<<  >> (p.269)
    Author Topic: [ mining os ] nvoc  (Read 418569 times)

    • clixsenseinc
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    January 08, 2018, 01:59:10 PM
     #5361
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.

    http://prntscr.com/hxlf0w

    http://prntscr.com/hxlfjm

    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

  • Stubo
    Member
    **
    Offline Offline

    Activity: 224
    Merit: 13


    View Profile
    January 08, 2018, 02:17:04 PM
     #5362
    Quote from: clixsenseinc on January 08, 2018, 01:59:10 PM
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.





    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

    This appears to be a DNS or internet access issue given the errors. Can you ping your pool?

  • WaveFront
    Member
    **
    Offline Offline

    Activity: 126
    Merit: 10


    View Profile
    January 08, 2018, 02:42:15 PM
     #5363
    Quote from: wi$em@n on January 08, 2018, 07:29:45 AM
    Quote from: WaveFront on January 06, 2018, 05:43:05 PM
    Quote from: papampi on January 06, 2018, 04:31:46 PM
    Quote from: WaveFront on January 06, 2018, 04:17:50 PM
    Quote from: papampi on January 06, 2018, 09:54:58 AM
    Quote from: WaveFront on January 06, 2018, 09:37:49 AM
    Quote from: kk003 on January 05, 2018, 03:27:30 PM
    Quote from: WaveFront on January 05, 2018, 12:06:06 PM
    Quote from: kk003 on January 05, 2018, 11:59:04 AM
    Quote from: WaveFront on January 05, 2018, 04:18:29 AM
    Hello,
    I built a very crude SRR circuitry for a Raspberry Pi to remotely reset a rig or switch it on/off (The raspberry Pi basically controls an optocoupler connected to the reset and poweron pins of the mobo).
    For the moment the Raspberry Pi just detect if port 22 is open on the rig. If not, it assumes that the rig is not reachable by SSH and reset the rig.

    I see that there is an SRR scrips on nvOC, that looks much more sophisticated than what I am doing. Unfortunately there is no mention of the watchdog software to run on the Raspberry Pi.
    Anyone can give me a pointer to the software to run on the Raspberry Pi.

    Cheers


    I have some code to share with you but the site is blocking my input.
    Trying to contact with an admin about.
    Thanks :-) Maybe you can post a link outside this forum

    Ok, have a look at this and see if can help:
    https://bt.irlbtc.com/view/1854250.msg22615430#msg22615430

    I don't use Nvoc's temp control.

    Here the latest version of script (removed reset bit and add var to use/not to use telegram alerts. I did not test the telegram bit so be aware):
    https://pastebin.com/mcqmt9CF

    It is possible to add code to nvoc's temp control (or wdog) and reset/poweroff/on the rig from a raspberry pi.
    I just look forward to have a well configured rig and make it work stable instead of using wdog.
    I do not trust wdog not because of the coders/scripts but because of so many gpus and drivers (from time to time they change the output of error codes, etc).
    Hi kk003,

    This is awsome!! I will modify the code according the my setup.
    As far as I can see from a quick look at the the code, the script assumes a rig is frozen if it doesn't respond to pings. Is it correct?
    In the past I had rigs that were clearly frozen, but were still responding to pings. That is why, instead of pinging I check if the SSH port is open on the rig using netcat:

    Code:
    nc -z -v -w5 $rigIP 22

    (w5 is a timeout of 5 seconds)

    Thanks again :-)

    Since we are on RPi talks ...
    How many rigs can be monitored and reboot/reset/hard reboot with one RPi?
    What are the hardwares needed for multiple rig control?

    I'm not much of a hardware guy but love to make a rig controller with RPi if its not too hard.
    Hi Papampi,
    A Raspberry Pi 2B or 3B has up to 26 programmable digital pins (the original Raspberry Pi B has only 17).
    You could connect each digital output to an optocoupler or a relay and control the power swithch and/or the reset button of the motherboard.
    Suppose that you want to want to control both switch and reset of each mobo, that would make that you could monitor up to 13 mobo (26 if you just want to control the reset switch).

    You can also connect digital temperature sensors to the pins (programming them in input mode).
    You can find pretty inexpensive ready made relay boards with up to 16 relays.

