gpu 0? I set it as usual for gpu 0 it shouldn't be a culprit.



    GPU 0, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 0, GpuMiner kx failed 1
    GPU 0 failed
    GPU 5, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 5, GpuMiner kx failed 1
    GPU 5 failed
    GPU 5, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 5, GpuMiner kx failed 1
    GPU 5 failed
    ETH: 03/09/18-13:39:35 - New job from us2.ethermine.org:4444
    ETH - Total Speed: 0.000 Mh/s, Total Shares: 13417, Rejected: 0, Time: 70:23
    ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s
     PASC - Total Speed: 0.000 Mh/s, Total Shares: 7845, Rejected: 47
     PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s
    GPU0 t=53C fan=50%, GPU1 t=58C fan=60%, GPU2 t=46C fan=50%, GPU3 t=52C fan=50%, GPU4 t=58C fan=100%, GPU5 t=52C fan=50%, GPU6 t=51C fan=50%, GPU7 t=56C fan=65%
    CRITICAL: Fri Mar  9 13:39:44 MST 2018 - GPU Utilization is too low: restarting 3main...


    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070, P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070, P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080, P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti, P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070, P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 51, 70 %, 0 %, 22.80 W, 120.00 W

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    March 11, 2018, 02:53:07 PM
    Last edit: March 11, 2018, 03:13:43 PM by papampi
     #6249
    Quote from: infowire on March 11, 2018, 02:24:27 PM
    Quote from: papampi on March 11, 2018, 11:17:37 AM
    Quote from: infowire on March 11, 2018, 06:03:31 AM
    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070,          P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070,          P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080,          P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti,      P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070,          P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 51, 70 %, 0 %, 22.80 W, 120.00 W

     How can i tell which card ?

    Looks like all cards dropped, either a cuda error on 1 of the cards or network issue
    Have a look a 2-3 lines before this warning you should see watchdog error message.


    So looks like 0, 5 GPU
    Can gpu 5 crash gpu 0? I set it as usual for gpu 0 it shouldn't be a culprit.



    GPU 0, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 0, GpuMiner kx failed 1
    GPU 0 failed
    GPU 5, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 5, GpuMiner kx failed 1
    GPU 5 failed
    GPU 5, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 5, GpuMiner kx failed 1
    GPU 5 failed
    ETH: 03/09/18-13:39:35 - New job from us2.ethermine.org:4444
    ETH - Total Speed: 0.000 Mh/s, Total Shares: 13417, Rejected: 0, Time: 70:23
    ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s
     PASC - Total Speed: 0.000 Mh/s, Total Shares: 7845, Rejected: 47
     PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s
    GPU0 t=53C fan=50%, GPU1 t=58C fan=60%, GPU2 t=46C fan=50%, GPU3 t=52C fan=50%, GPU4 t=58C fan=100%, GPU5 t=52C fan=50%, GPU6 t=51C fan=50%, GPU7 t=56C fan=65%
    CRITICAL: Fri Mar  9 13:39:44 MST 2018 - GPU Utilization is too low: restarting 3main...


    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070, P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070, P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080, P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti, P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070, P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 51, 70 %, 0 %, 22.80 W, 120.00 W




    That's it lower Memory Clock to prevent illegal memory access.
    I also think your power limit for 1060 and 1070 are too high, what are your oc and mc values?
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • CryptAtomeTrader44
    Full Member
    ***
    Offline Offline

    Activity: 340
    Merit: 103

    It is easier to break an atom than partialities AE


    View Profile
    March 11, 2018, 03:51:46 PM
     #6250
    This enterprise looks like using nvOCrxOC approach
    https://minerone.net/

    Is someone looks their code ?

    I'm skeptic about their dashboard and it looks like SMOS.

    What do you think about their system that claim 0.5$ fees/month/card (in cryptos for sure)?

  • infowire
    Newbie
    *
    Offline Offline

    Activity: 96
    Merit: 0


    View Profile
    March 12, 2018, 06:03:16 PM
     #6251
    Quote from: papampi on March 11, 2018, 02:53:07 PM
    Quote from: infowire on March 11, 2018, 02:24:27 PM
    Quote from: papampi on March 11, 2018, 11:17:37 AM
    Quote from: infowire on March 11, 2018, 06:03:31 AM
    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070,          P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070,          P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080,          P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti,      P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070,          P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB,   P2, 51, 70 %, 0 %, 22.80 W, 120.00 W

     How can i tell which card ?

