<<  >> (p.250)
    Author Topic: [ mining os ] nvoc  (Read 418569 times)

    • chem1990
    Newbie
    *
    Offline Offline

    Activity: 12
    Merit: 0


    View Profile
    December 19, 2017, 01:15:26 PM
     #4981
    Quote from: papampi on December 19, 2017, 09:32:43 AM

    Can you check and see if vbrick solution for his mouse works for you too or not ?


    Ok, now i installed fullzero version and updated the image with your script but without the ubuntu updates. networking with wi fi works. it seems that it works becouse i just rewstarted 10 times and network is established with no problem...

    it must be something with networking manager or power menagment with wifi...

  • Stubo
    Member
    **
    Offline Offline

    Activity: 224
    Merit: 13


    View Profile
    December 19, 2017, 01:27:56 PM
     #4982
    Quote from: papampi on December 19, 2017, 07:33:02 AM
    Quote from: infowire on December 18, 2017, 10:40:31 PM
    So i mined for two weeks or more, no issue.  All the sudden is goes off online and watchdog keeps rebooting.   Why can teamviewer be on the bash script.... every time terminal is ran is restarts teamview...




    It seems there is a mismatch in your 3main line 945, open 3main and check line 945

    Or if you have never edited it, just open it and check to see which variable it points to in 1bash

    I just checked the baseline 19-1.4 code and line 945 of 3main is

    Code:
    while [ $gpu -lt $GPUS ]

    Which tells me the video driver on this host is hosed. Please try the following command which has fixed similar issues in the past:

    Code:
    ### Fix for nvidia-smi not found
    # Box was rebooted while making kernel updates
    sudo dpkg --configure -a

    After that, reboot and see if things are better.

  • infowire
    Newbie
    *
    Offline Offline

    Activity: 96
    Merit: 0


    View Profile
    December 19, 2017, 02:18:35 PM
    Last edit: December 19, 2017, 03:05:43 PM by infowire
     #4983
    Quote from: papampi on December 19, 2017, 07:33:02 AM
    Quote from: infowire on December 18, 2017, 10:40:31 PM
    So i mined for two weeks or more, no issue.  All the sudden is goes off online and watchdog keeps rebooting.   Why can teamviewer be on the bash script.... every time terminal is ran is restarts teamview...

    https://preview.ibb.co/jOdcvR/hmm.jpg


    It seems there is a mismatch in your 3main line 945, open 3main and check line 945

    Or if you have never edited it, just open it and check to see which variable it points to in 1bash

    3main (never edited)

    Code:
    if [ $P106_100_FULL_HEADLESS_MODE == "NO" ]
      then

        gpu=0
        while [ $gpu -lt $GPUS ]
        do
          for j in $TI
          do
            CORE=${__CORE_OVERCLOCK[${gpu}]}
            MEM=${MEMORY_OVERCLOCK[${gpu}]}
            ${NVD} -a [gpu:$gpu]/GPUGraphicsClockOffset[${j}]=$CORE
            ${NVD} -a [gpu:$gpu]/GPUMemoryTransferRateOffset[${j}]=$MEM
          done
          gpu=$(($gpu+1))
        done

        if [[ $MANUAL_FAN == "YES" && $MINER_TEMP_CONTROL == "NO" ]]
        then
          gpu=0
          while [ $gpu -lt $GPUS ]
          do
            ${NVD} -a [gpu:$gpu]/GPUFanControlState=1
            ${NVD} -a [fan:$gpu]/GPUTargetFanSpeed=${FAN_SPEED}

    Whole 3main file: https://pastebin.com/XDNTzjE1
    Whole bash1: https://pastebin.com/qeZnncUa


     I upgraded to 19.2 with your script. Now its giving me :

    https://preview.ibb.co/m3suc6/2nd.jpg


    Edit:

    I only see 10 cards in Nvdia control panel, i have 12. Maybe bad riser? My computer reboots after a min. Watchdog is off and auto start mine is set to NO.
     

  • infowire
    Newbie
    *
    Offline Offline

    Activity: 96
    Merit: 0


    View Profile
    December 19, 2017, 03:07:52 PM
     #4984
    Quote from: Stubo on December 19, 2017, 01:27:56 PM


    Code:
    ### Fix for nvidia-smi not found
    # Box was rebooted while making kernel updates
    sudo dpkg --configure -a

    After that, reboot and see if things are better.


