Bitcointalk Mobile Browser presented by IRLBTC™

<< >> (p.280)

Author

Topic: [ mining os ] nvoc (Read 418569 times)

papampi

Full Member

Offline

Activity: 686
Merit: 140

Linux FOREVER! Resistance is futile!!!

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 17, 2018, 10:26:22 PM

#5581

Quote from: Kieros on January 17, 2018, 10:19:43 PM

Here is the report

Code:

Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.0 - Community Release
nvOC (3main) : nvOC v0019-2.0 - Community Release
1bash ver : v0019-2.0.003
3main ver : v0019-2.0.006
5watchdog ver : v0019-2.0.011
6tempcontrol v: v0019-2.0.003
wtm switch ver: v0019-2.0.0011
Kernel : 4.4.0-97-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver : 387.34

Hardware info:
Motherboard : ASUS B250 MINING EXPERT Rev X.0x
BIOS ver. : 0311 08/19/2017
CPU Model : Pentium(R) CPU G4400 @ 3.30GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3894436 kB
Mem Free : 246460 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V

HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 111.8G disk 0 0 sata ATA KINGSTON SUV400S 96R9
├─sda1 9M vfat part 0 0
└─sda2 13.7G ext4 part 0 0

VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 65
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 50

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 120
CORE_OVERCLOCK (global)....: 100
MEMORY_OVERCLOCK (global) .: 400
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 065
plusCPU ...................: YES
threadCOUNT ...............: 4

ZM_or_EWBF ................: ZM

COIN ......................: DUAL_ETH_PASL
DUAL_ETH_PASL_WORKER ................:
DUAL_ETH_PASL_ADDRESS ...............: ...
DUAL_ETH_PASL_POOL ..................:

WORK IN PROGRESS! Report script (beta release)

*** If posting the Report on bitcointalk.org forum please copy everything
between the

Code:

and

including the

Code:

and [\code] tags.
This will ensure proper alignment when posting the Report.

When gnome terminal starts it should show the OC values and power limit that are applying to cards
Does it shows them on your system?

run

Code:

miner-restart

and check it

nvOC - Community Release - free-easy-to-use Nvidia Mining OS
nvOC - Community Release - GitHub
فروش پیچ و مهره

Kieros

Newbie

Offline

Activity: 5
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 17, 2018, 10:34:04 PM

#5582

I do not think so...

Code:

GPU0 t=57C fan=52%, GPU1 t=53C fan=50%, GPU2 t=63C fan=37%, GPU3 t=63C fan=37%, GPU4 t=60C fan=56%, GPU5 t=56C fan=50%, GPU6 t=56C fan=50%, GPU7 t=55C fan=50%, GPU8 t=58C fan=0%, GPU9 t=56C fan=50%, GPU10 t=65C fan=41%, GPU11 t=59C fan=54%, GPU12 t=64C fan=40%
nvOC v0019-2.0 - Community Release

nvOC v0019-2.0 - Community Release

cpuminer killed (pid 11528)
ethdcrminer64 killed (pid 11892)

00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

Wed Jan 17 15:31:55 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.34 Driver Version: 387.34 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 On | 00000000:01:00.0 Off | N/A |
| 52% 57C P0 45W 120W | 2788MiB 8114MiB | 96% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1070 On | 00000000:04:00.0 Off | N/A |
| 50% 53C P0 44W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1070 On | 00000000:06:00.0 Off | N/A |
| 37% 61C P0 40W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 On | 00000000:08:00.0 Off | N/A |
| 37% 61C P0 47W 115W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 1070 On | 00000000:09:00.0 Off | N/A |
| 56% 58C P0 45W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 1070 On | 00000000:0A:00.0 Off | N/A |
| 50% 56C P0 48W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 6 GeForce GTX 1070 On | 00000000:0B:00.0 Off | N/A |
| 50% 54C P0 44W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 7 GeForce GTX 1070 On | 00000000:0C:00.0 Off | N/A |
| 50% 54C P0 47W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 8 GeForce GTX 1070 On | 00000000:0D:00.0 Off | N/A |
| 51% 56C P0 45W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 9 GeForce GTX 1070 On | 00000000:0E:00.0 Off | N/A |
| 50% 54C P0 44W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 10 GeForce GTX 1070 On | 00000000:0F:00.0 Off | N/A |
| 41% 63C P0 46W 115W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 11 GeForce GTX 1070 On | 00000000:10:00.0 Off | N/A |
| 54% 58C P0 47W 120W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 12 GeForce GTX 1070 On | 00000000:11:00.0 Off | N/A |
| 40% 64C P0 47W 115W | 2485MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 866 G usr/lib/xorg/Xorg 178MiB |
| 0 2390 G compiz 120MiB |
| 0 22451 G usr/bin/nvidia-settings 3MiB |
+-----------------------------------------------------------------------------+