    In practice the hardware needed for for controlling 12 mobos would be:
    1) 16 relay module. There are many on Amazon, for example https://www.amazon.com/SainSmart-101-70-103-16-Channel-Relay-Module/dp/B0057OC66U
    2) 8 relay module.
    3) Usb power supply
    4) Optional external HDMI screen, unless you are running the RPi headless through SSH
    5) Of course, a raspberry Pi
    6) Plenty of cables with female Dupont connectors

    The standard OS for the Raspberry Pi is Debian (Raspbian), but if you prefer you can have as well Ubuntu or Windows 10 IoT.
    The advantage of Raspbian is that it comes with all the utilities for controlling directly the GPIO pins, either from Bash or a high level language like C++ or Python.


    Awesome, Thanks a lot for the info
    I have 3 RPi 2B that dont use any more because when 3B came out I replaced them for faster kodi
    So I'm going to get a relay module and start playing with it, for sure I'm going to ask for more help on programming and connecting the relay to the board and ...

    Thanks a lot mate
    Keep calm and carry on mining Wink
    No problems ;-)
    Just a thing, do not buy the board that I put in the link of my previous message. I justs realised that the inputs are for 5V signals while what you need is a board compatible with 3.3V signals. Look for a board that is specifically designed for the RPi.

    I have 2 16-Channel Relay Modules with 5v, they work OK. One of them is 5v powered and another 12v powered, and I had to add 12v power supply for the second relay, so now the Rpi3 is powered by the second relay and doesn't need 3) Usb power supply and the first relay is powered by Rpi3.
    Hi wi$em@n,
    If we are going to use the RPi3 just to control the reset and the power switch, a relay is probably overkill. You can acheive the same results with just a simple optocoupler, with the advantage that the current draw is minimal. In other words with an optocoupler board you won't need an external power supply.
    I am building the board right now. As soon as this is done and tested I will publish schematics and software :-)

  • clixsenseinc
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    January 08, 2018, 03:46:28 PM
     #5364
    Quote from: Stubo on January 08, 2018, 02:17:04 PM
    Quote from: clixsenseinc on January 08, 2018, 01:59:10 PM
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.

    http://prntscr.com/hxlf0w

    http://prntscr.com/hxlfjm

    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

    This appears to be a DNS or internet access issue given the errors. Can you ping your pool?

    Your right, no internet. I have an IP from the router but cannot do anything. I even attempted to assign a manual IP and no go. What else should I check?

  • mediaboy
    Newbie
    *
    Offline Offline

    Activity: 16
    Merit: 0


    View Profile
    January 08, 2018, 03:51:02 PM
     #5365
    What version of ethminer does nvOC have in v0019? I am not running nvOC yet just evaluating my options for now.

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    January 08, 2018, 03:58:07 PM
     #5366
    Quote from: clixsenseinc on January 08, 2018, 03:46:28 PM
    Quote from: Stubo on January 08, 2018, 02:17:04 PM
    Quote from: clixsenseinc on January 08, 2018, 01:59:10 PM
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.





    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

    This appears to be a DNS or internet access issue given the errors. Can you ping your pool?

    Your right, no internet. I have an IP from the router but cannot do anything. I even attempted to assign a manual IP and no go. What else should I check?

    Upgrade to v0019-2.0, it has better internet check to prevent miner restart and rig start
    And soon pool watch will be added too
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • clixsenseinc
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    January 08, 2018, 04:13:11 PM
     #5367
    Quote from: papampi on January 08, 2018, 03:58:07 PM
    Quote from: clixsenseinc on January 08, 2018, 03:46:28 PM
    Quote from: Stubo on January 08, 2018, 02:17:04 PM
    Quote from: clixsenseinc on January 08, 2018, 01:59:10 PM
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.

    http://prntscr.com/hxlf0w

    http://prntscr.com/hxlfjm

    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

    This appears to be a DNS or internet access issue given the errors. Can you ping your pool?

    Your right, no internet. I have an IP from the router but cannot do anything. I even attempted to assign a manual IP and no go. What else should I check?

    Upgrade to v0019-2.0, it has better internet check to prevent miner restart and rig start
    And soon pool watch will be added too

    Thanks but I need internet to run the update. I mounted a second usb but without internet I cannot run the update.

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    January 08, 2018, 04:30:48 PM
     #5368
    Quote from: clixsenseinc on January 08, 2018, 04:13:11 PM
    Quote from: papampi on January 08, 2018, 03:58:07 PM
    Quote from: clixsenseinc on January 08, 2018, 03:46:28 PM
    Quote from: Stubo on January 08, 2018, 02:17:04 PM
    Quote from: clixsenseinc on January 08, 2018, 01:59:10 PM
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.





    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

    This appears to be a DNS or internet access issue given the errors. Can you ping your pool?