    That didn't help.

  • Stubo
    Member
    **
    Offline Offline

    Activity: 224
    Merit: 13


    View Profile
    December 19, 2017, 03:27:05 PM
     #4985
    Quote from: infowire on December 19, 2017, 03:07:52 PM
    Quote from: Stubo on December 19, 2017, 01:27:56 PM


    Code:
    ### Fix for nvidia-smi not found
    # Box was rebooted while making kernel updates
    sudo dpkg --configure -a

    After that, reboot and see if things are better.


    That didn't help.

    Ok, this and the pic in the last post makes me think this is a HW issue. This command will report what GPUs the system knows. Please try it:

    Code:
    ./nvOC gpuinfo

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    December 19, 2017, 03:27:35 PM
     #4986
    Quote from: infowire on December 19, 2017, 02:18:35 PM
    Quote from: papampi on December 19, 2017, 07:33:02 AM
    Quote from: infowire on December 18, 2017, 10:40:31 PM
    So i mined for two weeks or more, no issue.  All the sudden is goes off online and watchdog keeps rebooting.   Why can teamviewer be on the bash script.... every time terminal is ran is restarts teamview...




    It seems there is a mismatch in your 3main line 945, open 3main and check line 945

    Or if you have never edited it, just open it and check to see which variable it points to in 1bash

    3main (never edited)

    Code:
    if [ $P106_100_FULL_HEADLESS_MODE == "NO" ]
      then

        gpu=0
        while [ $gpu -lt $GPUS ]
        do
          for j in $TI
          do
            CORE=${__CORE_OVERCLOCK[${gpu}]}
            MEM=${MEMORY_OVERCLOCK[${gpu}]}
            ${NVD} -a [gpu:$gpu]/GPUGraphicsClockOffset[${j}]=$CORE
            ${NVD} -a [gpu:$gpu]/GPUMemoryTransferRateOffset[${j}]=$MEM
          done
          gpu=$(($gpu+1))
        done

        if [[ $MANUAL_FAN == "YES" && $MINER_TEMP_CONTROL == "NO" ]]
        then
          gpu=0
          while [ $gpu -lt $GPUS ]
          do
            ${NVD} -a [gpu:$gpu]/GPUFanControlState=1
            ${NVD} -a [fan:$gpu]/GPUTargetFanSpeed=${FAN_SPEED}

    Whole 3main file: https://pastebin.com/XDNTzjE1
    Whole bash1: https://pastebin.com/qeZnncUa


     I upgraded to 19.2 with your script. Now its giving me :




    Edit:

    I only see 10 cards in Nvdia control panel, i have 12. Maybe bad riser? My computer reboots after a min. Watchdog is off and auto start mine is set to NO.
     



    On 19-1.4 it was showing lost GPU
    So its Bad riser, Bad GPU, ..

    Now on 19-2 giving you same with more details

    Check your hardware first.
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • Greek_miner_
    Newbie
    *
    Offline Offline

    Activity: 9
    Merit: 0


    View Profile
    December 19, 2017, 05:17:07 PM
     #4987
    I've searched through the thread but couldn't find an definite answer, is there a way to mine XVG with nvOC? Thanks

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    December 19, 2017, 05:59:09 PM
     #4988
    Quote from: vbrik on December 19, 2017, 04:41:53 PM
    Quote from: papampi on December 19, 2017, 08:52:30 AM
    Quote from: vbrik on December 19, 2017, 08:37:22 AM
    I'm just starting to mine ETN over at mininghub and need nvOC to parse the workername to the miner, presumably I can just edit 1bash and 0miner as follows...?

    1bash

    Code:
    # Electroneum(ETN) ## No Need to add stratum+tcp:// to server address
    ETN_WORKER="$WORKERNAME"
    ETN_ADDRESS="my account name"
    ETN_POOL="europe.cryptonight-hub.miningpoolhub.com"
    ETN_PORT="20596"

    0miner

    Code:
    if [ $COIN == "ETN" ]
    then
      HCD='/home/m1/KTccminer-cryptonight/ccminer'
      ADDR="$ETN_ADDRESS.$ETN_WORKER"


    Thanks in advance
    Mike

    Sorry and Thanks for catching the bug
    Worker was missing for KRB and ETN in 0miner and 1bash , fixed for stable release.

    KRB and ETN are looking for the KTccminer-cryptonight binaries btw.......not part of the 2.0 script upgrade, no dropbox link to any pre-compiled binary package....

