Do you mean that the provided by WTM for nicehash are inaccurate?

You seem to add that it is the most profitable algo nist5 at the moment, can you give examples?

NB: I actually thought that this algo is very popular looking for a pool for VIVO since no one answered me to find the best ,, I ended up choosing myself on bulwarkpool.com.Et precisely on this pool, the nist5 is very high for mining BWK

To add GoByte(GBX) (Neoscrypt) to the selection of cryptocurrency in 1bash script file and therefore also in the WTM switch:

1 Find TZC Variables in 1bash file (just below the VIVO variables, you will copy paste as a template Under TZC lines):



Add this below to the 0miner script file (in the same way below the command to launch the TZC ccminer (and you can copy TZC but be careful to replace TZC_ by GBX_ in the whole command):


Don't mine directly to Cryptopia Wallet Address because if Maintenance on GBX Blockchain, cryptopia will be slow to reput online a wallet, and you risk to mine in the void for all  the time cryptopia GBX wallet would be offline.

To consult your pool balance :
https://www.unimining.net/?address=GBX_Wallet Address

You can mine GBX on other pools :
http://www.zpool.ca/site/mining => 2% pool fee
http://pool.hashrefinery.com/ => 1.25% pool fee
http://yiimp.eu/site/mining => 2% fee
https://altminer.net/ => 0.9% fee
https://bilbotel.fr/ => 0.5% but looks have very few miners and hash power
https://us1.gobyte.network/ =>0,5% fee only 12 miners active at this time !
https://asia1.gobyte.network/ => difficulty to join it from europe where i live.

More pools on their webpage, I do not have all consulted :
 https://www.gobyte.network/#!

Happy Mining

Add it in WTM_AUTO_SWITCH_COINS list in 1bash
Restart your miner process in ssh console by this commands or reboot your rig :
./nvOC stop
./nvOC start (it will reboot your rig)

EDIT 05-01-18 18h42 : It seems unimining have some problem with their neoscrypt pools and GBX looks offline ...I désactivate it for the moment, but you can try other pools and give us your REX here.

EDIt 2 : It seems altminer.net permit mining GBX correctly. Not the pool with lowst fee but seems stable and operationnal for me.

Hello!
I would like to try altcoin mine with an automatic translation into the BTC. Which way is better?
ZPOOL, MPH or NiceHash?

If everything is clear with nacehash, but on the other(ZPOOL, MPH) can I switch with WTM_auto_switch ?

If you choose nicehash, you will undermine by algo.

If you choose Zpool, you can mine by ALGO, but also by individual crypto.

On MPH, you can choose on their web page to which crypto you want to be paid.

On the other hand, it seems to me that Zpool takes a fee of 2%, nicehash 3% and MPH 0.9%

As far as I am concerned, "I eat all the racks", that is to say that I do not hang on a single pool. It's more complicated to manage and check, but you'll find it quickly if you want to trade to sell your coins at the best time and price.

Still experiencing hangups, after updates.
Any pointers to fixes, in case this is known ubuntu issue?

--
Tigel

I just wanted to tell you that I use a motherboard of this brand and that Ubuntu 16 detects it perfectly, nothing more ...

I feel as soon as you felt attacked :-(

It was not the goal.

Hi kk003,

This is awsome!! I will modify the code according the my setup.
As far as I can see from a quick look at the the code, the script assumes a rig is frozen if it doesn't respond to pings. Is it correct?
In the past I had rigs that were clearly frozen, but were still responding to pings. That is why, instead of pinging I check if the SSH port is open on the rig using netcat:


(w5 is a timeout of 5 seconds)

Thanks again :-)

The script checks that temp room is too high, if so turnoff the rig, then wait 120 seconds and ping the rig again (it should be power off by now).
I agreed with you some times the ping is not enough to make sure that the rig is on/off. I should add the bit with netcat as a double check.
Thx. 

I was having some issues this week with some pools and decide to rewrite the code for pool check in watchdog, it was supposed to be in v19-2.0 but we let it slide for that time.

It works almost same as network check but instead of checking for network it checks for pool and wait if its unreachable to prevent miner restart and eventually rig restarts.
Then After I wrote it I thought why wait and waste time when we can switch to an alternate pool
So I rewrite it again to add an alternate pool in 1bash whether its supported by the miner or not.
What left to do is to check the first pool and switch back as soon as it becomes available.


So here is my question:
How important it is for you guys to have an alternate pool?
And how important it is to switch back to main pool?


I'm asking this because I wrote the code for myself and to make it work with rest of miners and coins it needs more changes so I don't want to work on something not so useful

I would totally f... love that ;-)

regards