    Your right, no internet. I have an IP from the router but cannot do anything. I even attempted to assign a manual IP and no go. What else should I check?

    Upgrade to v0019-2.0, it has better internet check to prevent miner restart and rig start
    And soon pool watch will be added too

    Thanks but I need internet to run the update. I mounted a second usb but without internet I cannot run the update.

    Restart your router and rig. That usually restores internet connection.
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • clixsenseinc
    Newbie
    *
    Offline Offline

    Activity: 7
    Merit: 0


    View Profile
    January 08, 2018, 04:47:05 PM
     #5369
    Quote from: leenoox on January 08, 2018, 04:30:48 PM
    Quote from: clixsenseinc on January 08, 2018, 04:13:11 PM
    Quote from: papampi on January 08, 2018, 03:58:07 PM
    Quote from: clixsenseinc on January 08, 2018, 03:46:28 PM
    Quote from: Stubo on January 08, 2018, 02:17:04 PM
    Quote from: clixsenseinc on January 08, 2018, 01:59:10 PM
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.

    http://prntscr.com/hxlf0w

    http://prntscr.com/hxlfjm

    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

    This appears to be a DNS or internet access issue given the errors. Can you ping your pool?

    Your right, no internet. I have an IP from the router but cannot do anything. I even attempted to assign a manual IP and no go. What else should I check?

    Upgrade to v0019-2.0, it has better internet check to prevent miner restart and rig start
    And soon pool watch will be added too

    Thanks but I need internet to run the update. I mounted a second usb but without internet I cannot run the update.

    Restart your router and rig. That usually restores internet connection.

    I have done that many times. Tried dhcp and static but it's just not working. It doesn't make sense. Changed cat 5 cables too. I can ping the gateway but if I try to ping yahoo.com or pull up Firefox and go to google.com it fails.

  • wi$em@n
    Newbie
    *
    Offline Offline

    Activity: 46
    Merit: 0


    View Profile
    January 08, 2018, 04:48:16 PM
    Last edit: January 08, 2018, 05:17:02 PM by wi$em@n
     #5370
    Quote from: Stubo on January 08, 2018, 01:11:30 PM
    Quote from: l4ncel0t on January 08, 2018, 12:18:21 PM
    Quote from: Stubo on January 08, 2018, 10:48:05 AM
    Quote from: wi$em@n on January 08, 2018, 08:37:03 AM
    Guys, can you make a version of nvOC with Nvidia driver 384.90, because this is the last version of driver to work correctly with power limit for 1050ti?

    You can just apply the latest updates yourself. This command should patch your Ubuntu installation:

    Code:
    sudo -- sh -c 'apt-get update; apt-get upgrade -y; apt-get dist-upgrade -y; apt-get autoremove -y; apt-get autoclean -y

    Edit: If you do this, be sure to shutdown the nvOC processes (watchdog in particular) properly or else you run the risk of having the machine reboot in the middle of applying patches. For nvOC 19-2.0, the command to stop everything is:

    Code:
    ./nvOC stop

    Thanks.

    This is fine for upgrading the version but if i understand it right it's look like he want to downgrade.

    warning, make a backup, if something go wrong you could be unable to boot.

    Code:
    ./nvOC stop
    sudo apt-get install nvidia-384

    Then reboot





    Oh. My bad. I had assumed upgrade because no driver that I had heard of works properly with the 1050:

    https://devtalk.nvidia.com/default/topic/1024744/linux/nvidia-387-12-breaks-power-reading-in-nvidia-smi-/post/5213384/#5213384

    So, for power draw on the 1050, you either get errant numbers with old versions or no numbers with the newer versions. The downgrade to a previous version is done via locally attached display using these instructions from leenoox:

    The easiest way is LOCAL:
    1. I suggest closing all apps, ctrl-c on wdog, temp, miner
    2. click on the 4th icon on the left-side panel "Additional Drivers"
    3. in the new window click on "Additional Drivers" tab
    4. click on the "Using NVIDIA binary driver - version 384.90 from..."
    5. click on "Apply Changes" button <this can take a while>
    6. enter root password: miner1
    6. reboot

    1) I know, how to downgrade. Both your suggestions won't work. nvOC with Nvidia driver 384.90 for those who can't downgrade and have 1050Tis
    2) Any comparatively new driver up to 384.90 does right numbers, I checked with wattmeter.
    3) See images: first screenshot v0019-1.4 updated to v0019-2.0 and driver downgraded to 384.90, the second screenshot as you see PoisonXA edition of nvOC)
    https://imgur.com/a/UhGtx

  • lirai
    Newbie
    *
    Offline Offline

    Activity: 2
    Merit: 0


    View Profile
    January 08, 2018, 05:32:35 PM
     #5371
    Hi all, I am mining zec by zm and met some problem.
    My rig :
    Gpu 1063 x10 power limit set to 70w, 4g ram , cpu is g3930,  asus mining expert. Psu 750w x2
    nvoc 19-2

    The watchdog log shows gpu is lost and the watchdog try to reboot system to recovery gpu.
    the system then hang up.