  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:10]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:11]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:12]) assigned value 0.

Power limit for GPU 00000000:01:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:04:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:06:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:08:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:09:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0A:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0B:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0C:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0D:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0E:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0F:00.0 was set to 120.00 W from 115.00 W.
Power limit for GPU 00000000:10:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:11:00.0 was set to 120.00 W from 115.00 W.
All done.

LAUNCHING: plusCPU

plusCPU process in guake terminal Tab (f12)

LAUNCHING: MINER TEMPCONTROL

process in guake terminal Tab (f12), ~/nvOC temp-log

^CnvOC v0019-2.0 - Community Release

nvOC v0019-2.0 - Community Release

cpuminer killed (pid 27568)

00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

Wed Jan 17 15:32:46 2018
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.34 Driver Version: 387.34 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1070 On | 00000000:01:00.0 Off | N/A |
| 50% 48C P0 48W 120W | 305MiB 8114MiB | 78% Default |
+-------------------------------+----------------------+----------------------+
| 1 GeForce GTX 1070 On | 00000000:04:00.0 Off | N/A |
| 0% 51C P0 36W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 2 GeForce GTX 1070 On | 00000000:06:00.0 Off | N/A |
| 33% 53C P0 39W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 3 GeForce GTX 1070 On | 00000000:08:00.0 Off | N/A |
| 31% 52C P0 41W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 4 GeForce GTX 1070 On | 00000000:09:00.0 Off | N/A |
| 51% 48C P0 37W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 5 GeForce GTX 1070 On | 00000000:0A:00.0 Off | N/A |
| 0% 51C P0 36W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 6 GeForce GTX 1070 On | 00000000:0B:00.0 Off | N/A |
| 0% 53C P0 38W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 7 GeForce GTX 1070 On | 00000000:0C:00.0 Off | N/A |
| 0% 54C P0 37W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 8 GeForce GTX 1070 On | 00000000:0D:00.0 Off | N/A |
| 0% 48C P0 35W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 9 GeForce GTX 1070 On | 00000000:0E:00.0 Off | N/A |
| 0% 53C P0 36W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 10 GeForce GTX 1070 On | 00000000:0F:00.0 Off | N/A |
| 36% 54C P0 39W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 11 GeForce GTX 1070 On | 00000000:10:00.0 Off | N/A |
| 51% 48C P0 36W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+
| 12 GeForce GTX 1070 On | 00000000:11:00.0 Off | N/A |
| 37% 55C P0 40W 120W | 2MiB 8114MiB | 0% Default |
+-------------------------------+----------------------+----------------------+

+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 866 G usr/lib/xorg/Xorg 184MiB |
| 0 2390 G compiz 120MiB |
| 0 22451 G usr/bin/nvidia-settings 3MiB |
+-----------------------------------------------------------------------------+

  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:10]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:11]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:12]) assigned value 0.

Power limit for GPU 00000000:01:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:04:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:06:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:08:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:09:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0A:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0B:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0C:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0D:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0E:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0F:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:10:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:11:00.0 was set to 120.00 W from 120.00 W.
All done.