    Looks like all cards dropped, either a cuda error on 1 of the cards or network issue
    Have a look a 2-3 lines before this warning you should see watchdog error message.


    So looks like 0, 5 GPU
    Can gpu 5 crash gpu 0? I set it as usual for gpu 0 it shouldn't be a culprit.



    GPU 0, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 0, GpuMiner kx failed 1
    GPU 0 failed
    GPU 5, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 5, GpuMiner kx failed 1
    GPU 5 failed
    GPU 5, GpuMiner cu_k03 failed 77, an illegal memory access was encountered
    GPU 5, GpuMiner kx failed 1
    GPU 5 failed
    ETH: 03/09/18-13:39:35 - New job from us2.ethermine.org:4444
    ETH - Total Speed: 0.000 Mh/s, Total Shares: 13417, Rejected: 0, Time: 70:23
    ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s
     PASC - Total Speed: 0.000 Mh/s, Total Shares: 7845, Rejected: 47
     PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s
    GPU0 t=53C fan=50%, GPU1 t=58C fan=60%, GPU2 t=46C fan=50%, GPU3 t=52C fan=50%, GPU4 t=58C fan=100%, GPU5 t=52C fan=50%, GPU6 t=51C fan=50%, GPU7 t=56C fan=65%
    CRITICAL: Fri Mar  9 13:39:44 MST 2018 - GPU Utilization is too low: restarting 3main...


    WARNING: Sat Mar 10 15:16:33 MST 2018 - Problem found: See diagnostics below:
    Percent of GPUs bellow threshold: 100 %
    name, pstate, temperature.gpu, fan.speed [%], utilization.gpu [%], power.draw [W], power.limit [W]
    GeForce GTX 1070, P2, 51, 50 %, 0 %, 32.66 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 53, 65 %, 0 %, 22.77 W, 120.00 W
    GeForce GTX 1070, P2, 44, 50 %, 0 %, 31.21 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 47, 50 %, 0 %, 22.72 W, 120.00 W
    GeForce GTX 1080, P2, 53, 95 %, 0 %, 37.04 W, 140.00 W
    GeForce GTX 1080 Ti, P2, 50, 50 %, 0 %, 54.60 W, 145.00 W
    GeForce GTX 1070, P2, 49, 50 %, 0 %, 33.41 W, 140.00 W
    GeForce GTX 1060 6GB, P2, 51, 70 %, 0 %, 22.80 W, 120.00 W




    That's it lower Memory Clock to prevent illegal memory access.
    I also think your power limit for 1060 and 1070 are too high, what are your oc and mc values?


    125 ans 140

  • ababadababa
    Newbie
    *
    Offline Offline

    Activity: 6
    Merit: 0


    View Profile
    March 13, 2018, 12:27:00 AM
     #6252
    Quote from: ababadababa on March 11, 2018, 12:15:50 PM
    Quote from: papampi on March 11, 2018, 12:11:25 PM
    Quote from: ababadababa on March 11, 2018, 11:49:58 AM
    hello guys,i am just getting involved into mining, i made nvoc 0019 usb and changed all the settings like it is shown in Voskcoin video very basic setup, but after all it still keeps connecting to nanopool, please help me, i know this simple but i am newbe


    COIN="ZEN"

    AUTO_START_MINER="YES"    

    # ZEC
    ZEC_WORKER="ababadababa.ababazec"
    # replace_with_your_ZEC_address
    ZEC_ADDRESS="ababadababa"
    ZEC_POOL="zec-eu.suprnova.cc"
    ZEC_PORT="2142"

    # ZEN
    ZEN_WORKER="ababadababa.tempworker1"
    ZEN_ADDRESS="znhjMywQKj3y5be8KA53e7RBBVMabegmG6o"
    ZEN_POOL="zen.suprnova.cc"
    ZEN_PORT="3618"
    this is the settings i did, and it never starts mining for me, but for zec-us-east1.nanopool.org:6666
    thanks for help

    Which version you installed?
    You edited the 1bash in small partition or the one inhome/m1/ ?
    There was a bug that dont copy your 1bash from small 9mb drive tohome/m1 at first boot, solved in latest image.