    I also try to turn off the watchdog. The zm error msg is gpu launched timed out. Then the system become unstable and hang up in one or two move.

    Anyone met this problem before? I think if the watchdog can reboot system correctly  then the zm error will not be a problem.

    Thanks

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    January 08, 2018, 06:31:28 PM
     #5372
    Quote from: clixsenseinc on January 08, 2018, 04:47:05 PM
    Quote from: leenoox on January 08, 2018, 04:30:48 PM
    Quote from: clixsenseinc on January 08, 2018, 04:13:11 PM
    Quote from: papampi on January 08, 2018, 03:58:07 PM
    Quote from: clixsenseinc on January 08, 2018, 03:46:28 PM
    Quote from: Stubo on January 08, 2018, 02:17:04 PM
    Quote from: clixsenseinc on January 08, 2018, 01:59:10 PM
    Hello All, I am running the latest version of nvoc and it was working perfectly with NICE_EQUIHASH. I have 2 Nvidia 980 ti cards and was averaging about $12 per day. Suddenly the machine rebooted and now the miner will not start. I am getting an error about GPU Utilization and unable to resolve host.





    Did something happen to my video cards or PC?

    Your thoughts?

    Thanks

    This appears to be a DNS or internet access issue given the errors. Can you ping your pool?

    Your right, no internet. I have an IP from the router but cannot do anything. I even attempted to assign a manual IP and no go. What else should I check?

    Upgrade to v0019-2.0, it has better internet check to prevent miner restart and rig start
    And soon pool watch will be added too

    Thanks but I need internet to run the update. I mounted a second usb but without internet I cannot run the update.

    Restart your router and rig. That usually restores internet connection.

    I have done that many times. Tried dhcp and static but it's just not working. It doesn't make sense. Changed cat 5 cables too. I can ping the gateway but if I try to ping yahoo.com or pull up Firefox and go to google.com it fails.

    There were quite a few issues with 19-1.4 version of nvoc. Not worth trying to figure out and fix the problem when there is newer and much improved version 19-2.0. Why don't you give 19-2.0 a try?
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • leenoox
    Full Member
    ***
    Offline Offline

    Activity: 200
    Merit: 101



    View Profile
    January 08, 2018, 06:40:41 PM
     #5373
    Quote from: lirai on January 08, 2018, 05:32:35 PM
    Hi all, I am mining zec by zm and met some problem.
    My rig :
    Gpu 1063 x10 power limit set to 70w, 4g ram , cpu is g3930,  asus mining expert. Psu 750w x2
    nvoc 19-2

    The watchdog log shows gpu is lost and the watchdog try to reboot system to recovery gpu.
    the system then hang up.

    I also try to turn off the watchdog. The zm error msg is gpu launched timed out. Then the system become unstable and hang up in one or two move.

    Anyone met this problem before? I think if the watchdog can reboot system correctly  then the zm error will not be a problem.

    Thanks

    Obviously not a watchdog problem as your system hangs up without watchdog too. Something wrong with one of your GPU's. It might be bad cable, bad riser or bad GPU. Try to troubleshoot by swapping cables, riser, even GPU.

    Notice which GPU reports problem by watchdog or your miner, then run
    Code:
    ./nvOC gpumap

    To determine the physical location of the problematic GPU.
    nvOC easy-to-use Linux Nvidia Mining OS with WhatToMine.com auto switch
    nvOC - V0019-2.0 Community Release

  • walliskmine
    Newbie
    *
    Offline Offline

    Activity: 4
    Merit: 0


    View Profile
    January 08, 2018, 06:57:00 PM
     #5374
    Quote from: walliskmine on January 08, 2018, 10:36:22 AM
    Quote from: CryptAtomeTrader44 on January 08, 2018, 12:50:46 AM
    Quote from: walliskmine on January 08, 2018, 12:29:53 AM
    Quote from: fullzero on October 22, 2017, 09:22:56 PM
    Quote from: mikespax on October 19, 2017, 09:17:35 PM
    Is there a simple command to update xorg? I think this is the solution to my driver/temp control problems.