LAUNCHING: plusCPU

plusCPU process in guake terminal Tab (f12)

LAUNCHING: MINER TEMPCONTROL

process in guake terminal Tab (f12), ~/nvOC temp-log

Auto Start Miner Set to YES

LAUNCHING: MINER WATCHDOG

process in guake terminal Tab (f12), ~/nvOC wdog-log

LAUNCHING: MINER


   SCREEN -dmSL minerhome/m1/eth/claymore/latest/ethdcrminer64 -epool eu1.ethermine.org:4444 -ewal 0xecbdb419ecccc82139728c1fd5b9017019cf9ec9.065 -epsw x -dpool stratum+tcp://mine.pasl.fairpool.xyz:4009 -dwal 3GhhbokyR3MABVthVnso9XznZ3h3gMyyRjSKdeypQ2aZSCUKwAcnvB9hRQ8qsYebUfQuquyoyLYoMYeto6pywDPNwEkyYzcuo2SSKu..065 -dpsw x -dcoin pasc -allcoins 1 -allpools 1 -dbg -1

PASC: Stratum - Failed to connect, retry in 20 sec...
ETH: 01/17/18-15:31:36 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 344.830 Mh/s, Total Shares: 148, Rejected: 0, Time: 00:29
ETH: GPU0 26.683 Mh/s, GPU1 26.351 Mh/s, GPU2 26.442 Mh/s, GPU3 26.367 Mh/s, GPU4 26.364 Mh/s, GPU5 26.644 Mh/s, GPU6 26.685 Mh/s, GPU7 26.587 Mh/s, GPU8 26.305 Mh/s, GPU9 26.432 Mh/s, GPU10 26.694 Mh/s, GPU11 26.679 Mh/s, GPU12 26.598 Mh/s
PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
GPU0 t=57C fan=52%, GPU1 t=53C fan=50%, GPU2 t=63C fan=37%, GPU3 t=63C fan=37%, GPU4 t=60C fan=56%, GPU5 t=56C fan=50%, GPU6 t=56C fan=50%, GPU7 t=55C fan=50%, GPU8 t=58C fan=0%, GPU9 t=56C fan=50%, GPU10 t=65C fan=41%, GPU11 t=59C fan=54%, GPU12 t=64C fan=40%
Cannot resolve 'mine.pasl.fairpool.xyz'
PASC: Stratum - Cannot connect to mine.pasl.fairpool.xyz:4009
PASC: Stratum - Failed to connect, retry in 20 sec...

��ͻ
� Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2 �
��ͼ

ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
PASC: 1 pool is specified
Main Pascal pool is mine.pasl.fairpool.xyz:4009
AMD OpenCL platform not found
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool
CUDA initializing...

NVIDIA Cards available: 13
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #1: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #3: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #4: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #5: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #6: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #7: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #8: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #9: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #10: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #11: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #12: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

Total cards: 13
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.239.100> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Authorized
DUAL MINING MODE ENABLED: ETHEREUM+PASCAL
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