    Try the latest v19-2.0 shrinked  image :
    nvOC 19-2.0 Shrinked Image Mega.nz Download link

    Code:
    Image size: 11 GB
    Download size: 3.8 GB
    Auto Expand to full size on first boot
    Fixed copy 1bash from fat partition to SSD/HDD on first boot
    SHA256: ACCA9787169E6E722ED74FB02DBE1C44E7760CEB537CB79D4C61C7FFF8AD3057


    P.S: suprnova use your username not wallet address.

    nvOC-V0019-2.0.img.tar i downloaded this from gdrive, ok i will try this one now thank you


    hello, how many times i do not try all the time starts  mining zec on different pool then i have edited
    all the time starts
    SCREEN -dmSL minerhome/m1/zec/zm/latest/zm_miner --server zec-us-east1.nanopool.org --user t1XfkZUZWME8FnRiFxHZQAQ2K1UdQMbshJp.106 --pass x --port 6666 --time

    what am i doing wrong?

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    March 13, 2018, 06:47:58 AM
     #6253
    Quote from: ababadababa on March 13, 2018, 12:27:00 AM
    Quote from: ababadababa on March 11, 2018, 12:15:50 PM
    Quote from: papampi on March 11, 2018, 12:11:25 PM
    Quote from: ababadababa on March 11, 2018, 11:49:58 AM
    hello guys,i am just getting involved into mining, i made nvoc 0019 usb and changed all the settings like it is shown in Voskcoin video very basic setup, but after all it still keeps connecting to nanopool, please help me, i know this simple but i am newbe


    COIN="ZEN"

    AUTO_START_MINER="YES"    

    # ZEC
    ZEC_WORKER="ababadababa.ababazec"
    # replace_with_your_ZEC_address
    ZEC_ADDRESS="ababadababa"
    ZEC_POOL="zec-eu.suprnova.cc"
    ZEC_PORT="2142"

    # ZEN
    ZEN_WORKER="ababadababa.tempworker1"
    ZEN_ADDRESS="znhjMywQKj3y5be8KA53e7RBBVMabegmG6o"
    ZEN_POOL="zen.suprnova.cc"
    ZEN_PORT="3618"
    this is the settings i did, and it never starts mining for me, but for zec-us-east1.nanopool.org:6666
    thanks for help

    Which version you installed?
    You edited the 1bash in small partition or the one inhome/m1/ ?
    There was a bug that dont copy your 1bash from small 9mb drive tohome/m1 at first boot, solved in latest image.

    Try the latest v19-2.0 shrinked  image :
    nvOC 19-2.0 Shrinked Image Mega.nz Download link

    Code:
    Image size: 11 GB
    Download size: 3.8 GB
    Auto Expand to full size on first boot
    Fixed copy 1bash from fat partition to SSD/HDD on first boot
    SHA256: ACCA9787169E6E722ED74FB02DBE1C44E7760CEB537CB79D4C61C7FFF8AD3057


    P.S: suprnova use your username not wallet address.

    nvOC-V0019-2.0.img.tar i downloaded this from gdrive, ok i will try this one now thank you


    hello, how many times i do not try all the time starts  mining zec on different pool then i have edited
    all the time starts
    SCREEN -dmSL minerhome/m1/zec/zm/latest/zm_miner --server zec-us-east1.nanopool.org --user t1XfkZUZWME8FnRiFxHZQAQ2K1UdQMbshJp.106 --pass x --port 6666 --time

    what am i doing wrong?

    Are you sure you are editing thehome/m1/1bash and not the one in the small fat partition?

    If you are on your local machine open files, click home, there you see 1bash file in home directory, open and edit it.

    or run this from guake terminal to open it:
    Code:
    gedithome/m1/1bash

    If working from ssh:
    Code:
    nano home/m1/1bash
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • hack4love
    Newbie
    *
    Offline Offline

    Activity: 152
    Merit: 0


    View Profile
    March 14, 2018, 08:54:49 AM
     #6254
    Is it WiFi support I have D-Link dwa 132  WiFi adapter and
    what the monthly fee
    And what the best amd  driver for my Rx 560 I use blockchain

    And what the max number for GPUs

  • $ONOFCOIN
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    March 14, 2018, 12:56:29 PM
     #6255
    Have anyone here mining raven coin yet. I wondering if it possible to run cc miner on nvoc.