    TIA
    Mike

    Again ... Sorry and Thanks

    Compiled and added to update script, please run the script again
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    December 19, 2017, 06:52:02 PM
     #4989
    Quote from: _S_C_ on December 18, 2017, 10:45:48 PM
    Quote from: kk003 on December 18, 2017, 04:33:21 PM
    Quote from: _S_C_ on December 18, 2017, 03:53:32 PM
    Hi guys, even after the new latest bios flash of my mobo, my situation remains the same ... trying nvOC 19-14 and 19-2 and I'm not able to boot my rig (black screen) ... If I look at my usb key after the facts, there are no more 1bash's file, no more 8coins file and no more Trash directory ...

    Uefi bios enable >4G done
    Disable onboard gpu done
    Legacy usb support enabled done

    Wonder what's wrong ? any ideas ? ...

    Only 19-13 works here ...

    -> rig's hardware setup :
    MB MSI Z270A PRO
    8G ram
    usb key Sandisk 32 G
    Intel G4400
    6 MSI 1080tis gaming x

    -> rig's hardware setup :
    MB MSI Z270A PRO
    8G ram
    usb key Sandisk 32 G
    Intel G4400
    6 EVGA 1080tis ftw3 gaming

    I think nvoc system is not uefi compatible. I would try to disable uefi bios.

    I'm already using no uefi (legacy enabled and secure boot disabled), this is not the problem.

    Strange thing is that all working nicely with 19-13 and lan's leds showing activities but with 19-14 still have black screen and no lan's leds activities at all ... any other idea ?

    Regards.



    I think on your board you have to disable:
    Windows 8.1/ 10 WHQL Support
    to turn uefi off. Give that a try.

    Also, if you have CSM option in your bios, turn that ON.

    And lastly, I've also got black screen with blinking cursor when I tried to boot from USB stick while I still had the SSD plugged in. Unplugging the SSD allowed USB stick to boot properly. After booting from USB (then shutting down), I replugged the SSD and it worked well afterwards.
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • Stubo
    Member
    **
    Offline Offline

    Activity: 224
    Merit: 13


    View Profile
    December 19, 2017, 06:57:49 PM
     #4990
    Quote from: Greek_miner_ on December 19, 2017, 05:17:07 PM
    I've searched through the thread but couldn't find an definite answer, is there a way to mine XVG with nvOC? Thanks

    A quick look:
    https://steemit.com/mining/@cryptomkd/how-to-start-mining-verge-xvg-on-pool-with-nvidia-gpu-s

    indicates that it can be mined with ccminer. There are many flavors of that miner included with nvOC 19-2.0 including the latest from Tpruvot (v2.2.3). However, from what I can see, there is no native support in this release for XVG. So nvOC can definitely mine it but it will take a couple of customizations to 1bash and 0miner to support it seemlessly.

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    December 19, 2017, 07:27:15 PM
     #4991
    double post... disregard
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • Greek_miner_
    Newbie
    *
    Offline Offline

    Activity: 9
    Merit: 0


    View Profile
    December 19, 2017, 07:36:16 PM
     #4992
    Quote from: leenoox on December 19, 2017, 07:27:15 PM
    double post... disregard
    Thanks.  Hopefully it can be included in the next update.

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    December 19, 2017, 08:11:51 PM
     #4993
    Quote from: vbrik on December 19, 2017, 08:04:28 PM
    Quote from: papampi on December 19, 2017, 05:59:09 PM
    Quote from: vbrik on December 19, 2017, 04:41:53 PM
    Quote from: papampi on December 19, 2017, 08:52:30 AM
    Quote from: vbrik on December 19, 2017, 08:37:22 AM
    I'm just starting to mine ETN over at mininghub and need nvOC to parse the workername to the miner, presumably I can just edit 1bash and 0miner as follows...?

    1bash

    Code:
    # Electroneum(ETN) ## No Need to add stratum+tcp:// to server address
    ETN_WORKER="$WORKERNAME"
    ETN_ADDRESS="my account name"
    ETN_POOL="europe.cryptonight-hub.miningpoolhub.com"
    ETN_PORT="20596"

    0miner

    Code:
    if [ $COIN == "ETN" ]
    then
      HCD='/home/m1/KTccminer-cryptonight/ccminer'
      ADDR="$ETN_ADDRESS.$ETN_WORKER"


    Thanks in advance
    Mike

    Sorry and Thanks for catching the bug
    Worker was missing for KRB and ETN in 0miner and 1bash , fixed for stable release.

