Any options or machine for make my electricity bill at half???.l

Is there any way for me to read it off of the SD card from my PC? Or would I have to go and swap it back into my Titan? If I have to swap it, try manually disabling a die on your Titan first. You should see the same behavior, but if you don't I'll go swap the cards and get you the log.

Nevermind, I confirmed the behaviour on my titan as well when manually disabling dies. Grrr, I will have to rewrite the fix somehow lol. Ill keep ya posted.

Question for ya, are those dies permanently damaged or do they just stop randomly working while mining?

I found the issue w/ the script, it seems when dies are manually disabled the script erronously detects that as the dies also have being failed and trying to restart them(the old way before my script) haha
So, Ill have to come up w/ a way to detect them manually being off or not.

yeah a lot of us have 1 die dead on a cube and set to OFF (knc will not rma only 1 dead die on a cube) pricks  I have 2 cubes with 1 dead die each set to OFF so this in present
form probably wont do much for me

however if you could get it to work not paying attention to the dies that are OFF it could be helpful in about 1x every month or two ..never more then 1x one of my titans drops a die and a power down reboot brings it back up but does not happen to me very often  

in other words it would be a nice "JUST IN CASE" another die goes flaky ..the unit would reboot

anyway thanks for your efforts




In my case the dies never worked from almost day one on my orig titan so they have been manually set to off at least 8 months w/o issues so it is stable in this format
when I muck with them it seems to make my cubes worse never did find a way to get them back up

i suspect that it is a heat paste issue i heard that the orig titans were slapped together and this would probably fix it but too chicken to try to do so i somehow
manage with the other titan I got used to get 650.1mh out of both so screw it ..it is a miracle these raspberry pi science fair projects work that good imho

anyway so yeah you set them to OFF and at least in my case all is stable ...the 1 die that drops maybe once every 1 or 2 months is on a different cube anyway and has
not really been an issue

again thanks for your efforts

thanks not exactly sure if it is much use to me ..i suppose if it is stable I could run it even with my 2 cubes with dies set to OFF postion. in JUST IN CASE MODE
if when a different die not set to off dumps out.....but
truthfully don't have that isssue (yet..knock wood...) the every 2 days die dumping and needs a re-boot problem that some folk have..this is a good fix for their issues
in that KNC won't address them

hmmmm.....what else could you do to tweak (i suspect) the somewhat lack laster KNC code....hmmmmm..for all of us?

others ..thoughts on what can be tweaked (got to keep the guy busy......heh..)

again if even on the sidelines I appreciate your efforts

will have to ponder what ifs that could be added to knc miner code for Titans on github since KNC has officially abandoned it it seems

over clocking comes to mind but that seems to be 'dead' as far as I have heard at 325 settings I read from others on here that is prety much maxed out

I have heard of some Titan owners who have run their units full out from day one at 325 settings at 1 click below the standard 0.0366 or whatever the default voltage is

not sure if that means anything just found it interesting

probably what we need next is a youtube video on completely taking apart a cube..checking the die showing a good brand of thermal paste and how to do a re-do
and or other standard tests on shoddy workmanship to look for .....anyway a guess on some of why these beasts are so flaky

which I suspect shoddy workmanship is probably the reason I have 2 dies set to off the last 8 months on my orig titan ..but again pretty high stakes for a dweeb
like me to dive into something like that or other hardware tweaks.......likely after the titan(s) are doorstops I will find I could have should have done so...but I suppose
with a video and enough folk finding that this WAS an issue I would probably then be brave enough to look as well..anyway these are just my suspicions

anyway others with ideas on what to add/look into/ or tweak on titan firmware as long as it seems some people have some willingness and expertise to do so?
toss some ideas out here if you don't mind....i only have lame guesses myself

I would so like to over clock these buggers and show the users here can/fix/make/mod better firmware then those knc hacks just because..but alas the last
thing I programmed was an apple ][ back in the day

anyway better minds then my own on this .....chime in please

Awesome! What was the fix? I'd like to give it a shot!

While it's possible, I don't think it was the case with my unit. All dies worked when I first received it from KNC. 2 days later, I was down a die. About a week later another. The 3rd die went out maybe 2 months in. They wouldn't have worked from the get-go if it was shipping damage.

Looking forward to trying your new firmware with the fix!

350MHz would be great! Bring it on, we'll deal with any potential issues with power delivery.   I wouldn't say they're maxed, though, as Neptune cubes use more power and I haven't had a single melted connector using proper wiring. I'm not even using the "Y" splitters I have for 10 of the Neptune cubes, no issues.