Don't quote me on this but I think xorg problem refers to you booting using your onboard video rather than the graphics card.. you should use PEG not IGD.

You can look at this post, and follow links to my anteriors posts :
https://bt.irlbtc.com/view/1854250.msg27669739#msg27669739

Happy minning.

The question was asked much, much earlier in this thread but I saw no answer:

How do you set up ETN (Electroneum) to mine in nvOC?
I tried it using the ETN syntax in v0019-2.0.0003 but I received lots of errors and the system finally shutdown.

Hey everyone. I'm having an issue. My miner tends to reset on me, and when it does it seems like the operating system gets into a bad state, and can't be restarted again unless I rewrite the storage device with a fresh copy of nvoc. Here is information on my miner

PSU: Corsair AX860
Motherboard: Biostar TB250 Pro (has 12x PCIE slots)
Video Cards: 5 GTX 1060s and 1 1050 TI
Storage: SanDisk 120 GB connected via StarTech USB 3.0 to 2.5 Sata HDD/SSD cable
Processor: i5 6600k with Hyper 212 cooler(to be replaced soon with G3900 with stock cooler)
Ram: 16GB
Current Power Draw: 690 watts

Here are shots of the miner in case anyone is interested.
https://imgur.com/Pkes5Su
https://imgur.com/S49LlKl


I'm currently mining ETH, and I'm using the default clocks in the oneBash. Which is 100 for the core, and 100 for the memory.

During my debugging process while trying to figure out what was going on I set the bios to use integrated graphics, and plugged my monitor into the integrated graphics port on the mother board. I was able to pick this up on screen.
https://imgur.com/61g5FYP

Usually when i do this the miner will boot loop(A normal quirk for the TB250). So I'm guessing this is related to the problem I have, but I'm not sure how to move on from here

Did you connect monitor to integrated at first boot?
If yes I think easiest way is to re-image, disable IGD, connect monitor to main PCIe slot and boot.

So i have used the new nvoc 14, and its great Smiley

I have a Zotec Geforce GTX 1070 amp card.... and i want to know

   1. how do i switch the led lights off?
   2. How can i overclock the card in Ubuntu?

   many thanks for your help in advance

Thats a known error in v0019-1.4
You can edit  hostname and hosts inetc and set the correct values and reboot
Or you can update to v0019-2.0 with update script and let it fix it and update to v0019-2.0

GPU LED control is available in v0019-2.0
have a look at 2 posts before to see how to update your v0019-1.4 to v0019-2.0

All settings available in 1bash

LED settings(V19-2.0):

Overclock settings (available in all versions):

It seems nvidia driver had a corrupted update, what was your nvOC version.

As soon as rig started, close gnome-terminal and run :


It should fix the corrupted update.
I recommend update to latest