Setting DAG epoch #164...
Cannot resolve 'mine.pasl.fairpool.xyz'
PASC: Stratum - Cannot connect to mine.pasl.fairpool.xyz:4009
PASC: Stratum - Failed to connect, retry in 20 sec...
ETH: 01/17/18-15:34:01 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
Setting DAG epoch #164 for GPU0
Setting DAG epoch #164 for GPU1
Create GPU buffer for GPU0
Setting DAG epoch #164 for GPU2
Create GPU buffer for GPU2
Setting DAG epoch #164 for GPU3
Create GPU buffer for GPU3
Setting DAG epoch #164 for GPU5
Create GPU buffer for GPU5
Setting DAG epoch #164 for GPU7
Create GPU buffer for GPU7
Setting DAG epoch #164 for GPU9
Create GPU buffer for GPU9
Setting DAG epoch #164 for GPU11
Setting DAG epoch #164 for GPU12
Create GPU buffer for GPU12
Setting DAG epoch #164 for GPU4
Create GPU buffer for GPU4
Setting DAG epoch #164 for GPU8
Create GPU buffer for GPU8
Create GPU buffer for GPU11
Create GPU buffer for GPU1
Setting DAG epoch #164 for GPU6
Create GPU buffer for GPU6
Setting DAG epoch #164 for GPU10
Create GPU buffer for GPU10
ETH: 01/17/18-15:34:03 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
GPU9 DAG creation time - 7048 ms
Setting DAG epoch #164 for GPU9 done
GPU12 DAG creation time - 7034 ms
Setting DAG epoch #164 for GPU12 done
GPU0 DAG creation time - 7036 ms
Setting DAG epoch #164 for GPU0 done
GPU7 DAG creation time - 7051 ms
Setting DAG epoch #164 for GPU7 done
GPU10 DAG creation time - 7024 ms
Setting DAG epoch #164 for GPU10 done
GPU6 DAG creation time - 7037 ms
Setting DAG epoch #164 for GPU6 done
GPU11 DAG creation time - 7042 ms
Setting DAG epoch #164 for GPU11 done
GPU8 DAG creation time - 7041 ms
Setting DAG epoch #164 for GPU8 done
GPU4 DAG creation time - 7075 ms
Setting DAG epoch #164 for GPU4 done
GPU5 DAG creation time - 7086 ms
Setting DAG epoch #164 for GPU5 done
GPU2 DAG creation time - 7103 ms
Setting DAG epoch #164 for GPU2 done
GPU1 DAG creation time - 7070 ms
Setting DAG epoch #164 for GPU1 done
GPU3 DAG creation time - 7115 ms

killeriq

Newbie

Offline

Activity: 22
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 12:26:59 AM

#5583

Quote from: CryptAtomeTrader44 on January 02, 2018, 03:58:58 PM

To add Verge-Lyra2REv2 (XVG) to the selection of cryptocurrency in the 1bash and therefore also in the WTm switch:

1 add this in the 1bash (just below the VTC variables you will copy paste as a template):

Code:

# Verge-Lyra2REv2(XVG)
# ## No Need to add stratum+tcp:// to server address
XVG_WORKER="$WORKERNAME"
XVG_ADDRESS="Your_XVG_ADDRESS" # Bittrex Wallet Address (for me)
XVG_POOL="lyra2v2.mine.zpool.ca" # 1.75% fee but i think this pool is more reliable than other. If you find better, i want it.
XVG_PORT="4533"
XVG_INTENSITY="21"

Add this to the 0miner scrypt file (in the same way below the command to launch the VTC ccminer (and you can copy VTC but be careful to replace VTC_ by XVG_ in the whole command):

Code:

if [ $COIN == "XVG" ]
then
HCD='/home/m1/ASccminer/ccminer'
ADDR="$XVG_ADDRESS.$XVG_WORKER"
screen -dmSL miner $HCD -a lyra2v2 -o stratum+tcp://$XVG_POOL:$XVG_PORT -u $ADDR -p c=XVG -i $XVG_INTENSITY
fi

Finally, because there is more algo to mine XVG Coin, You have to disable the algo Groestl in your Whtatomine selection because in its GPU list, the WTM site lists both the XVG-Groestl and XVG-Lyra2Rev2 which makes a problem with the WTM_SWITCHER python script (need some modifications for multialgo coins recognization and listanng) ...

It will be a small change like NIcehash previously posted on this thread to filter correctly the difference but I have not enough time tonight to make this change and test.
Needless to say that if you mine another Goestl algo coins, you can't disable it in wtm page URL ! Thus, think carefully about what you choose to do and decide whether or not to mine XVG in place of Groestl according to the best profit

To disable this algo in the WTM list, just click on the blue button dedicated to this algorithm and proceed as usual with the Whattomine URL by adding the .json just behind https://whattomine.com/coins after you have made your request in your browser.