    this will generate one that enables most features


    Code:
    sudo nvidia-xconfig --enable-all-gpus --cool-bits=31
    for normal gpus


    Code:
    sudo nvidia-xconfig --enable-all-gpus --cool-bits=12
    for P106_100s


    My guess is your problem is related to the P106_100s and normal GPUs working best with different coolbits settings.  Hard to know without one of those to test with.




    hey just wondering if anyone can help? A puzzle for someone....  
    I have 12 x1080's and have always had an issue wth the auto temp/fan speed for the 12th (GPU 11). Anyways, since I updated to the NVOC in dec to nvOC-19-2-update (by_fullzero_unofficial), it has mined anything no issues. and the only thing was as I mentioned..

    Suddenly the end of December it constantly crashes on Equihash on both ZM and EWBF. The error was always that GPU 11 was lost. Anyhow, after some digging I found that in the Nvidia X Server Settings for GPU 11 the box was not there to tick for the fan speed.

    After some more digging I found that in the etc/X11/xorg.conf file, the GPU 11 was not set correctly. It is in pci slot 18, and in the Section "Device" it only went up to PCI-17.

     I did as in the quote  sudo nvidia-xconfig --enable-all-gpus --cool-bits=31 and that didnt work either (so had to restore original), but it did give me all the correct pci locations of the GPU devices, so I have updated the xorg.conf  with the relevant pci settings.

    Now the  auto temp/fan speed errors have gone and the tick box appears in Nvidia X Server Settings for GPU 11 .  

    But, it still crashes on Equihash, it says
    "Unable to determine the device handel for GPU 0000:1200.0 GPU is lost."
     I  updated NVOC on the 4th JAN to the nvOC v0019-2.0 - community release. Any suggestions anyone?    

     Also, why does my  etc/X11/xorg.conf file say Im using 1050's when I am using 1080's? Does it even matter?

    I do not know if you have updated from version 0019-1.4 to version 19-2.0 with papampi scripts.

    If so, is it possible for you to try to use the latest papampi image from the links we just posted and apply the latest updates from papampi.

    Of course, you will not forget to save your current system with HDDrawCopy or diskdump (dd) for example, in another medium.

    I had problems with version 19-1.4 too. not of this type, but I have a month since I installed the 19-2.0 and repared the disk by adding swap. I know it has nothing to do with the problem you are describing

    I am using https://github.com/papampi/nvOC_by_fullzero_Community_Release 

    I would do the reimaging, but my linux command knowlege is limited, and I a bit unsure as to how to go about that, if anyone could take me though that great ly appreciate it :-)



    so.....

    I gave it another crack with the
    Code:
    sudo nvidia-xconfig --enable-all-gpus --cool-bits=31
    for normal gpus and rebooted. terminal ran as normal and came up with error as before, I closed terminal before it had chance to reboot,   reopended terminal and hey presto its all working as it should and not crashing on equihash. Now the fan tick box comes up in the Nvidia X Server Settings for GPU 11, and no more GPU 11 errors. phew

  • papampi
    Full Member
    ***
    Offline Offline

    Activity: 686
    Merit: 140


    Linux FOREVER! Resistance is futile!!!


    View Profile WWW
    January 08, 2018, 08:01:12 PM
     #5375
    Quote from: lirai on January 08, 2018, 05:32:35 PM
    Hi all, I am mining zec by zm and met some problem.
    My rig :
    Gpu 1063 x10 power limit set to 70w, 4g ram , cpu is g3930,  asus mining expert. Psu 750w x2
    nvoc 19-2

    The watchdog log shows gpu is lost and the watchdog try to reboot system to recovery gpu.
    the system then hang up.

    I also try to turn off the watchdog. The zm error msg is gpu launched timed out. Then the system become unstable and hang up in one or two move.

    Anyone met this problem before? I think if the watchdog can reboot system correctly  then the zm error will not be a problem.