    KRB and ETN are looking for the KTccminer-cryptonight binaries btw.......not part of the 2.0 script upgrade, no dropbox link to any pre-compiled binary package....

    TIA
    Mike

    Again ... Sorry and Thanks

    Compiled and added to update script, please run the script again

    Which script, the 4update script ? And run unelevated?

    TIA
    Mike

    Nope, the nvOC update script
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • killeriq
    Newbie
    *
    Offline Offline

    Activity: 22
    Merit: 0


    View Profile
    December 19, 2017, 10:18:57 PM
     #4994
    Code:
    Quote from: CryptAtomeTrader44 on December 19, 2017, 01:06:04 AM
    Quote from: killeriq on December 19, 2017, 12:02:03 AM
    Quote from: Stubo on December 18, 2017, 09:21:50 PM
    Quote from: killeriq on December 18, 2017, 09:07:34 PM

    Hello,
    trying to mine Lyra with ccminer, but it just fail to run all the time:
    Code:
    [2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569
    [2017-12-18 22:00:42] NVML GPU monitoring enabled.
    [2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.
    /home.m1/2unix: line 138: 2205 Terminated  bash '/home/m1/3main'
    or
    Code:
    /home.m1/2unix: line 138: 2907 Terminated  bash '/home/m1/3main'
    or
    /home.m1/2unix: line 138: 3554 Terminated  bash '/home/m1/3main'

    Any clue how to fix it? thanks

    What version of nvOC? Are you LOCAL or REMOTE configuration?

    Im on 19-20 and LOCAL, thx

    Please,
    Execute in remote ssh terminal (Or at tty01 (CTRL+ALT+F1)) the nvOC report command and give us here the result by copy/paste
    nvOC file to diagnose is inhome/m1

    Code:
    nvOC report

    Set this to NO in 1 bash

    Code:
    AUTO_START_MINER="NO"      # YES or NO # Set this to NO when troubleshooting, this will prevent the watchdog restarting the rig

    And try to execute or copy paste the minning command without automatic loop of nvOC Like that but in replacing variables :
    Code:
    if [ $COIN == "ZCOIN" ]
    then
      HCD='/home/m1/TPccminer/ccminer'
      ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER"
    [b]  screen -dmSL miner $HCD -a lyra2z -o stratum+tcp://$ZCOIN_POOL:$ZCOIN_PORT -u $ADDR -p $MINER_PWD[/b]
    fi


    Hello, here u go...

    Code:
    root@m1-desktop:~$./nvOC report

          Report generator v0019-2.0.002 by leenoox

    cat:root/1bash: No such file or directory

    [code]

    Software info:
    Report ver    :  v0019-2.0.002
    nvOC (1bash)  :
    nvOC (3main)  :  nvOC v0019-2.0 - Community Release
    1bash ver     :
    3main ver     :  v0019-2.0.005
    5watchdog ver :  v0019-2.0.011
    6tempcontrol v:  v0019-2.0.003
    wtm switch ver:  v0019-2.0.006
    Kernel        :  4.4.0-97-generic
    OS            :  Ubuntu 16.04.3 LTS
    System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
    nvidia driver :  387.34

    Hardware info:
    Motherboard   :  ASUS SABERTOOTH 990FX R2.0  Rev 1.xx
    BIOS ver.     :  2901 05/04/2016
    CPU Model     :  FX(tm)-8350 Eight-Core Processor
    CPU Cores     :  8 (Cores + Threads)
    Mem Total     :        16391036 kB
    Mem Free      :        15123064 kB
    Swap Total    :               0 kB
    Swap Free     :               0 kB
    Ethernet      :  Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)

    HDD and Partion info:
    NAME    SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR   MODEL             REV MOUNTPOINT
    sde    28.7G        disk    1       1 usb  SanDisk  Ultra Fit        1.00
    ├─sde1    9M vfat   part    1       1                                     /media/m1/12D3-A8691
    └─sde2 13.7G ext4   part    1       1                                     /

    VGA info:
    01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
    05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
    06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
    07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

    1bash settings:
    1bash version .............:
    LOCAL or REMOTE ...........:
    TEAMVIEWER started ........:
    SSH daemon started ........:
    SLOW_USB_KEY_MODE .........:
    SRR .......................:
    Watchdog ..................:

    Temp Control ..............:

    CLEAR_LOGS_ON_BOOT ........:
    AUTO_UPDATE ...............:
    AUTO_REBOOT ...............:
    _Parallax_MODE (upPaste)...:

    TELEGRAM_MESSAGES .:
    TELEGRAM_ALERTS .:

    P106_100_FULL_HEADLESS_MODE:
    GPUPowerMizerMode_Adjust...:
    POWERLIMIT (global) .......:
    CORE_OVERCLOCK (global)....:
    MEMORY_OVERCLOCK (global) .:
    MANUAL_FAN ................:
    ALGO_SPECIFIC_OC ..........:

    GLOBAL_WORKERNAME .........:
    AUTO_WORKERNAME ...........:
    plusCPU ...................:

    ZM_or_EWBF ................:

    COIN ......................:
    ZPOOLPASS .................: hidden_pass...,
    _WORKER ................:
    _ADDRESS ...............: ...
    _POOL ..................:



    WORK IN PROGRESS! Report script (beta release)

    *** If posting the Report on bitcointalk.org forum please copy everything
        between the
    Code:
    and [\code] including the [code] and [\code] tags.
        This will ensure proper alignment when posting the Report.


    root@m1-desktop:/home/m1#


    the code u mention should be pasted here instead or where? i have it probably wrong... Thanks

    Code:
      # ZCOIN lyra2v2
    #  if [ $COIN == "ZCOIN" ]
    #  then
    #    ALGORITHM="LYRA2V2"
    #    POWERLIMIT_WATTS=115
    #    __CORE_OVERCLOCK=100
    #    MEMORY_OVERCLOCK=-200
    #  fi
     
      if [ $COIN == "ZCOIN" ]
    then
      HCD='/home/m1/TPccminer/ccminer'
      ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER"
    [b]  screen -dmSL miner $HCD -a lyra2z -o stratum+tcp://$ZCOIN_POOL:$ZCOIN_PORT -u $ADDR -p $MINER_PWD[/b]
    fi
    [/code][/code]

  • joshuajones02
    Full Member
    ***
    Offline Offline

    Activity: 210
    Merit: 100


    View Profile
    December 20, 2017, 02:43:53 AM
     #4995
    Quote from: Tigel on December 18, 2017, 05:59:26 AM
    Quote from: joshuajones02 on December 18, 2017, 05:44:50 AM
    what can I type in the terminal to modify GPU settings while miner is running for each GPU individually? i.e Power limit, oc core, & fan speed

    For GPU1:

    nvidia-smi -i 1 -pl 75

    export DISPLAY=:0
    nvidia-settings -a [gpu:1]/GPUGraphicsClockOffset[3]=200
    nvidia-settings -a [gpu:1]/GPUMemoryTransferRateOffset[3]=1000
    nvidia-settings -a [gpu:1]/GPUFanControlState=1
    nvidia-settings -a [fan:1]/GPUTargetFanSpeed=8

    --
    Tigel

    thanks man
    ☰| World Fintech Startups | Microsoft Azure Partner | $1,5 M Raised During pre-ICO |☰
    ☰     BANKEX - Proof-of-Asset Protocol     ☰
    ☰| WHITE PAPER | BLOG ● SLACK ● TELEGRAM ● BITCOINTALK ● GITHUB ● TWITTER ● YOUTUBE ● FACEBOOK |☰

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    December 20, 2017, 04:06:29 AM
     #4996
    Hey killeriq,
    the ./nvOC report doesn't work when executed as root user. As you can notice, it didn't pull any values from 1bash.
    Please execute ./nvOC report as unprivileged user m1 and repost your report, copy and paste between the two code marks.
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • Vogan
    Newbie
    *
    Offline Offline

    Activity: 1
    Merit: 0


    View Profile
    December 20, 2017, 04:15:22 AM
     #4997
    Nice project

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    December 20, 2017, 07:44:25 AM
     #4998
    Quote from: killeriq on December 19, 2017, 10:18:57 PM
    Code:
    Quote from: CryptAtomeTrader44 on December 19, 2017, 01:06:04 AM
    Quote from: killeriq on December 19, 2017, 12:02:03 AM
    Quote from: Stubo on December 18, 2017, 09:21:50 PM
    Quote from: killeriq on December 18, 2017, 09:07:34 PM