To consult your pool balance : http://www.zpool.ca/?address=Your_XVG_ADDRESS

NB: if you think there is a better ccminer than alexis for lyra2rev2, I'm interested. Same for better pool.

EDIT : Other pools possibility :
https://www.ahashpool.com/ => fee 1%
http://pool.hashrefinery.com/ => fee 1.25%

seems like you missed setting for Algo specific OC

like this maybe?

Code:

# lyra2vRev2
if [ $COIN == "MONA" -o $COIN == "VTC" -o $COIN == "XVG" ]
then
ALGORITHM="LYRA2REV2"
POWERLIMIT_WATTS=125
__CORE_OVERCLOCK=135
MEMORY_OVERCLOCK=-1200

Also getting this error: 'c=XVG' what is it? doesnt look right...

Code:

root@m1-desktop:~$./nvOC miner-log

*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.

/home/m1/ASccminer/ccminer: unsupported non-option argument 'c=XVG' (see --help)
[2018-01-18 01:25:21] Starting on stratum+tcp://xvg-lyra.suprnova.cc:2595
[2018-01-18 01:25:22] NVML GPU monitoring enabled.
[2018-01-18 01:25:22] 12 miner threads started, using 'lyra2v2' algorithm.
[2018-01-18 01:25:22] Stratum difficulty set to 32 (0.12500)
[2018-01-18 01:25:34] GPU#3:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#0:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#7:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#11:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#1:Intensity set to 21, 2097152 cuda threads

leenoox

Full Member

Offline

Activity: 200
Merit: 101

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 03:38:14 AM

#5584

Quote from: Kieros on January 17, 2018, 10:19:43 PM

Here is the report

Code:

Software info:
Report ver : v0019-2.0.002
nvOC (1bash) : nvOC v0019-2.0 - Community Release
nvOC (3main) : nvOC v0019-2.0 - Community Release
1bash ver : v0019-2.0.003
3main ver : v0019-2.0.006
5watchdog ver : v0019-2.0.011
6tempcontrol v: v0019-2.0.003
wtm switch ver: v0019-2.0.0011
Kernel : 4.4.0-97-generic
OS : Ubuntu 16.04.3 LTS
System : (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver : 387.34

Hardware info:
Motherboard : ASUS B250 MINING EXPERT Rev X.0x
BIOS ver. : 0311 08/19/2017
CPU Model : Pentium(R) CPU G4400 @ 3.30GHz
CPU Cores : 2 (Cores + Threads)
Mem Total : 3894436 kB
Mem Free : 246460 kB
Swap Total : 0 kB
Swap Free : 0 kB
Ethernet : Intel I219-V

HDD and Partion info:
NAME SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR MODEL REV MOUNTPOINT
sda 111.8G disk 0 0 sata ATA KINGSTON SUV400S 96R9
├─sda1 9M vfat part 0 0
└─sda2 13.7G ext4 part 0 0 /

VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 65
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 50

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 120
CORE_OVERCLOCK (global)....: 100
MEMORY_OVERCLOCK (global) .: 400
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 065
plusCPU ...................: YES
threadCOUNT ...............: 4

ZM_or_EWBF ................: ZM

COIN ......................: DUAL_ETH_PASL
DUAL_ETH_PASL_WORKER ................:
DUAL_ETH_PASL_ADDRESS ...............: ...
DUAL_ETH_PASL_POOL ..................:

WORK IN PROGRESS! Report script (beta release)

*** If posting the Report on bitcointalk.org forum please copy everything
between the

Code:

and

including the

Code:

and [\code] tags.
This will ensure proper alignment when posting the Report.

You have the on-board video enabled which causes lots of problems. Enter the bios and disable it. Connect your monitor to the GPU that is installed in the x16 (long) slot.

nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
nvOC - V0019-2.0 Community Release

leenoox

Full Member

Offline

Activity: 200
Merit: 101

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 03:41:23 AM

#5585

Quote from: papampi on January 17, 2018, 09:34:24 PM

Quote from: barista1992 on January 17, 2018, 08:36:20 PM

Hello, guys!