    Thanks

    I had some similar issue with Asus mining export 19x, I couldnt get it to go over 12 cards
    and on 12 cards it was freezing before watchdog could catch the error and reboot
    It just magically solved by moving around 1x risers in PCIe slots, couldnt figure out what was the problem.
    And more weird ... when changed back to problematic slots, problem didnt came back and was solved
    nvOC - Community Release - free-easy-to-use Nvidia Mining OS
    nvOC - Community Release - GitHub
    فروش پیچ و مهره

  • fk1
    Full Member
    ***
    Offline Offline

    Activity: 216
    Merit: 100


    View Profile
    January 08, 2018, 09:05:29 PM
    Last edit: January 08, 2018, 09:15:44 PM by fk1
     #5376
    Hi! When I edit something in 1bash, I do screen -r miner and then ctrl+c to quit the process. How can I restart mining process with updated 1bash? I always do sudo reboot and feel retarded cuz there surely is a better way but I didn't figure it out

    e: somehow I cant mine eth on miningpoolhub, I get a unknown response in claymore. someone knows why this is the case?

  • CryptAtomeTrader44
    Full Member
    ***
    Offline Offline

    Activity: 340
    Merit: 103

    It is easier to break an atom than partialities AE


    View Profile
    January 08, 2018, 09:29:24 PM
     #5377
    Quote from: Jplays on January 08, 2018, 03:36:36 AM
    I had the WTM switch working well with the new nice hash algo adds. I seen it switch sucessfully a few times between  a few no troubles. I added some other coins seen them switch successfully. Now it seems when I have WTM switch on I'm getting a bash home/m1/2unix terminating error and terminal restarts miner looks like its about to start mining and nothing happens rinse repeat. I have it single coin mining right now but wondering whats wrong. I noticed the changes had some NICE- not NICE_ changes, anything off there? Also noticing its changing my COIN= to "NICE" not NICE_EQUIHASH or any others

    Look at here

    https://bt.irlbtc.com/view/1854250.msg27183130#msg27183130

    @papampi

    I already reported this pb filtering in the python script with a dash ( -) instead of an underscore( _ ).
    I was told that if I did that I would have problems. But I had no pb until nicehash closed following their $ 65 million stealing deal!

    I put the changes on the carpet recently, and it worked until the pools rejected my sharing from one hour to another. I opened a ticket at home but like all pools, exchanges and many other instances of the crypto world, they are overwhelmed, I guess.

    I have deactivated nicehash for the moment and I am waiting to know by the end of the month when will they give me my little 60 kSAT "magot".

  • fk1
    Full Member
    ***
    Offline Offline

    Activity: 216
    Merit: 100


    View Profile
    January 08, 2018, 09:44:50 PM
     #5378
    Quote from: fk1 on January 08, 2018, 09:05:29 PM
    Hi! When I edit something in 1bash, I do screen -r miner and then ctrl+c to quit the process. How can I restart mining process with updated 1bash? I always do sudo reboot and feel retarded cuz there surely is a better way but I didn't figure it out

    e: somehow I cant mine eth on miningpoolhub, I get a unknown response in claymore. someone knows why this is the case?
    I fixed my problem with "-esm 2"

  • planet_coin
    Newbie
    *
    Offline Offline

    Activity: 2
    Merit: 0


    View Profile
    January 08, 2018, 11:39:09 PM
     #5379
    Hello mining community, I have built a 13 GPU mining rig which currently only has 5 GPU's installed (4 1070's and 1 1080 TI). I am running NVOC V0017. My machine appears to be mining but when I login to CoinMine.pl it is not registering a hash rate at all and there is no currency going into the wallet address. I've attached some screenshots. I am a newbie so bear with me here! Thanks in advance. https://imgur.com/a/RFdZN

  • CryptAtomeTrader44
    Full Member
    ***
    Offline Offline

    Activity: 340
    Merit: 103

    It is easier to break an atom than partialities AE


    View Profile
    January 08, 2018, 11:55:16 PM
     #5380
    Quote from: planet_coin on January 08, 2018, 11:39:09 PM
    Hello mining community, I have built a 13 GPU mining rig which currently only has 5 GPU's installed (4 1070's and 1 1080 TI). I am running NVOC V0017. My machine appears to be mining but when I login to CoinMine.pl it is not registering a hash rate at all and there is no currency going into the wallet address. I've attached some screenshots. I am a newbie so bear with me here! Thanks in advance. https://imgur.com/a/RFdZN

    Read the readme ath this webpage :
    https://github.com/papampi/nvOC_by_fullzero_Community_Release

    And download + install nvOC-v0019-2.0 after you had backup your 1bash file. Most improvments. You'll need 30-45 min to report your several 1bash parameters but thi is not lost time. ANd you'll be updated for the next update script.

    Change pool if you have doubt about coinmine.pl
    Pages: « 1 ... 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 [269] 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 ... 352 »
      Print  
Page 268
Viewing Page: 269

IRLBTC™ © 2025 IRLBTC.com