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    March 14, 2018, 03:43:10 PM
     #6256
    Quote from: hack4love on March 14, 2018, 08:54:49 AM
    Is it WiFi support I have D-Link dwa 132  WiFi adapter and
    what the monthly fee
    And what the best amd  driver for my Rx 560 I use blockchain

    And what the max number for GPUs

    Most of the WiFi adapters are supported. If your WiFi adapter works with plain Ubuntu it will work with nvoc and rxoc.

    There is no monthly fee for nvoc and rxoc. It's free.

    This thread is for nvoc (nvidia cards only). You might want to search for rxoc thread (amd cards only). Unfortunately nvoc doesn't support amd cards at this time.

    At the current state nvoc supports 19 GPU's with Asus B250 Mining expert, however due to motherboard limitation you can use 13 regular GPU's and you have to use 6 GP10x-100 mining GPU's for a total of 19.
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • damNmad
    Full Member
    ***
    Offline Offline

    Activity: 378
    Merit: 104


    nvOC forever


    View Profile
    March 14, 2018, 09:34:30 PM
     #6257
    Quote from: $ONOFCOIN on March 14, 2018, 12:56:29 PM
    Have anyone here mining raven coin yet. I wondering if it possible to run cc miner on nvoc.

    Yes we have already added instructions for adding RAVEN coin and getting the ccminer for it, it uses MSFT ccminer.

    You can get most of the ccminers available in the market on nvOC, if there isn't one on the list we will provide instructions how to get it and how to build it as well.

    See the below post which explains more in detail;

    https://bt.irlbtc.com/view/1854250.msg31430936#msg31430936
    DeepOnion    ▬▬  Anonymous and Untraceable  ▬▬    ENJOY YOUR PRIVACY  •  JOIN DEEPONION
    ▐▐▐▐▐▐▐▐   ANN  Whitepaper  Facebook  Twitter  Telegram  Discord    ▌▌▌▌▌▌▌▌
    Get $ONION  (✔Cryptopia  ✔KuCoin)  |  VoteCentral  Register NOW!  |  Download DeepOnion

  • infowire
    Newbie
    *
    Offline Offline

    Activity: 96
    Merit: 0


    View Profile
    March 15, 2018, 02:54:12 PM
    Last edit: March 16, 2018, 01:14:47 AM by infowire
     #6258
    Do these settings look alright ?
    For eth.

    EVGA SC2 1070 Power 140, MemOC 1250
    EVGA 1060 Power 120, MemOC 1100
    EVGA 1080 Power 150, MemOC 1260
    EVGA 1080 Ti 150, MemOC 1270

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    March 15, 2018, 07:38:06 PM
     #6259
    Quote from: infowire on March 15, 2018, 02:54:12 PM
    Do these settings look alright ?

    EVGA SC2 1070 Power 140, MemOC 1250
    EVGA 1060 Power 120, MemOC 1100
    EVGA 1080 Power 150, MemOC 1260
    EVGA 1080 Ti 150, MemOC 1270

    Depends what you are mining, what memory chips you cards have, etc.

    For example, my settings for ETH:
    1060 with Samsung memory: PL: 75, Core: -200, Mem: 1750-1850, hash ~25 MH/s
    1070 with Micron memory: PL: 110, Core: -200, Mem: 1300-1400, hash ~ 31 MH/s
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • infowire
    Newbie
    *
    Offline Offline

    Activity: 96
    Merit: 0


    View Profile
    March 16, 2018, 01:20:32 AM
     #6260
    Quote from: leenoox on March 15, 2018, 07:38:06 PM
    Quote from: infowire on March 15, 2018, 02:54:12 PM
    Do these settings look alright ?

    EVGA SC2 1070 Power 140, MemOC 1250
    EVGA 1060 Power 120, MemOC 1100
    EVGA 1080 Power 150, MemOC 1260
    EVGA 1080 Ti 150, MemOC 1270

    Depends what you are mining, what memory chips you cards have, etc.

    For example, my settings for ETH:
    1060 with Samsung memory: PL: 75, Core: -200, Mem: 1750-1850, hash ~25 MH/s
    1070 with Micron memory: PL: 110, Core: -200, Mem: 1300-1400, hash ~ 31 MH/s

    I don't know if its samsung or micron, i think my 70's are micron. Any idea how to check in linux ?
    Pages: « 1 ... 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 [313] 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 »
      Print  
Page 312
Viewing Page: 313

IRLBTC™ © 2025 IRLBTC.com