Need your help

mother - asus b250 mining expert
GPU - nvidia 1060 (6 gb) dual
memory - 8 gb
nvOC - 19.1-4

It should pass, if not force reboot the rig.
Its checking the SSD/USB.

Wow, haven't seen one of those monitors in a while Wink

nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
nvOC - V0019-2.0 Community Release

car1999

Full Member

Offline

Activity: 350
Merit: 100

Re: SSD-USB resize guide - nvOC-v0019-2.0 Community Release.

January 18, 2018, 05:13:23 AM

#5586

Quote from: cryptokingjr on January 16, 2018, 09:04:01 PM

Quote from: papampi on January 16, 2018, 05:28:30 PM

Quote from: cryptokingjr on January 16, 2018, 02:54:46 PM

Quote from: papampi on December 20, 2017, 08:56:52 AM

SSD-USB resize and add swap - Guide - nvOC-v0019-2.0 Community Release.

Open Gparted, root password is miner1, Locate your drive, there are 2 partitions, a 9Mb fat, a 16Gb ext4 and a free unused space at the end.

Right click on the unused space, create new partition, "Partition Type : Swap" make the size you want (1Gb up to Ram size) grab and move it to the end of drive. Apply.

Right clcik on the primary 16gb partition, resize/move, resize it to the desired size (better to give it all). Apply.

Right click on the swap partition and get the info, copy the UUID.

openetc/fstab with this command

Code:

gksudo geditetc/fstab

You will see a line which refers to a swap partition during installation ...

Some thing similar to this :

Code:

#swap was ondev/sda5 during installation
UUID=cdba7b01-5ae6-4104-9a6e-f723b8bd87ac none swap sw 0 0

Change the UUID with the one you copied from newly made swap partition.

Save and close gedit.

Activate swap:

Code:

sudo swapon --all

It will read your fstab and enable the swap partition.

Check it with free command in terminal

Code:

#free

total used free shared buff/cache available

Mem: 8171388 3020388 2637404 142044 2513596 4647472

Swap: 8123388 0 8123388

Check partition size with

Code:

df -h

reboot

I was wondering if I was suppose to do the same when I'm actually using an HDD. It's not working, I'm not able to update! Can you help me ?

It should work on all HDD/SSD/USB
Some where you make a mistake, read and go through again.

Maybe I don't undestand where i should load the file ?

I'm just gonna tell you how I did it :

I load the File on gdrive.

Then I run the :

cdhome/m1/Downloads
wget https://www.dropbox.com/s/cyo86xoqotplges/nvOC-19-2-update
bashhome/m1/Downloads/nvOC-19-2-update

Then I change de 1bash file that been load and try to resize

and the error is :

(gedit:3854): Gtk-WARNING **: Calling Inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files

** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-spell-enabled not supported

** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-encoding not supported

** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-position not supported

NEVER MIND

It finally worked. I just forget to turn on the swap on gparted

Thanks @PAPAMPI

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Kieros

Newbie

Offline

Activity: 5
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 06:16:20 AM

#5587

Quote from: leenoox on January 18, 2018, 03:38:14 AM

Quote from: Kieros on January 17, 2018, 10:19:43 PM

Here is the report

Code:

WORK IN PROGRESS! Report script (beta release)

*** If posting the Report on bitcointalk.org forum please copy everything
between the

Code:

and

including the

Code:

and [\code] tags.
This will ensure proper alignment when posting the Report.

You have the on-board video enabled which causes lots of problems. Enter the bios and disable it. Connect your monitor to the GPU that is installed in the x16 (long) slot.

Thank you I will try this ASAP and let you know if it worked. However there is no monitor connected at all does it matter?

papampi

Full Member

Offline

Activity: 686
Merit: 140

Linux FOREVER! Resistance is futile!!!

Re: SSD-USB resize guide - nvOC-v0019-2.0 Community Release.