    Hello,
    trying to mine Lyra with ccminer, but it just fail to run all the time:
    Code:
    [2017-12-18 22:00:42] Starting on stratum+tcp://xzc.suprnova.cc:1569
    [2017-12-18 22:00:42] NVML GPU monitoring enabled.
    [2017-12-18 22:00:42] 5 miner threads started, using 'lyra2z' algorithm.
    /home.m1/2unix: line 138: 2205 Terminated  bash '/home/m1/3main'
    or
    Code:
    /home.m1/2unix: line 138: 2907 Terminated  bash '/home/m1/3main'
    or
    /home.m1/2unix: line 138: 3554 Terminated  bash '/home/m1/3main'

    Any clue how to fix it? thanks


    What version of nvOC? Are you LOCAL or REMOTE configuration?

    Im on 19-20 and LOCAL, thx

    Please,
    Execute in remote ssh terminal (Or at tty01 (CTRL+ALT+F1)) the nvOC report command and give us here the result by copy/paste
    nvOC file to diagnose is inhome/m1

    Code:
    nvOC report

    Set this to NO in 1 bash

    Code:
    AUTO_START_MINER="NO"      # YES or NO # Set this to NO when troubleshooting, this will prevent the watchdog restarting the rig

    And try to execute or copy paste the minning command without automatic loop of nvOC Like that but in replacing variables :
    Code:
    if [ $COIN == "ZCOIN" ]
    then
      HCD='/home/m1/TPccminer/ccminer'
      ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER"
    [b]  screen -dmSL miner $HCD -a lyra2z -o stratum+tcp://$ZCOIN_POOL:$ZCOIN_PORT -u $ADDR -p $MINER_PWD[/b]
    fi


    Hello, here u go...

    Code:
    root@m1-desktop:~$./nvOC report

          Report generator v0019-2.0.002 by leenoox

    cat:root/1bash: No such file or directory

    [code]

    Software info:
    Report ver    :  v0019-2.0.002
    nvOC (1bash)  :
    nvOC (3main)  :  nvOC v0019-2.0 - Community Release
    1bash ver     :
    3main ver     :  v0019-2.0.005
    5watchdog ver :  v0019-2.0.011
    6tempcontrol v:  v0019-2.0.003
    wtm switch ver:  v0019-2.0.006
    Kernel        :  4.4.0-97-generic
    OS            :  Ubuntu 16.04.3 LTS
    System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
    nvidia driver :  387.34

    Hardware info:
    Motherboard   :  ASUS SABERTOOTH 990FX R2.0  Rev 1.xx
    BIOS ver.     :  2901 05/04/2016
    CPU Model     :  FX(tm)-8350 Eight-Core Processor
    CPU Cores     :  8 (Cores + Threads)
    Mem Total     :        16391036 kB
    Mem Free      :        15123064 kB
    Swap Total    :               0 kB
    Swap Free     :               0 kB
    Ethernet      :  Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 09)

    HDD and Partion info:
    NAME    SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR   MODEL             REV MOUNTPOINT
    sde    28.7G        disk    1       1 usb  SanDisk  Ultra Fit        1.00
    ├─sde1    9M vfat   part    1       1                                     /media/m1/12D3-A8691
    └─sde2 13.7G ext4   part    1       1                                     /

    VGA info:
    01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
    05:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
    06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
    07:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

    1bash settings:
    1bash version .............:
    LOCAL or REMOTE ...........:
    TEAMVIEWER started ........:
    SSH daemon started ........:
    SLOW_USB_KEY_MODE .........:
    SRR .......................:
    Watchdog ..................:

    Temp Control ..............:

    CLEAR_LOGS_ON_BOOT ........:
    AUTO_UPDATE ...............:
    AUTO_REBOOT ...............:
    _Parallax_MODE (upPaste)...:

    TELEGRAM_MESSAGES .:
    TELEGRAM_ALERTS .:

    P106_100_FULL_HEADLESS_MODE:
    GPUPowerMizerMode_Adjust...:
    POWERLIMIT (global) .......:
    CORE_OVERCLOCK (global)....:
    MEMORY_OVERCLOCK (global) .:
    MANUAL_FAN ................:
    ALGO_SPECIFIC_OC ..........:

    GLOBAL_WORKERNAME .........:
    AUTO_WORKERNAME ...........:
    plusCPU ...................:

    ZM_or_EWBF ................:

    COIN ......................:
    ZPOOLPASS .................: hidden_pass...,
    _WORKER ................:
    _ADDRESS ...............: ...
    _POOL ..................:



    WORK IN PROGRESS! Report script (beta release)

    *** If posting the Report on bitcointalk.org forum please copy everything
        between the
    Code:
    and [\code] including the [code] and [\code] tags.
        This will ensure proper alignment when posting the Report.


    root@m1-desktop:/home/m1#


    the code u mention should be pasted here instead or where? i have it probably wrong... Thanks

    Code:
      # ZCOIN lyra2v2
    #  if [ $COIN == "ZCOIN" ]
    #  then
    #    ALGORITHM="LYRA2V2"
    #    POWERLIMIT_WATTS=115
    #    __CORE_OVERCLOCK=100
    #    MEMORY_OVERCLOCK=-200
    #  fi
     
      if [ $COIN == "ZCOIN" ]
    then
      HCD='/home/m1/TPccminer/ccminer'
      ADDR="$ZCOIN_ADDRESS.$ZCOIN_WORKER"
    [b]  screen -dmSL miner $HCD -a lyra2z -o stratum+tcp://$ZCOIN_POOL:$ZCOIN_PORT -u $ADDR -p $MINER_PWD[/b]
    fi
    [/code][/code]



    Did you run the update script with sudo too ?
    If yes please run this (thnx to wi$em@n suggestion)

    Code:
    sudo chown -R m1home/m1
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • samba001
    Full Member
    ***
    Offline Offline

    Activity: 165
    Merit: 100


    View Profile
    December 20, 2017, 08:24:28 AM
     #4999
    I have been using nvOC for more than 4 months and I can confidently say that it made my life very easy. I have enabled auto switch and everything works fine, hardly I connect to my rig once a day to see the progress. So far everything is working great.

    I really appreciate the Dev team for putting so many thoughts and get this working for most of the mining beginners.
    ★ ★ ★ ★ ★   DeepOnion  ✔  Anonymous and Untraceable Cryptocurrency  ✔  TOR INTEGRATED & SECURED   ★ ★ ★ ★ ★
    › › › › ›  JOIN THE NEW AIRDROP ✈️    ★    ✔ VERIFIED WITH DEEPVAULT  ‹ ‹ ‹ ‹ ‹
    ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬   ANN  WHITEPAPER  FACEBOOK  TWITTER  YOUTUBE  FORUM   ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    December 20, 2017, 08:56:52 AM
    Last edit: January 21, 2018, 08:22:29 AM by papampi
     #5000
    SSD-USB resize and add swap - Guide - nvOC-v0019-2.0 Community Release.


    Open Gparted, root password is miner1, Locate your drive, there are 2 partitions, a 9Mb fat, a 16Gb ext4 and a free unused space at the end.

    1- Make swap partition (Skip for USB install)
    Right click on the unused space, create new partition, "Partition Type : Swap" make the size you want (1Gb up to Ram size) grab and move it to the end of drive.
    Apply.

    2- Expand root partition:
    Right click on the primary 16gb partition, resize/move, resize it to the desired size (better to give it all).
    Apply. (skip to step 5 for usb installs)

    3- Applying Swap partition (skip this for USB Installs)

    Right click on the swap partition and get the info, copy the UUID.

    openetc/fstab with this command

    Code:
    gksudo geditetc/fstab

    You will see a line which refers to a swap partition during installation ...

    Some thing similar to this :


    Code:
    #swap was ondev/sda5 during installation
    UUID=cdba7b01-5ae6-4104-9a6e-f723b8bd87ac none            swap    sw              0       0


    Change the UUID with the one you copied from newly made swap partition.

    Save and close gedit.

    Activate swap:

    Code:
    sudo swapon --all

    It will read your fstab and enable the swap partition.

    4- Check swap partition with free command

    Code:
    #free

                 total        used        free      shared  buff/cache   available
                
    Mem:        8171388     3020388     2637404      142044     2513596     4647472

    Swap:       8123388           0     8123388

    5- Check partition size with:

    Code:
    df -h

    reboot


    Edit:
    Its better to skip making swap partition for USB installs.
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره
    Pages: « 1 ... 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 [250] 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 ... 352 »
      Print  
Page 249
Viewing Page: 250

IRLBTC™ © 2025 IRLBTC.com