Can't get nvOC 1Bash file config for my zenminer to work.  Im filling out these fields wrong somehow and the miner continuously reboots after several failed attemps (its been running perfect for weeks I'm just sick of Luckpool).  If this was my info, how would I properly fill out the fields below:

Workername created in Suprnova:  zenworker
Email used to create Suprnova account:  MattCryptoAcct@gmail.com
Username on Suprnova:  theDwiz
Password:  password1  (its not, but just for the example)

#ZEN
ZEN_WORKER=
ZEN_ADDRESS= "  "
ZEn_POOL="  "
ZEN_PORT="  "

Ive tried researching around, got attempted help on Discord, and searched some YouTube videos and I feel like I'm just missing something stupid. Would really appreciate the proper way to fill out the fields so I can connect to the pool.  Thanks in advance!

1. don't think the OC is the problem (+100 mhz on GPU and +0 on VRAM), but will try without any OC, again
2. don't have any ssd available right now, but did try with other hdd and got the same error  
3. did replaced sata data cable, but will do replace power cable tommorow
4. will do it, again(!)

But, why fsck can not repair journal error? Could it be because the Ubuntu is not installed from scratch but hdd was reimaged with NVOC?

BTW my rigs was doing just fine for first 7-8 days! But after that, I get the error every 24 hours or less.

Sooo how do I update it manually?

I downloaded from the google drive and copied the file into the main folder and every time I click the terminal it just wants to mine.

   Running Claymore I used to be able to use the keyboard commands 0-9 and s for stats. Now they just print to the window I am in and no effect. Is this to be permanent? Sure was helpful.

thay

Open Gparted, root password is miner1, Locate your drive, there are 2 partitions, a 9Mb fat, a 16Gb ext4 and a free unused space at the end.

Right click on the unused space, create new partition, "Partition Type : Swap" make the size you want (1Gb up to Ram size) grab and move it to the end of drive. Apply.

Right clcik on the primary 16gb partition, resize/move, resize it to the desired size (better to give it all). Apply.

Right click on the swap partition and get the info, copy the UUID.

openetc/fstab with this command


You will see a line which refers to a swap partition during installation ...

Some thing similar to this :




Change the UUID with the one you copied from newly made swap partition.

Save and close gedit.

Activate swap:


It will read your fstab and enable the swap partition.

Check it with free command in  terminal


Check partition size with


reboot

I started using this OS. Thanks to the creators, it's very convenient!

There are several questions:
1. What is the correct order of actions and commands after writing changes to 1bash? What should I enter to restart the miner?
2. How to search for the reasons that he does not see 8 cards from 1 card?
3. Now after an hour of work, the system swears on the dag file of the claymore miner, in Windows I treated it with an increase in the paging file. And what to do here?
4. When I try to log in through the monitor, not ssh, everything stops and hangs and goes into reboot

Since today I see gpu utilization of 0 for all gpus although i can see them mining with screen and nvidia-smi. Reboot doesnt help. 0019v2.0

Br

2018-01-16 01:25:51 PM|gpu_id 0 52 0 the launch timed out and was terminated
2018-01-16 01:25:51 PM|gpu 0 unresponsive - check overclocking
2018-01-16 01:25:51 PM|cudaMemcpy 1 failed