January 18, 2018, 06:46:01 AM
Last edit: January 18, 2018, 08:31:56 AM by papampi

#5588

Quote from: car1999 on January 18, 2018, 05:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

nvOC - Community Release - free-easy-to-use Nvidia Mining OS
nvOC - Community Release - GitHub
فروش پیچ و مهره

mtx_demon

Full Member

Offline

Activity: 273
Merit: 100

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 08:45:49 AM

#5589

Do you guys already have ccminer KlausT??

LuKePicci

Jr. Member

Offline

Activity: 128
Merit: 1

Re: SSD-USB resize guide - nvOC-v0019-2.0 Community Release.

January 18, 2018, 10:04:01 AM

#5590

Quote from: papampi on January 18, 2018, 06:46:01 AM

Quote from: car1999 on January 18, 2018, 05:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

papampi

Full Member

Offline

Activity: 686
Merit: 140

Linux FOREVER! Resistance is futile!!!

Re: SSD-USB resize guide - nvOC-v0019-2.0 Community Release.

January 18, 2018, 10:25:08 AM

#5591

Quote from: LuKePicci on January 18, 2018, 10:04:01 AM

Quote from: papampi on January 18, 2018, 06:46:01 AM

Quote from: car1999 on January 18, 2018, 05:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

Testing the options now
I'm creating a smaller 12Gb from v0019-2.0 with auto expand to test on some SSD/USB
Couldn't go bellow that size yet, gparted was giving error.

Will make an image from system partition as your suggestion later too.

nvOC - Community Release - free-easy-to-use Nvidia Mining OS
nvOC - Community Release - GitHub
فروش پیچ و مهره

leenoox

Full Member

Offline

Activity: 200
Merit: 101

Re: SSD-USB resize guide - nvOC-v0019-2.0 Community Release.

January 18, 2018, 11:26:21 AM

#5592

Quote from: papampi on January 18, 2018, 10:25:08 AM

Quote from: LuKePicci on January 18, 2018, 10:04:01 AM

Quote from: papampi on January 18, 2018, 06:46:01 AM

Quote from: car1999 on January 18, 2018, 05:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

There are some options that need to be loaded in grub (boot loader). Providing just system partition will complicate things a bit... you will have to manually edit grub config afterwards. Auto resize will be much better option.

nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
nvOC - V0019-2.0 Community Release

mtx_demon

Full Member

Offline

Activity: 273
Merit: 100

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 11:50:10 AM

#5593

So When I start KTccminer I get a msg the out of memory
do you guys know about it?

LuKePicci

Jr. Member

Offline

Activity: 128
Merit: 1

Re: SSD-USB resize guide - nvOC-v0019-2.0 Community Release.

January 18, 2018, 01:53:09 PM

#5594

Quote from: leenoox on January 18, 2018, 11:26:21 AM

Quote from: papampi on January 18, 2018, 10:25:08 AM

Quote from: LuKePicci on January 18, 2018, 10:04:01 AM

Quote from: papampi on January 18, 2018, 06:46:01 AM

Quote from: car1999 on January 18, 2018, 05:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

There is no separate boot partition from what I see in the provided full disk image so I think there is nothing regarding grub outside the main partition except from the first part of grub loader binary written in the MBR, i think that using the partition image for same version reimaging and not for upgrading or fresh install is possibile without so much hassle. Auto expand is fine but my concern was about the possibility of rewrite the nvOC partition even if there are other os in the drive. Moreover, if the other os is still a Linux os will be pretty easy for a mid-skilled guy to just add an entry in its grub.cfg to boot from the nvOC partition, and this will work flawlessly even in case of nvOC upgrades fresh installations since the MBR part of grub that will be used is still pointing to the main/other os grub binaries, so the boot loader and configuration of nvOC will be totally bypassed. Of course if there are any customization in the grub.cfg of nvOC there should be copied also in the added section to the main and actually in use customized grub.cfg file in the boot partition.

nocc

Newbie

Offline

Activity: 1
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 04:55:09 PM

#5595

Welcome guys!
I installed it today nvos and got problem with config. Namely, after setting in config COIN="ETH" and after starting the system, it starts up from ZEC. Where can be a problem?

damNmad

Full Member

Offline

Activity: 378
Merit: 104

nvOC forever

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 05:59:22 PM

#5596

Quote from: mtx_demon on January 18, 2018, 11:50:10 AM

So When I start KTccminer I get a msg the out of memory
do you guys know about it?

