Did they died because of the Driver update issue??

Were you using the nvOC of version 19-1.3 or the version older than 19-1.3??

If this is the error you are having, I will post some solutions which were used last time when we had this issue.



This issue has been fixed from 19-1.4 and in the later versions too. I would recommend you to upgrade your RIG to the 2.0 version (where number of issues are dealt with).

Hope it helps.

I just downloaded 19-2.0. The .img file size is 16.01Gb. So I think it's not capable with 16Gb drive.

I created the image on a sandisk cruzer 16Gb
Some usb sticks has smaller or larger filesystem, try other brands or save yourself lots of trouble and get a 40Gb SSD for less than 30$

Well i have several 60gb ssd , but if i need to re-image it's more time consuming than just swapping an usb


What minimum mining time do you have?

Also do you use telegram service, if so what settings you have ?

Oh and I didn't realise you are papampi xD , thanks for you contributions to this wonderfull OS!

Hi,

Does nvOC have a setting for auto shutdown when a certain temperature is reached on any of the video cards?
Thanks.

Hi Papampi, Hi all,

I've rig with 019 1.3, Motherboard : M250-mining edition, and 106-100 16xGPU's
It's running normally till the driver upgrade issue. So, made a fresh install of 2.0
But during the first boot my screen still remains black, I can see only ubuntu load, drive check with blocks and black screen. On this Mobo monitor connection is with HDMI port. On GPU's no monitor connection port, you can connect if you will remove first panel etc., but now I can't do it.
Also when I logged in with ssh and run 2unix, I saw this error in terminal:
-----------------------------------------------------------
m1@m1-desktop:~$ bashhome/m1/2unix
nvOC v0019-2.0 - Community Release

 nvOC v0019-2.0 - Community Release


/usr/lib/python2.7/dist-packages/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
  warnings.warn(str(e), _gtk.Warning)
/usr/lib/python2.7/dist-packages/keybinder/__init__.py:26: GtkWarning: IA__gdk_keymap_get_for_display: assertion 'GDK_IS_DISPLAY (display)' failed
  from _keybinder import *
/usr/lib/python2.7/dist-packages/keybinder/__init__.py:26: GtkWarning: IA__gdk_screen_get_root_window: assertion 'GDK_IS_SCREEN (screen)' failed
  from _keybinder import *

** (main.py:8165): WARNING **: keybinder_init: Unable to open display

(guake:8165): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Traceback (most recent call last):
  File "/usr/lib/python2.7/runpy.py", line 174, in _run_module_as_main
    "__main__", fname, loader, pkg_name)
  File "/usr/lib/python2.7/runpy.py", line 72, in _run_code
    exec code in run_globals
  File "/usr/lib/python2.7/dist-packages/guake/main.py", line 239, in <module>
    exec_main()
  File "/usr/lib/python2.7/dist-packages/guake/main.py", line 230, in exec_main
    if not test_gconf():
  File "/usr/lib/python2.7/dist-packages/guake/common.py", line 52, in test_gconf
    return c.dir_exists('/apps/guake')
glib.GError: No D-BUS daemon running

-------------------------------------------------

Please support.


 

First tell me why you want to start 2unix manually?
2unix only start 3main.
Since you have only p106 you should run full headless, right?


So start the rig, check if 3main is running or not
Then check if miner, watchdog, temp ,... running or not

Hi,
thanks for soon response.

I have start the rig and no GUI are seen. So, I logged in with ssh and check does the miner starts or not. So, it's not started. that's why I want to check wha't going there.


Below are command:

m1@m1-desktop:~$ ps ax | grep 3main
 2132 pts/0    S+     0:00 grep --color=auto 3main


m1@m1-desktop:~$ ps ax | grep -i screen
 2164 pts/0    S+     0:00 grep --color=auto -i screen


Since you have only p106 you should run full headless, right?

Yes. and it's configured as 'YES'

As far as i know Suprnova not supports anonymous mining. You need a account and you need to create the workers first on their website. Without the right worker you can not mine on Suprnova.