Lower your Overclock settings and try to put the intensity at 20 and then slowly improve it step by step to get the best OC settings suits your card.

BTW what cards you are using? What coin you trying to mine?

Let us know, if you still need help.

Good Luck.

DeepOnion ▬▬ Anonymous and Untraceable ▬▬ ENJOY YOUR PRIVACY JOIN DEEPONION
▐▐▐▐▐▐▐▐ ANN Whitepaper Facebook Twitter Telegram Discord ▌▌▌▌▌▌▌▌
Get $ONION (✔Cryptopia ✔KuCoin) | VoteCentral Register NOW! | Download DeepOnion

damNmad

Full Member

Offline

Activity: 378
Merit: 104

nvOC forever

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 06:02:44 PM

#5597

Quote from: nocc on January 18, 2018, 04:55:09 PM

Welcome guys!
I installed it today nvos and got problem with config. Namely, after setting in config COIN="ETH" and after starting the system, it starts up from ZEC. Where can be a problem?

Have you set the coin on windows system? I mean on the copy you find just after flashing the OS?

Open the 8/9 MB drive (not sure what to call it?) on your RIG, copy the 1bash to home folder (can do it using GUI).

To apply any further changes, edit the 1bash under home folder and simply restart the mining (press Ctrl + c when on terminal) and it will apply the changes you've made.

mtx_demon

Full Member

Offline

Activity: 273
Merit: 100

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 06:28:37 PM

#5598

I change the intensity but still

ccminer 8.15-KlausT (64bit) for nVidia GPUs
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 8.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

[2018-01-18 11:26:27] NVML GPU monitoring enabled.
[2018-01-18 11:26:27] Intensity set to 20, 1048576 cuda threads
1
0
[2018-01-18 11:26:27] 6 miner threads started, using 'neoscrypt' algorithm.
[2018-01-18 11:26:27] Starting Stratum on stratum+tcp://pool.cryptopros.us:4233
[2018-01-18 11:26:27] Stratum difficulty set to 32
[2018-01-18 11:26:30] GPU #3: waiting for data
[2018-01-18 11:26:30] GPU #2: waiting for data
[2018-01-18 11:26:30] GPU #4: waiting for data
[2018-01-18 11:26:30] GPU #1: waiting for data
[2018-01-18 11:26:30] GPU #5: waiting for data
[2018-01-18 11:26:30] GPU #0: waiting for data
[2018-01-18 11:26:32] pool.cryptopros.us:4233 neoscrypt block 52033
Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1432 : out of memory.
Cuda error in func 'scanhash_neoscrypt' at line 41 : driver shutting down.

Kieros

Newbie

Offline

Activity: 5
Merit: 0

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 06:35:12 PM

#5599

Thanks guys for your help! It was indeed the problem with the onboard card where I put the hdmi in. I could not disable it in bios.
But just moving one of the cards into the long pcie socket with the card riser and restored the xorg.conf files did the trick.
It also fixed the rebooting problem on start in 5 seconds.
And OC working!

Thanks!

Stubo

Member

Offline

Activity: 224
Merit: 13

Re: [OS] nvOC easy-to-use Linux Nvidia Mining v0019-1.4

January 18, 2018, 06:53:30 PM

#5600

Quote from: mtx_demon on January 18, 2018, 06:28:37 PM

A quick web search revealed this:

https://github.com/KlausT/ccminer/issues/119

So, perhaps intensity is too high. Hope it helps.

Pages: « 1 ... 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 [280] 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 ... 352 »

Page 279

Viewing Page: 280